Fractal root system of Melica przewalskyi along different aspect in degraded grassland

Aims Fractal root system is phenotypic plasticity result of plant root architecture to respond to environmental heterogeneity, may reflect the growth strategy of plants to adapt to environmental conditions. Our objective was to explore the relationship between root fractal dimension and fractal abundance of fractal root system of Melica przewalskyi population in response to aspect variation in the northwest of China. Methods The study site was located in a degraded alpine grassland on the northern slope in Qilian Mountains, Gansu Province, China. Survey and sampling were carried out at 40 plots which were set up along four slope aspects transects with 20 m distance between adjacent plots. Handheld GPS was used to determine the elevation, longitude and latitude of each plot. ArcGIS was used to set up digital elevation model (DEM). Community traits were investigated and six individuals roots of M. przewalskyi were collected randomly at each plot. The samples were cleaned and divided into different organs, then scanning the root with the Win-RHIZO for measurements of fractal dimension and fractal abundance in laboratory, and their biomass were then measured after being dried at 80 °C in an oven. Important findings With the slope aspect turned from north to east, west, and south, the density, height and soil moisture content of the plant community displayed a pattern of initial decline, the height, density, root fractal abundance of M. przewalskyi increased and the root fractal dimension decreased. The root fractal dimension was negatively associated with the fractal abundance in all aspects, but the relationship varied along the slope aspects gradient; there was a highly significant negative correlation (p < 0.01) between the root fractal dimension and fractal abundance at north slope and south slope aspect, whereas the correlation only reached a significant level (p < 0.05) at the east slope aspect and west slope aspect; indicating that there is a trade-off between the root fractal dimension and fractal abundance. In addition, when the slope aspect changed from north to east, west and south, the standardized major axis (SMA) slope of the regression equation in the scaling relationships between root fractal dimension and fractal abundance increased (p < 0.05), indicating that the roots of M. przewalskyi at the droughty southern slope have less branch and more sparse in the same soil volume of root exploitation and utilization. Consequently, the resource allocation pattern on reasonable trade-off between root fractal dimension and fractal abundance in different slope aspect of M. przewalskyi, reflects the relationship between the income and the cost of construction of plant root architecture.     

Structural adaptations of the femur and humerus to arboreal and terrestrial environments in three species of macaque

One reason to measure cross-sectional structural properties of primate long bones is to define mechanically relevant complexes of traits that describe the adaptation of bone to different biomechanical environments. This can be effectively accomplished when congeneric species having different postural and locomotor behaviors are compared. This paper compares the cross-sectional geometry of the femur and humerus in three behaviorally different macaque species as a basis for defining such patterns. Cross-sectional moments of inertia in the standard anatomical planes were calculated at five locations along the diaphyses of the femur and humerus in Macaca fascicularis, M. nemestrina, and M. mulatta. The data suggest that the "barrel-shaped" femur is associated with behaviors for which long limbs and small body size are an asset. This may be associated with, but is not restricted to, leaping behaviors. The data also suggest that structural rigidity of the femur and humerus is greater per unit body weight in primates that spend significant amounts of time in terrestrial environments than in those that are more restricted to climbing in arboreal environments.     

X-ray and model-building studies on the specificity of the active site of proteinase K

Proteinase K, the extracellular serine endopeptidase (E.C. 3.4.21.14) from the fungus Tritirachium album limber, is homologous to the bacterial subtilisin proteases. The binding geometry of the synthetic inhibitor carbobenzoxy-Ala-Phechloromethyl Ketone to the active site of proteinase K was the first determined from a Fourier synthesis based on synchrotron X-ray diffraction data between 1.8 Å and 5.0 Å resolution. The protein inhibitor complexes was refined by restrained least-squares minimization with the data between 10.0 and 1.8 Å. The final R factor was 19.1% and the model contained 2,018 protein atoms, 28 inhibitors atoms, 125 water molecules, and two Ca²⁺ ions. The peptides portion of the inhibitor is bound to the active center of proteinase K by means of a three-stranded antiparallel pleated sheet, with the side chain of the phenylalanine located in the P1 site. Model building studies, with lysine replacing phenylalanine in the inhibitor, explain the relatively unspecific catalytic activity of the enzyme.     

A method for determining overall protein fold from NMR distance restraints

Summary We describe a simple method for determining the overall fold of a polypeptide chain from NOE-derived distance restraints. The method uses a reduced representation consisting of two particles per residue, and a force field containing pseudo-bond and pseudo-angle terms, an electrostatic term, but no van der Waals or hard shell repulsive terms. The method is fast and robust, requiring relatively few distance restraints to approximate the correct fold, and the correct mirror image is readily determined. The method is easily implemented using commercially available molecular modeling software.     

Prospective theoretical and experimental study towards electrochemically grafted poly(N-vinyl-2-pyrrolidone) films on metallic surfaces

Quantum chemistry calculations of equilibrium geometry, atomic charges, dipole moment, and frontier orbital energies are carried out on model N-vinyl-2-pyrrolidone, its radical anion and cation, and three protonated derivatives. Attempts to obtain poly(N-vinyl-2-pyrrolidone) films grafted on nickel and platinum electrodes, respectively by cathodic and anodic polarizations, are reported. A thin, covering and insulating film is obtained on the Pt anode, as indicated by surface characterizations carried out with UPS and IRRAS spectroscopies. The fact that the film remains adherent to the metallic surface in spite of a permanent contact with an acetonitrile solution in which poly(N-vinyl-2-pyrrolidone) is soluble suggests that chemisorption has indeed been achieved.     

Solution-state structure by NMR of zinc-substituted rubredoxin from the marine hyperthermophilic archaebacterium Pyrococcus furiosus.

The three-dimensional solution-state structure is reported for the zinc-substituted form of rubredoxin (Rd) from the marine hyperthermophilic archaebacterium Pyrococcus furiosus, an organism that grows optimally at 100 degrees C. Structures were generated with DSPACE by a hybrid distance geometry (DG)-based simulated annealing (SA) approach that employed 403 nuclear Overhauser effect (NOE)-derived interproton distance restraints, including 67 interresidue, 124 sequential (i-j = 1), 75 medium-range (i-j = 2-5), and 137 long-range (i-j > 5) restraints. All lower interproton distance bounds were set at the sum of the van Der Waals radii (1.8 A), and upper bounds of 2.7 A, 3.3 A, and 5.0 A were employed to represent qualitatively observed strong, medium, and weak NOE cross peak intensities, respectively. Twenty-three backbone-backbone, six backbone-sulfur (Cys), two backbone-side chain, and two side chain-side chain hydrogen bond restraints were include for structure refinement, yielding a total of 436 nonbonded restraints, which averages to > 16 restraints per residue. A total of 10 structures generated from random atom positions and 30 structures generated by molecular replacement using the backbone coordinates of Clostridium pasteurianum Rd converged to a common conformation, with the average penalty (= sum of the square of the distance bounds violations; +/- standard deviation) of 0.024 +/- 0.003 A2 and a maximum total penalty of 0.035 A2. Superposition of the backbone atoms (C, C alpha, N) of residues A1-L51 for all 40 structures afforded an average pairwise root mean square (rms) deviation value (+/- SD) of 0.42 +/- 0.07 A. Superposition of all heavy atoms for residues A1-L51, including those of structurally undefined external side chains, afforded an average pairwise rms deviation of 0.72 +/- 0.08 A. Qualitative comparison of back-calculated and experimental two-dimensional NOESY spectra indicate that the DG/SA structures are consistent with the experimental spectra. The global folding of P. furiosus Zn(Rd) is remarkably similar to the folding observed by X-ray crystallography for native Rd from the mesophilic organism C. pasteurianum, with the average rms deviation value for backbone atoms of residues A1-L51 of P. furiosus Zn(Rd) superposed with respect to residues K2-V52 of C. pasteurianum Rd of 0.77 +/- 0.06 A. The conformations of aromatic residues that compose the hydrophobic cores of the two proteins are also similar. However, P. furiosus Rd contains several unique structural elements, including at least four additional hydrogen bonds and three potential electrostatic interactions.(ABSTRACT TRUNCATED AT 400 WORDS)     

Computed tomography and automated image analysis of prehistoric femora

Non-invasive characterization of limb bone cross-sectional geometry would be useful for biomechanical analyses of skeletal collections. Computed tomography (CT) is potentially the method of choice. Additionally, CT images are suitable for automated analysis. CT is here shown to be both accurate and precise in the analysis of cross-sectional geometry of prehistoric femora. Beam hardening artifacts can be reduced by using a water bath. As the availability of CT for research increases, both bone density and geometry could be determined simultaneously with this method.     

Hand dominance and bilateral asymmetry in the structure of the second metacarpal

Bilateral asymmetry in the structure of the second metacarpal was examined in relation to functional hand dominance in a large, clinically nonselected, healthy population sample from the Baltimore Longitudinal Study of Aging. Bilateral bone measurements were made from anteroposterior hand radiographs of a total of 992 individuals, 609 males and 383 females, with an age range of 19–94 years. Hand dominance was determined on the basis of personal impression. Total width and medullary width at the midshaft of the second metacarpal were measured to 0.05 mm using a Helios caliper. These two measurements were used to derive cortical thickness, cortical bone area, periosteal (total) area, medullary area, percent cortical area, and the second moment of area in the mediolateral plane. In both right and left-handed individuals, statistically significant side differences were found in the calculated bone areas and the second moment of area, with the dominant hand being larger. Cortical thickness did not show significant side-related differences for either handedness. These results show that functional handedness leads to periosteal and endosteal expansion of the second metacarpal cortex on the dominant side, increasing bone strength without increasing cortical thickness. This is the first time this pattern of asymmetry has been reported in left-handers as well as right-handers. Our results argue for the primacy of environmental (mechanical) effects in determining bilateral asymmetry of limb bone structural properties. © 1994 Wiley-Liss, Inc.     

Diversity of the growth patterns of Bacillus subtilis colonies on agar plates

Abstract A Bacillus subtilis strain showed a variety of colony growth patterns on agar plates. The bacterium grew to a fractal colony through the diffusion-limited aggregation process, a round colony reminiscent of the Eden model, a colony with a straight and densely branched structure similar to the dence branching, morphology, a colony spreading without any openings, and a colony with concentric rings, on plates with various agar and nutrient concentrations. The microstructures of these colonies were also characteristic and dynamic. The patterns of these bacterial colonies were thought to grow in relation to the diffusion of nutrient in the agar plate.