The influence of the spectral composition of irradiance on primary production in the Eastern Scheldt (The Netherlands)

The error inin vivo ¹⁴C incubator measurements of primary production in the Eastern Scheldt when neutral density filters were used and the error obtained when no account was taken of the spectral changes in submarine irradiance that occur with increasing depth, were evaluated theoretically. By multiplying the photosynthetic action spectra of two marine algae by calculated irradiance in the euphotic layer using Kd and Kd() respectively, the gross primary production P[Ed(400–700)] and P[Ed()] was computed. In the green-brown waters of the Eastern Scheldt estuary the use of neutral density filters was sufficient to simulate the underwater light conditions. In clear waters it can cause an overestimation of the gross production.     

Presence of anisotropic (birefringent) crystalline structures in embryonic and juvenile monogonont rotifers

A systematic survey for the presence of birefringent (anisotropic) structures in rotifers was undertaken. Several common features of rotifers exhibit anisotropism (e.g. trophi & muscles). However, unusual anisotropic crystalline structures (ACS) were found in late stage embryos (i.e. possessing eyespots and trophi, and showing movement). ACS were found in 18 of 26 species of monogonont rotifers (comprising 11 genera of 5 families). In Sinantherina socialis, ACS were present in the lower gut as compact, spherical masses of minute crystals that slowly broke apart and disappeared within 20 hours of hatching. Although several authors have described the existence of refractive bodies in rotifers, to my knowledge this is the first report of their birefringent properties.     

Use of membrane filters for selective isolation of actinomycetes from soil

Abstract A method using membrane filters of appropriate pore size, to selectively isolate actinomycetes from a mixed population of soil microorganisms, is described.
The method is based on the ability of actinomycetes to propagate and pass through the pores of filters while bacteria and fungi are retained on the membrane surface.     

Growth of animal cells on glass fiber filters and their utilization for biosynthetic analysis

Summary HeLa and L-M cells can be effectively grown directly on glass fiber filters to yield replicate cultures that allow easy analysis of biosynthetic capabilities through measurement of radioactive precursor uptake and incorporation. The glass fiber filters are superior to glass cover slips, growth in scintillation vials, and growth on Millipore filters in the ease of handling during experimental treatment and in the amount of radioactivity incorporated during the labeling period. These parameters are experimentally established and a typical application of the procedure that demonstrates the hydroxyurea inhibition of DNA synthesis is presented. This research was supported by Oklahoma Agricultural Experiment Station Project 1534. This publication is Article J-3334 of the Oklahoma Agricultural Experimental Station.     

A Generic Approach for Efficient Detection of Vascular Structures

Vascular segmentation is often required in medical image analysis for various imaging modalities. Despite the rich literature in the field, the proposed methods need most of the time adaptation to the particular investigation and may sometimes lack the desired accuracy in terms of true positive and false positive detection rate. This paper proposes a general method for vascular segmentation based on locally connected filtering applied in a multiresolution scheme. The filtering scheme performs progressive detection and removal of the vessels from the image relief at each resolution level, by combining directional 2D-3D locally connected filters (LCF). An important property of the LCF is that it preserves (positive contrasted) structures in the image if they are topologically connected with other similar structures in their local environment. Vessels, which appear as curvilinear structures, can be filtered out by an appropriate LCF set-up which will minimally affect sheet-like structures. The implementation in a multiresolution framework allows dealing with different vessel sizes. The outcome of the proposed approach is illustrated on several image modalities including lung, liver and coronary arteries. It is shown that besides preserving high accuracy in detecting small vessels, the proposed technique is less sensitive with respect to noise and the presence of pathologies of positive-contrast appearance on the images. The detection accuracy is compared with a previously developed approach on the 20 patient database from the VESSEL12 challenge.     

Differences between species in seed bank and vegetation helps to hold functional diversity in a floodable Neotropical savanna

种子库和植被物种之间的差异有助于保持新热带稀树草原的功能多样性 本研究的目的是量化种子库和建立的植被对物种组成、功能组成和多样性的贡献,并讨论这些差异对冲积平原植物群落更新和稳定性的影响。我们在巴西潘塔纳尔湿地的一个周期性洪水泛滥的稀树大草原上,在旱季和雨季对分布在5个地点的25个地块(10 m × 1 m)的1.5 m高度的地面覆盖植被和种子库进行了采样。采用出苗法对土壤种子库进行了评价。研究结果表明,种子库物种具有赋予群落更新的特征,而植被则具有稳定性特征。种子库的功能丰富度高于植被,而功能均匀度则低于植被。由于种子库和植被的植物特征不同,使得具有不同功能稳定性和更新特性的物种得以共存,这将有助于维持植物的功能多样性。这可能会让植物种群在应对干旱、火灾和洪水等不同的环境选择时更具有弹性。     

Culture And Staining of Pollen Grains of Ricinus communis

Germinating and growing pollen grains (male gametophytes) of Ricinus communis L. in liquid culture is achieved as follows: Pollen is collected over a 10-15 min period from mature anther clusters which have been removed from the male flowers and which have been kept at 25° C and 40-60% relative humidity. Samples weighing between 2.5 and 5.0 mg are brought as quickly as possible into a Desicote treated vial containing 17% sucrose and 30 ppm H₃BO₃ in boiled distilled water. The proportion (w/v) of pollen to culture solution should be 1:100. Shed pollen is kept in a humidity chamber whenever it is not being handled. The air in the culture vial is replaced by O₂ at the pressure of 1 atmosphere plus 5 lb and the sealed vials are shaken gently for 8-10 hr while partially immersed in a waterbath kept at 30° C. The pollen is fixed by the addition to the incubation suspension of an absolute alcohol-lactic acid (4:1) fixing fluid. The proportion used is 36 parts of fixing fluid to 1 part of culture solution. The fixed pollen can be stored in the fixative. Smears are prepared by applying single drops of the constantly agitated suspension of fixed pollen to a microscope slide. After each drop has spread out and dried, an additional drop is added until 10-20 have been applied. The preparations are stained by adding a drop of 1% acetic-orcein and are sealed with fingernail lacquer. The method is well adapted to the following types of studies: pollen germination, physiology of pollen tube growth, morphology of the male gametocyte, and physiology and cytology of the generative cell and nucleus.     

Detection of Architectural Distortion in Prior Mammograms via Analysis of Oriented Patterns

We demonstrate methods for the detection of architectural distortion in prior mammograms of interval-cancer cases based on analysis of the orientation of breast tissue patterns in mammograms. We hypothesize that architectural distortion modifies the normal orientation of breast tissue patterns in mammographic images before the formation of masses or tumors. In the initial steps of our methods, the oriented structures in a given mammogram are analyzed using Gabor filters and phase portraits to detect node-like sites of radiating or intersecting tissue patterns. Each detected site is then characterized using the node value, fractal dimension, and a measure of angular dispersion specifically designed to represent spiculating patterns associated with architectural distortion.Our methods were tested with a database of 106 prior mammograms of 56 interval-cancer cases and 52 mammograms of 13 normal cases using the features developed for the characterization of architectural distortion, pattern classification via quadratic discriminant analysis, and validation with the leave-one-patient out procedure. According to the results of free-response receiver operating characteristic analysis, our methods have demonstrated the capability to detect architectural distortion in prior mammograms, taken 15 months (on the average) before clinical diagnosis of breast cancer, with a sensitivity of 80% at about five false positives per patient.     

Impact of virus preparation quality on parvovirus filter performance

Virus‐removal filtration technology is commonly used in the manufacturing process for biologics to remove potential viral contaminants. Virus‐removal filters designed for retaining parvovirus, one of the smallest mammalian viruses, are considered an industry standard as they can effectively remove broad ranges of viruses. It has long been observed that the performance of virus filters can be influenced by virus preparations used in the laboratory scale studies (PDA, 2010 ). However, it remains unclear exactly what quality attributes of virus preparations are critical or indicative of virus filter performance as measured by effectiveness of virus removal and filter capacity consistency. In an attempt to better understand the relationship between virus preparation and virus filter performance, we have systematically prepared and analyzed different grades of parvovirus with different purity levels and compared their performance profiles on Viresolve® Pro parvovirus filters using four different molecules. Virus preparations used in the studies were characterized using various methods to measure DNA and protein content as well as the hydrodynamic diameter of virus particles. Our results indicate that the performance of Viresolve® Pro filters can be significantly impacted depending on the purity of the virus preparations used in the spike and recovery studies. More importantly, we have demonstrated that the purity of virus preparations is directly correlated to the measurable biochemical and biophysical properties of the virus preparations such as DNA and protein content and monodispersal status, thus making it possible to significantly improve the consistency and predictability of the virus filter performance during process step validations. Biotechnol. Bioeng. 2013; 110: 229–239. © 2012 Wiley Periodicals, Inc.