Effect of different levels of concentrate on ruminal microorganisms and rumen fermentation in Nellore steers

The aim of this study was to investigate the effect of different dietary levels of concentrate on feed intake, digestibility, ruminal fermentation and microbial population in steers. Eight Nellore steers fitted with ruminal cannulas were used in a double 4 × 4 Latin square design experiment. The dietary treatments consist of four different proportions of concentrate to roughage: 30:70, 40:60, 60:40 and 80:20% in the dry matter, resulting in Diets 30, 40, 60 and 80, respectively. The roughage was corn silage, and the concentrate was composed of corn, soybean meal and urea. Apparent digestibility of organic matter and crude protein showed a linear association with concentrate proportion (p = 0.01), but the increased concentrate levels did not affect the digestibility of fibre. The lowest ruminal pH-values were observed in animals fed with Diet 80, remaining below pH 6.0 from 6 h after feeding, while in the other diets, the ruminal pH was below 6.0 not before 12 h after feeding. After feeding Diet 80, the ammonia concentration in the rumen was significantly the highest. Higher dietary concentrate levels resulted in a linear increase of propionic acid concentrations, a linear reduction of the ratio acetic acid to propionic acid (p < 0.01) and a linear increased synthesis of microbial nitrogen (p < 0.001). The predicted production of methane was lower in diets with greater amounts of concentrate (p = 0.032). The population of methanogens, R. flavefaciens and R. albus decreased with higher concentrate levels, while the population of S. ruminantium increased (p < 0.05). The results indicate that greater amounts of concentrate do not decrease ruminal pH-values as much as expected and inhibit some cellulolytic bacteria without impairing the dry matter intake and fibre digestibility in Nellore steers.     

Parameters of fermentation and rumen microbiota of Nellore steers fed with different proportions of concentrate in fresh sugarcane containing diets

The objective of this study was to evaluate the effect of a fresh sugarcane-based diet and different roughage-to-concentrate ratios (70:30, 60:40, 40:60 and 20:80) on the rumen microbiota associated with rumen fermentation parameters and the intake and apparent digestibility of nutrients in Nellore steers. Eight rumen-cannulated Nellore steers (331 ± 8 kg BW) were distributed in a double 4 × 4 Latin square design balanced for the control of the residual effect. The ruminal pH decreased (p < 0.01) and the concentrations of N–NH₃, isovaleric and valeric acids increased linearly (p < 0.05) with an increase dietary concentrate level. Furthermore, an increased concentrate proportion reduced the population of Fibrobacter succinogenes and Ruminococus flavefaciens (p < 0.01) and increased the population of Selenomonas ruminantium and Megasphaera elsdenii (p < 0.01). The protozoa count revealed a predominance of the genus Entodinium. The synthesis of microbial N [g/d] and the efficiency of microbial synthesis [g of microbial N/kg of organic matter apparently digested in the rumen] increased as the proportion of concentrate was increased (p < 0.05). Therefore, it can be concluded that an increasing proportion of concentrate in sugarcane-containing diets enhances the synthesis of microbial protein and does not alter the fibre digestibility, although the population of fibre fermenting bacteria was reduced.     

Effects of whole linseed supplementation and treatment duration on fatty acid profile and endogenous bioactive compounds of beef muscle

Diet supplementation with oilseeds is known to improve the fatty acid profile of meat, but few studies have been carried out to determine the time required for the incorporation of a significant quantity of n-3 polyunsaturated fatty acids (PUFA) into meat from steers. Therefore, the present study aimed to assess the effects of linseed supplementation and feeding duration on the fatty acid profile, cholesterol and bioactive compounds of bovine meat. In total, 54 Friesian steers were randomly allocated during the finishing period into six experimental treatments following a 2×3 factorial design. The six treatments consisted of two diets, the control diet (CO) with no supplemental fat and the linseed diet (LS) containing 10% whole linseed, fed 40, 75 or 120 days before slaughter. At the end of each finishing period, steers from the CO and LS groups were slaughtered. After 8 days of ageing chemical analysis, the fatty acid profile, cholesterol content and bioactive compounds were determined from the longissimus thoracis muscle. Including linseed in the diet increased the content of monounsaturated fatty acids, CLA and n-3 PUFA, and reduced the proportion of saturated fatty acids and n-6 PUFA. The percentage of myristic fatty acid increased with the duration of feeding, regardless of diet and a decrease in PUFA and n-6 PUFA was observed in the CO and LS diets, respectively. Furthermore, meat from steers fed linseed showed an increased percentage of n-3 PUFA, linolenic acid, and EPA from 40 to 75 days of feeding, whereas vaccenic acid, CLA 9c,11t, and total CLA increased from 40 and 75 days but declined at 120 days. Beef from the linseed group had a higher content of bioactive substances such as creatine, carnosine and anserine than beef from the control group. The duration of feeding significantly affected the creatine concentrations, with an increase in the LS group from 40 to 75 days of feeding. Feeding linseed did not modify the cholesterol content, on average and the lowest cholesterol content was found in meat after 75 days of linseed administration. This study demonstrates that a short-term diet manipulation is sufficient to improve the nutritional properties of meat, including n-3 PUFA and bioactive compounds.     

Improvement of in-rumen digestibility of alfalfa forage by genetic manipulation of lignin O-methyltransferases

Lignin inhibits forage digestibility by ruminant animals, and lignin levels and the proportion of dimethylated syringyl (S) lignin monomers increase with progressive maturity in stems of forage crops. We generated transgenic alfalfa (Medicago sativa L.) with reduced lignin content and altered lignin composition. Down-regulation of caffeic acid 3-O-methyltransferase (COMT) reduces lignin content, accompanied by near total loss of S lignin, whereas down-regulation of caffeoyl coenzyme A 3-O-methyltransferase (CCoAOMT) reduces lignin content without reduction in S lignin. These changes are not accompanied by altered ratios of cell wall polysaccharides. Analysis of rumen digestibility of alfalfa forage in fistulated steers revealed improved digestibility of forage from COMT down-regulated plants, but a greater improvement in digestibility following down-regulation of CCoAOMT. The results indicate that both lignin content and composition affect digestibility of alfalfa forage, and reveal a new strategy for forage quality improvement by genetic manipulation of CCoAOMT expression.     

Influence of the diet and grazing on adipose tissue lipogenic activities and plasma leptin in steers

The objectives of the two experiments were to determine the respective effects and interactions of diet type (grass v. maize diets) and physical activity (grazing v. zero grazing) on lipogenic enzyme activities and adipose cell size in subcutaneous, perirenal and intermuscular adipose tissues and on plasma metabolites and hormones in Charolais steers. After weaning, the steers were assigned to two (Experiment 1, n = 24) or three (Experiment 2, n = 24) groups, with steers in Experiment 1 grazed grass or indoors maize-silage-fed and steers in Experiment 2 grazed grass, indoors cut grass- or indoors maize-silage-fed. Both experiments lasted for 23 months. All grass-fed animals were fed grass silage during the two winter seasons. During the two summer seasons, steers fed on grass were rotationally grazed on a perennial rye-grass pasture while steers fed on cut grass were fed indoors on freshly cut grass alone. Steers fed on maize silage were fed maize silage indoors during the entire experiment. All animals were reared for similar body weight and growth rates and slaughtered at the same age (31 to 32 months). Activities of lipogenic enzymes were significantly lower in the three adipose tissue sites of steers fed cut grass compared with maize silage, although there were less-marked effects in intermuscular adipose tissue. Plasma insulin and glucose concentrations were also lower in steers fed cut grass whereas plasma leptin concentration was similar. As body fat content was not affected by nutritional treatment, it is suggested that the decrease in potential lipogenic activity was associated with the nature of the diet and not to differences in available net energy. In other respects, grazed grass compared with eating cut grass did not affect lipogenic enzyme activities but decreased plasma leptin concentrations in the older steers and increased plasma non-esterified fatty acids and glucose concentrations without affecting adipose tissue weight and adipose cell size.     

Genetic markers that influence feed efficiency phenotypes also affect cattle temperament as measured by flight speed

Flight speed is a predictive indicator of cattle temperament and is associated with feed efficiency phenotypes. Genetic markers associated with both traits may assist with selection of calmer animals with improved economic value. A preliminary genome‐wide association study determined chromosomal regions on BTA9, and 17 were associated with flight speed. The genes quaking (QKI), glutamate receptor, ionotropic, AMPA 2 (GRIA2) and glycine receptor β (GLRB) were identified in these regions as potential functional candidates. Beef steers (n = 1057) were genotyped with SNPs located within and flanking these genes. One SNP located near QKI and one near GRIA2 were nominally associated with flight speed (P ≤ 0.05) although neither was significant after Bonferroni correction. Several studies have shown a correlation between flight speed and feed intake or gain; therefore, we also analyzed SNPs on BTA6:38–39 Mb known to be associated with average daily gain (ADG) and average daily feed intake (ADFI) for association with flight speed. Several SNPs on BTA6 were associated with flight speed (P ≤ 0.005), and three were significant after Bonferroni correction. These results suggest that the genes tested are unlikely to contribute to flight speed variation for our cattle population, but SNPs on BTA6 associated with ADG and ADFI may influence temperament. Use of these markers to select for economically important feed efficiency phenotypes may produce cattle with more desirable temperaments.     

Proopiomelanocortin gene polymorphisms and its association with meat quality traits by ultrasound measurement in Chinese cattle

Ultrasound technology was used to measure live animal meat traits instead of true carcass meat traits for beef production and cattle breeding by an increasing number of institutions. In this study, we analyzed the association between genetic polymorphisms of proopiomelanocortin (POMC) and ultrasound measurement traits in Chinese cattle. Using direct DNA sequencing in 322 individuals of 7 different cattle subpopulation, 7 SNPs were identified for genotyping within 790 bp region of intron 2 and exon 3 of POMC. 6586 T>G in intron 2 and 6769 C>T and 7216 C>T in exon 3 were significantly associated with ultrasound backfat thickness (UBF) (P < 0.05) and ultrasound loin muscle area (ULMA) (P < 0.01) in the total population; 6694 C>T, 6706 T>C, 6796 C>T and 6810 C>T in exon 3 were significantly associated with ULMA (P < 0.0001) in the total population. These results clearly suggest that these SNPs of POMC be benefit for selection of individuals with good quality meat in Chinese cattle breeding program. Following validation in other populations and breeds, these markers could be incorporated into breeding programs to increase the rate of improvement in carcass and meat quality traits.     

Influence of zinc on copper binding in tissue proteins of steers

Two experiments were conducted with steers fed diets containing 270 ppm copper either with or without 2050 ppm zinc. Liver biopsies were taken from steers biweekly for 10 wk for analysis. The steers were then killed; tissues were removed, homogenized, and centrifuged, and the pellets were extracted with mercaptoethanol (BME), and selected cytosols and extracts were subjected to gel filtration (Sephadex G-75). Copper and zinc were determined on the BME extracts, pellets after extraction, cytosols, and gel-filtration fractions. Copper accumulated at about the same rate in BME extract and in the extracted pellet, with the smallest amount in the cytosol. In contrast, over 70% of the zinc was present in the hepatic cytosols. Gel filtration of BME extracts revealed the greatest amount of copper in a low-molwt (MW) peak in addition to three minor peaks of copper. Within the hepatic cytosols, the greatest amount of copper accumulated in proteins of MW>75,000, the next greatest amount in 30,000-MW proteins, and the least amount with metallothionein (MT) of steers fed the diet with only copper added. In contrast, the greatest amount of copper was present with MT in hepatic cytosols of the steer fed a diet that included copper plus zinc. Hence the zinc status of steers influences the deposition of copper in the cytosolic proteins (as demonstrated by liver, kidney, and pancreas), but not in the intracellular fractions.     

Predicting feed intake using modelling based on feeding behaviour in finishing beef steers

Current techniques for measuring feed intake in housed cattle are both expensive and time-consuming making them unsuitable for use on commercial farms. Estimates of individual animal intake are required for assessing production efficiency. The aim of this study was to predict individual animal intake using parameters that can be easily obtained on commercial farms including feeding behaviour, liveweight and age. In total, 80 steers were used, and each steer was allocated to one of two diets (40 per diet) which consisted of (g/kg; DM) forage to concentrate ratios of either 494:506 (MIXED) or 80:920 (CONC). Individual daily fresh weight intakes (FWI; kg/day) were recorded for each animal using 32 electronic feeders over a 56-day period, and individual DM intakes (DMI; kg/day) subsequently calculated. Individual feeding behaviour variables were calculated for each day of the measurement period from the electronic feeders and included: total number of visits to the feeder, total time spent at the feeder (TOTFEEDTIME), total time where feed was consumed (TIMEWITHFEED) and average length of time during each visit to the feeder. These feeding behaviour variables were chosen due to ease of obtaining from accelerometers. Four modelling techniques to predict individual animal intake were examined, based on (i) individual animal TOTFEEDTIME relative expressed as a proportion of the dietary group (GRP) and total GRP intake, (ii) multiple linear regression (REG) (iii) random forests (RF) and (iv) support vector regressor (SVR). Each model was used to predict CONC and MIXED diets separately, giving eight prediction models, (i) GRP_CONC, (ii) GRP_MIXED, (iii) REG_CONC, (iv) REG_MIXED, (v) RF_CONC, (vi) RF_MIXED, (vii) SVR_CONC and (viii) SVR_MIXED. Each model was tested on FWI and DMI. Model performance was assessed using repeated measures correlations (R²_RM) to capture the repeated nature of daily intakes compared with standard R², RMSE and mean absolute error (MAE). REG, RF and SVR models predicted FWI with R²_RM = 0.1–0.36, RMSE = 1.51–2.96 kg and MAE = 1.19–2.49 kg, and DMI with R²_RM = 0.13–0.19, RMSE = 1.15–1.61 kg and MAE = 0.9–1.28 kg. The GRP models predicted FWI with R²_RM = 0.42–0.49, RMSE = 2.76–3.88 kg and MAE = 2.46–3.47 kg, and DMI with R²_RM = 0.32–0.44, RMSE = 0.32–0.44 kg, MAE = 1.55–2.22 kg. Whilst more simplistic GRP models showed higher R²_RM than regression and machine learning techniques, these models had larger errors, likely due to individual feeding patterns not being captured. Although regression and machine learning techniques produced lower errors associated with individual intakes, overall precision of prediction was too low for practical use.     

Daidzein enhances intramuscular fat deposition and improves meat quality in finishing steers

An experiment was conducted to determine the effects of soy isoflavone daidzein on carcass characteristics, fat deposition, meat quality, and blood metabolites in finishing steers. Fourteen crossbred steers were used in a 120-d finishing study. These steers were stratified by weight into groups and randomly allotted by group to one of two dietary treatments: (1) control and (2) daidzein (500 mg/kg concentrate). The steers were fed a 90% concentrate diet. Supplemental daidzein did not affect slaughter weight, hot carcass weight, and dressing percentage, but tended to reduce fat proportion (not including intramuscular fat) in carcass and backfat thickness of steers. The carcass bone proportion was greater in steers fed daidzein diets than those fed control diets. Daidzein supplementation reduced pH at 24 h after slaughtered and moisture content and increased isocitrate dehydrogenase activity, fat content (16.28% and 7.94%), marbling score (5.29 and 3.36), redness (a*), and chroma (C*) values in longissimus muscle relative to control treatment. The concentrations of blood metabolites including glucose, blood urea nitrogen, triglyceride, total cholesterol, non-esterified fatty acid, high-density lipoprotein cholesterol (HDL-C), and low-density lipoprotein cholesterol (LDL-C) were all lower in steers fed daidzein diets than those fed control diets. Current results suggest that supplemental daidzein can affect lipid metabolism, increase intramuscular fat content and marbling score, and improve meat quality in finishing steers. Daidzein should be a promising feed additive for production of high-quality beef meat.