Tailoring microbes to upgrade lignin

Lignin depolymerization generates a mixture of numerous compounds that are difficult to separate cost-effectively. To address this heterogeneity issue, microbes have been employed to ‘biologically funnel’ a broad range of compounds present in depolymerized lignin into common central metabolites that can be converted into a single desirable product. Because the composition of depolymerized lignin varies significantly with the type of biomass and the depolymerization method, microbes should be selected and engineered by considering this compositional variation. An ideal microbe must efficiently metabolize all relevant lignin-derived compounds regardless of the compositional variation of feedstocks, but discovering or developing such a perfect microbe is very challenging. Instead, developing multiple tailored microbes to tolerate a given mixture of lignin-derived compounds and to convert most of these into a target product is more practical. This review summarizes recent progress toward the development of such microbes for lignin valorization and offers future directions.     

Life cycle assessment of forest biomass energy feedstock in the Northeast United States

Life cycle assessment (LCA) was combined with primary data from nine forest harvesting operations in New York, Maine, Massachusetts, and Vermont, from 2013 to 2019 where forest biomass (FB) for bioenergy was one of several products. The objective was to conduct a data‐driven study of greenhouse gas emissions associated with FB feedstock harvesting operations in the Northeast United States. Deterministic and stochastic LCA models were built to simulate the current FB bioenergy feedstock supply chain in the Northeast US with a cradle‐to‐gate scope (forest harvest through roadside loading) and a functional unit of 1.0 Mg of green FB feedstock at a 50% moisture content. Baseline LCA, sensitivity analysis, and uncertainty analyses were conducted for three different FB feedstock types—dirty chips, clean chips, and grindings—enabling an empirically driven investigation of differences between feedstock types, individual harvesting process contributions, and literature comparisons. The baseline LCA average impacts were lower for grindings (4.57 kg CO_2eq/Mg) and dirty chips (7.16 kg CO_2eq/Mg) than for clean chips (23.99 kg CO_2eq/Mg) under economic allocation, but impacts were of similar magnitude under mass allocation, ranging from 24.42 to 27.89 kg CO_2eq/Mg. Uncertainty analysis showed a wider range of probable results under mass allocation compared to economic allocation. Sensitivity analysis revealed the impact of variations in the production masses and total economic values of primary products of forest harvests on the LCA results due to allocation of supply chain emissions. The high variability in fuel use between logging contractors also had a distinct influence on LCA results. The results of this study can aid decision‐makers in energy policy and guide emissions reductions efforts while informing future LCAs that expand the system boundary to regional FB energy pathways, including electricity generation, transportation fuels, pellets for heat, and combined heat and power.     

Plant and soil effects on bacterial communities associated with Miscanthus × giganteus rhizosphere and rhizomes

Bacterial assemblages, especially diazotroph assemblages residing in the rhizomes and the rhizosphere soil of Miscanthus × giganteus, contribute to plant growth and nitrogen use efficiency. However, the composition of these microbial communities has not been adequately explored nor have the potential ecological drivers for these communities been sufficiently studied. This knowledge is needed for understanding and potentially improving M. × giganteus – microbe interactions, and further enhancing sustainability of M. × giganteus production. In this study, cultivated M. × giganteus from four sites in Illinois, Kentucky, Nebraska, and New Jersey were collected to examine the relative influences of soil conditions and plant compartments on assembly of the M. × giganteus‐associated microbiome. Automated ribosomal intergenic spacer (ARISA) and terminal restriction fragment length polymorphism (T‐RFLP) targeting the nifH gene were applied to examine the total bacterial communities and diazotroph assemblages that reside in the rhizomes and the rhizosphere. Distinct microbial assemblages were detected in the endophytic and rhizosphere compartments. Site soil conditions had strong correlation with both total bacterial and diazotroph assemblages, but in different ways. Nitrogen treatments showed no significant effect on the composition of diazotroph assemblages in most sites. Endophytic compartments of different M. × giganteus plants tended to harbor similar microbial communities across all sites, whereas the rhizosphere soil of different plant tended to harbor diverse microbial assemblages that were distinct among sites. These observations offer insight into better understanding of the associative interactions between M. × giganteus and diazotrophs, and how this relationship is influenced by agronomic and edaphic factors.     

Physical and biochemical characterization of a simple intermediate between fluidized and expanded bed contactors

Physical and biochemical comparison has been made of the performance of a simple fluidised bed contactor and a commercial expanded bed contactor, characterised by identical dimensions, and operated at various settled bed heights with two anion exchange adsorbents. The contactors were tested with various feedstocks comprising bovine albumin in the absence and presence of 20 g dry cell weight biomass litre^-1. Earlier classification of the simple contactor as a single-stage, well mixed fluidised bed is reviewed. The relative merits of STREAMLINE DEAE and DEAE Spherodex LS as fluidisable, anion exchange adsorbents are discussed.     

Soil nutrient budgets following projected corn stover harvest for biofuel production in the conterminous United States

Increasing demand for food and biofuel feedstocks may substantially affect soil nutrient budgets, especially in the United States where there is great potential for corn (Zea mays L) stover as a biofuel feedstock. This study was designed to evaluate impacts of projected stover harvest scenarios on budgets of soil nitrogen (N), phosphorus (P), and potassium (K) currently and in the future across the conterminous United States. The required and removed N, P, and K amounts under each scenario were estimated on the basis of both their average contents in grain and stover and from an empirical model. Our analyses indicate a small depletion of soil N (?4 ± 35 kg ha^?1) and K (?6 ± 36 kg ha^?1) and a moderate surplus of P (37 ± 21 kg ha^?1) currently on the national average, but with a noticeable variation from state to state. After harvesting both grain and projected stover, the deficits of soil N, P, and K were estimated at 114–127, 26–27, and 36–53 kg ha^?1 yr^?1, respectively, in 2006–2010; 131–173, 29–32, and 41–96 kg ha^?1 yr^?1, respectively, in 2020; and 161–207, 35–39, and 51–111 kg ha^?1 yr^?1, respectively, in 2050. This study indicates that the harvestable stover amount derived from the minimum stover requirement for maintaining soil organic carbon level scenarios under current fertilization rates can be sustainable for soil nutrient supply and corn production at present, but the deficit of P and K at the national scale would become larger in the future.     

The economics of producing sustainable aviation fuel: a regional case study in Queensland,Australia

The airline industry has a strong interest in developing sustainable aviation fuels, in order to reduce their exposure to increasing oil prices and cost liability for greenhouse gas emissions. The feasibility and cost of producing sustainable biomass‐based jet fuels at a sufficient scale to materially address these issues is an enormous challenge. This paper builds directly on the biophysical study by H.T. Murphy, D.A. O'Connell, R.J. Raison, A.C. Warden, T.H. Booth, A. Herr, A.L. Braid, D.F. Crawford, J.A. Hayward, T. Javonovic, J.G. McIvor, M.H. O'Connor, M.L. Poole, D. Prestwidge, N. Raisbeck‐Brown & L. Rye, In review, which examined a 25 year scale‐up strategy to produce 5% of projected jet fuel demand in Australia in 2020 (470 mL) in the Fitzroy region of Queensland, Australia. The strategy was based on the use of a mixed ligno‐cellulosic biomass feedstock and assumed, for the sake of exploring and quantifying the scenario, a simplified two‐step conversion process – conversion of biomass to crude bio‐oil within the region, and upgrade to jet fuel at a central Brisbane facility. This paper provides details on the costs of production in this scenario, focusing on two different strategies for biomass utilization, and two types of novel small–medium scale conversion technologies. The cost analyses have taken into account technology learning curves, different economies of scale and key cost sensitivities. The cost of biomass‐based jet fuels is estimated to be between 0.70 and 1.90 The airline industry has a strong interest in developing sustainable aviation fuels, in order to reduce their exposure to increasing oil prices and cost liability for greenhouse gas emissions. The feasibility and cost of producing sustainable biomass‐based jet fuels at a sufficient scale to materially address these issues is an enormous challenge. This paper builds directly on the biophysical study by H.T. Murphy, D.A. O'Connell, R.J. Raison, A.C. Warden, T.H. Booth, A. Herr, A.L. Braid, D.F. Crawford, J.A. Hayward, T. Javonovic, J.G. McIvor, M.H. O'Connor, M.L. Poole, D. Prestwidge, N. Raisbeck‐Brown & L. Rye, In review, which examined a 25 year scale‐up strategy to produce 5% of projected jet fuel demand in Australia in 2020 (470 mL) in the Fitzroy region of Queensland, Australia. The strategy was based on the use of a mixed ligno‐cellulosic biomass feedstock and assumed, for the sake of exploring and quantifying the scenario, a simplified two‐step conversion process – conversion of biomass to crude bio‐oil within the region, and upgrade to jet fuel at a central Brisbane facility. This paper provides details on the costs of production in this scenario, focusing on two different strategies for biomass utilization, and two types of novel small–medium scale conversion technologies. The cost analyses have taken into account technology learning curves, different economies of scale and key cost sensitivities. The cost of biomass‐based jet fuels is estimated to be between 0.70 and 1.90 $ L^?1 when the efficiency of conversion of biomass to biocrude and subsequently to aviation fuel is varied by ±10% of published values, with an average value of 1.10 $ L^?1. This is within the range of the projected 2035 conventional jet fuel price of 1.50 $ L^?1. Therefore, biomass‐based jet fuel has the potential to contribute to supply of Australia's jet fuel needs in the future.     

Biohydrogen production from lignocellulosic feedstock

Due to the recent energy crisis and rising concern over climate change, the development of clean alternative energy sources is of significant interest. Biohydrogen produced from cellulosic feedstock, such as second generation feedstock (lignocellulosic biomass) and third generation feedstock (carbohydrate-rich microalgae), is a promising candidate as a clean, CO₂-neutral, non-polluting and high efficiency energy carrier to meet the future needs. This article reviews state-of-the-art technology on lignocellulosic biohydrogen production in terms of feedstock pretreatment, saccharification strategy, and fermentation technology. Future developments of integrated biohydrogen processes leading to efficient waste reduction, low CO₂ emission and high overall hydrogen yield is discussed.     

Miscanthus × giganteus productivity: the effects of management in different environments

Miscanthus × giganteus is a C₄ perennial grass that shows great potential as a high‐yielding biomass crop. Scant research has been published that reports M. × giganteus growth and biomass yields in different environments in the United States. This study investigated the establishment success, plant growth, and dry biomass yield of M. × giganteus during its first three seasons at four locations (Urbana, IL; Lexington, KY; Mead, NE; Adelphia, NJ) in the United States. Three nitrogen rates (0, 60, and 120 kg ha^?1) were applied at each location each year. Good survival of M. × giganteus during its first winter was observed at KY, NE, and NJ (79–100%), and poor survival at IL (25%), due to late planting and cold winter temperatures. Site soil conditions, and growing‐season precipitation and temperature had the greatest impact on dry biomass yield between season 2 (2009) and season 3 (2010). Ideal 2010 weather conditions at NE resulted in significant yield increases (P < 0.0001) of 15.6–27.4 Mg ha^?1 from 2009 to 2010. Small yield increases in KY of 17.1 Mg ha^?1 in 2009 to 19.0 Mg ha^?1 in 2010 could be attributed to excessive spring rain and hot dry conditions late in the growing season. Average M. ×giganteus biomass yields in NJ decreased from 16.9 to 9.7 Mg ha^?1 between 2009 and 2010 and were related to hot dry weather, and poor soil conditions. Season 3 yields were positively correlated with end‐of‐season plant height () and tiller density (). Nitrogen fertilization had no significant effect on plant height, tiller density, or dry biomass yield at any of the sites during 2009 or 2010.     

Genetic Modification of Short Rotation Popular Wood: Properties for Ethanol Fuel and Fiber Productions

Opportunities for matching wood chemical and physical properties to manufacturing and product requirements via genetic modification have long been recognized. Exploitation is now feasible due to advances in trait measurement, breeding, genetic mapping and marker, and genetic transformation technologies. With respect to classic selection and breeding of short-rotation poplars, genetic parameters are favorable for decreasing lignin content and increasing specific gravity, but less so for increasing cellulose content. Knowledge of functional genomics is expanding, as is that needed for eventual application of marker-aided breeding, trait dissection, candidate gene identification, and gene isolation. Research on gene transfer has yielded transgenic poplars with decreased lignin and increased cellulose contents, but otherwise normal growth and development. Until effective marker-aided breeding technologies become available, the most promising approach for enhancing ethanol fuel and fiber production and processing efficiencies centers on selecting and breeding poplars for high wood substance yields and genetically transforming them for decreased lignin and increased cellulose contents.