Feeding of the Bat,Sturnira lilium,on Fruits of Solanum riparium Influences Dispersal of this Pioneer Tree in Forests of Northwestern Argentina

The influence of fruit ingestion by the bat, Sturnira lilium, on germination of the seeds of the tree Solanum riparium was studied in a secondary rain forest in northwestern Argentina. Bat frequencies in disturbed areas were analyzed by mist net captures. Germination rates were determined for seeds collected from trees and bat feces. S. lilium was the most abundant fruit bat in the study area. Fruit digestion and the passage of seeds through the intestine did not significantly affect germination in S. riparium. In this case the fruit bats, therefore, probably provide only seed dispersal.     

HAM: A new epitope-tag for in vivo protein labeling

The ability to metabolically label proteins with ³⁵S-methionine is critical for the analysis of protein synthesis and turnover. Despite the importance of this approach, however, efficient labeling of proteins in vivo is often limited by a low number of available methionine residues, or by deleterious side-effects associated with protein overexpression. To overcome these limitations, we have created a methionine-rich variant of the widely used HA tag, called HAM, for use with ectopically expressed proteins. Here we describe the development of a series of vectors, and corresponding antisera, for the expression and detection of HAM-tagged proteins in mammalian cells. We show that the HAM tag dramatically improves the sensitivity of ³⁵S-methionine labeling, and permits the analysis of Myc oncoprotein turnover even when HAM-tagged Myc is expressed at levels comparable to that of the endogenous protein. Because of the improved sensitivity provided by the HAM tag, the vectors and antisera described here should be useful for the analysis of protein synthesis and destruction at physiological levels of protein expression.     

Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

Tidal flows and sediment budgets for a salt-marsh system,Essex, England

Studies of tidal flows in salt-marsh creeks in Essex, England, show large variations in water velocity during different tidal cycles, particularly between tides below, at, and above marsh level. Water level, velocity and suspended sediment concentration have been monitored at 5-min intervals during 700 tidal cycles during the year March 1982–March 1983, and the data are being used to calculate sediment budgets for the creek system studied. Completed analyses for two of the tidal cycles show a large positive sediment flux. Because of the importance of velocity in controlling total discharge through a creek cross-section, and hence its effect on total sediment movement, we cannot extrapolate from these two below-marsh tides to any general conclusions about marsh erosion or accretion. We use these preliminary data both to demonstrate our methods and to indicate some of the complexities involved in the analysis.Acknowledgements: This work has been supported by the Natural Environment Research Council. We thank the Philip Lake Fund for financial assistance and the Department of Geography, Cambridge University, for much material support. Mr D. J. Fisher kindly gave access to his land, and Mr W. Bailey helped us greatly. We also thank Mr A. St Joseph for his help, Mr M. Diver for practical support, and Dr J. S. Pethick for discussion.     

Fluorescent analysis of alpha-keto acids in serum and urine by high-performance liquid chromatography

A selective procedure using synthetic substrates for determination of exo-1,4,-beta-glucanases in a mixture of exoglucanases , endoglucanases , and beta-glucosidases is formulated. The heterobiosides , p- nithrophenyl -beta-D- cellobioside ( pNPC ) or p-nitrophenyl-beta-D-lactoside ( pNPL ), were used as selective substrates for the measurement of exoglucanase activity. The exoglucanases (especially cellobiohydrolases , which split off cellobiose units from the nonreducing end of the cellulose chain) specifically act on the agluconic bond (between p-nitrophenyl and the disaccharide moiety) and not on the holosidic bond (between the two glucose units of cellobiose). The interfering effect of beta-glucosidase, which acts on both agluconic and holosidic bonds, is overcome by the addition of D-glucono-1,5-delta-lactone, a specific inhibitor of beta-glucosidases. The interference of endoglucanases , which also act on both agluconic and holosidic bonds, can be compensated for by prior standardization of the assay procedure with a purified endoglucanase from the studied mixture of cellulases.     

Recovery of a bacterial sub-population from sewage using immunofluorescent flow cytometry and cell sorting

Abstract The effectiveness of immunofluorescence flow cytometry and cell sorting to detect, quantify and separate indigenous bacterial populations present in low concentrations in sewage outflow was investigated. Preparatory experiments for targeted recovery revealed indigenous, immunoglobulin-G-binding particles present at low levels in sewage outflow samples taken from Coniston Water. Fluorescence-activated cell sorting of this population was employed to enrich for these particles, which were confirmed as bacterial cells. This cell population comprised approximately 23% of the total plate count on MacConkey agar before cell sorting, rising to approximately 95% after sorting. These results corresponded to cell densities of less than 5% of the total plate count on R2A agar. Taxonomic tests suggested the bacterium to be Ochrobactrum anthropi .     

Genetic differentiation of Elysia timida (Risso, 1818) populations in the Southwest Mediterranean and Mar Menor coastal lagoon

Genetic variation at 10 enzyme loci was analysed in Elysia timida sacoglossan mollusc samples, originating from both coastal lagoon and marine sites. The observed heterozygosity ranged from 0.390 (Los Urrutias) to 0.277 (Tabarca). Marine and coastal lagoon populations were characterised by exclusive alleles.     

Phase transition kinetics of phosphatidic acid bilayers A stopped-flow study of the electrostatically induced transition

The kinetics of the electrostatically induced phase transition of dimyristoyl phosphatidic acid bilayers was followed using the stopped-flow technique. The phase transition was triggered by a fast change in the pH or the magnesium ion concentration and followed by recording the time dependence of the absorbance. When the phase transition was induced by a pH jump the time course of the absorbance could be described by two exponentials, their time constants displaying the for cooperative processes characteristic maximum at the transition midpoint. The time constants are in the 10 and 100 ms range for the H⁺ triggered transition from the fluid to the ordered state. A third slower process shows no appreciable temperature dependence and is probably caused by vesicle aggregation. For the OH^--induced transition fron the ordered to the fluid state the time constants are in the 100 and 1000 ms range. The fluid-ordered transition could also be triggered by addition of magnesium ions. Of the several observed processes only the fastest in the 10–100 ms time range could definitely be assigned to the fluid-ordered transition while the others are due to aggregation phenomena. The experimental data were compared with results obtained from pressure jump experiments and could be interpreted on the basis of theories for non-equilibrium relaxation.     

How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.