Additives and Enzyme Stability

The polypeptide chain of an enzyme is folded so that the necessary functional groups are brought together in the active site. Conformational changes may disrupt this arrangement and cause loss of enzymic activity. The effect of soluble additives on the unfolding process is discussed. Additives may be classified as substrates and similar ligands, small uncharged organic molecules, specific and non-specific ionic species, and polymers.     

A New Electrolyte Formulation for Securing High Temperature Cycling and Storage Performances of Na‐Ion Batteries

The Na‐ion battery is recognized as a possible alternative to the Li‐ion battery for applications where power and cost override energy density performance. However, the increasing instability of their electrolyte with temperature is still problematic. Thus, a central question remains how to design Na‐based electrolytes. Here, the discovery of a Na‐based electrolyte formulation is reported which enlists four additives (vinylene carbonate, succinonitrile, 1,3‐propane sultone, and sodium difluoro(oxalate)borate) in proper quantities that synergistically combine their positive attributes to enable a stable solid electrolyte interphase at both negative and positive electrodes surface at 55 °C. Moreover, the role of each additive that consists in producing specific NaF coatings, thin elastomers, sulfate‐based deposits, and so on via combined impedance and X‐ray photoelectron spectroscopy is rationalized. It is demonstrated that empirical electrolyte design rules previously established for Li‐ion technology together with theoretical guidance is vital in the quest for better Na‐based electrolytes that can be extended to other chemistries. Overall, this finding, which is implemented to 18 650 cells, widens the route to the rapid development of the Na‐ion technology based on Na₃V₂(PO₄)₂F₃/C chemistry.     

Insights into protective effects of medium additives on animal cells under fluid stresses: the hydrophobic interactions

Animal cells in suspension culture can suffer severe mechanical damage from bursting gas bubbles or other hydrodynamic force sources. Certain chemical additives in the culture media, particularly some surface-active chemicals, can effectively protect animal cells against such damage. Previously we proposed that the protective effect is associated with the adsorption of the additives in the cell membrane through hydrophobic binding of the surface-active molecules to the membrane. Adsorption of the additives to the cell membrane may lead to decreased hydrophobicity of the cell surface, thus eliminating cell adhesion to bubbles and reducing cell damage from bursting bubbles. In this study, we measured the hydrophobicity of two insect cell lines based on cell adhesion to hydrocarbon phase and its influence by surface-active chemicals, Pluronic F68, a methylcellulose and a polyethylene glycol. The experimental results showed strong support for the aforecited cell protection mechanism.     

Determination of membrane potential with lipophilic cations: correction of probe binding

The binding of lipophilic ions to the membrane of envelope vesicles from Halobacterium halobium was examined in the absence and presence of membrane potential. The lipophilic ions used constitute a homologous series of (Phe)₃-P⁺-(CH₂)_n-CH₃ (n = 0–4) and tetraphenylphosphonium (TPP⁺). In the absence of membrane potential, the amounts of binding were proportional to the probe concentration in the medium when the concentration is dilute. Upon illumination, interior negative membrane potential is generated which induces the uptake of phosphonium cation probe. 2 μM were employed as the initial probe concentration. The real membrane potential was evaluated by means of extrapolation to the state of no binding: The values of for various probes are plotted against the binding coefficient. Here, C_i^app is the apparent intra-vesicular concentration of the probes which is calculated without consideration of bound probes. The ordinate intercept of the plot gives the true concentration ratio, and from this the membrane potential is evaluated. The membrane potential-dependent binding was analysed with a model: the membrane is split into two halves, outer and inner half, and the amounts of bound probes in each region are governed by the concentration in the contiguous solution. We obtained a formula which describes amounts of binding as a function of the membrane potential.     

Electrolysis-mediated irreversible inactivation of lipoxygenase directed toward electroaffinity labelling

Irreversible inhibition of soybean lipoxygenase-1 (SL-1) was accomplished via a controlled potential oxidative electrolysis of 1,5-dihydroxynaphthalene (1,5-DHN) at +0.8 V vs SCE. The inactivation of SL-1 with this known inhibitor was greatly enhanced under these electrolytic conditions to which the enzyme itself was stable. Electrolyses were run at 0 degree C in a 0.05 M phosphate buffer, pH 7.0, using graphite cloth electrodes. The rate of inactivation was observed to be limited by and dependent on the anodic oxidation of 1,5-DHN. The non-oxidizable (at this potential) inhibitor indomethacin was shown to protect the enzyme from irreversible inactivation, however, an external nucleophile (2-mercaptoethanol) had little effect. These initial studies support the capability of such electrochemical methods for the site-specific covalent modification (affinity labelling) of lipoxygenase, and perhaps other enzymes.     

A practical approach for quantitating specific mRNAs by solution hybridization

The preparation and use of a specific cDNA probe for quantitating mRNA by solution hybridization is described. Cloned DNA sequences are nick translated, denatured, hybridized to single-stranded M13 clones containing message strand (mDNA) sequences, and separated chromatographically on Bio-Gel A50 under first native and then denaturing conditions to yield a single-stranded cDNA probe. The details of a solution hybridization assay in which the single-stranded cDNA is used to quantitate mRNA in total nucleic acid samples are described. As little as 0.5 pg of mRNA can easily be detected within a day of sample isolation. Thus, the assay is both rapid and sensitive and can be used to measure RNAs complementary to any cloned DNA sequence. It is ideally suited to situations when accurate quantitation of multiple samples is anticipated.     

Characterization of inositol 1,4,5-trisphosphate-sensitive (IsCaP) and-insensitive (IisCaP) nonmitochondrial Ca2+ pools in rat pancreatic acinar cells

Summary We have measured Ca²⁺ uptake and Ca²⁺ release in isolated permeabilized pancreatic acinar cells and in isolated membrane vesicles of endoplasmic reticulum prepared from these cells. Ca²⁺ uptake into cells was monitored with a Ca²⁺ electrode, whereas Ca²⁺ uptake into membrane vesicles was measured with⁴⁵Ca²⁺. Using inhibitors of known action, such as the H⁺ ATPase inhibitors NBD-Cl and NEM, the Ca²⁺ ATPase inhibitor vanadate as well as the second messenger inositol 1,4,5-trisphosphate (IP₃) and its analog inositol 1,4,5-trisphosphorothioate (IPS₃), we could functionally differentiate two non-mitochondrial Ca²⁺ pools. Ca²⁺ uptake into the IP₃-sensitive Ca²⁺ pool (IsCaP) occurs by a MgATP-dependent Ca²⁺ uptake mechanism that exchanges Ca²⁺ for H⁺ ions. In the absence of ATP Ca²⁺ uptake can occur to some extent at the expense of an H⁺ gradient that is established by a vacuolar-type MgATP-dependent H⁺ pump present in the same organelle. The other Ca²⁺ pool takes up Ca²⁺ by a vanadate-sensitive Ca²⁺ ATPase and is insensitive to IP₃ (IisCaP). The IsCaP is filled at higher Ca²⁺ concentrations (10^–6 mol/liter) which may occur during stimulation. The low steady-state [Ca²⁺] of 10^–7 mol/liter is adjusted by the IisCaP.It is speculated that both Ca²⁺ pools can communicate with each other, the possible mechanism of which, however, is at present unknown.     

A non-invasive vibrating calcium-selective electrode measures acetylcholine-induced calcium flux across the sarcolemma of a smooth muscle

To determine possible sources of Ca²⁺ during excitation-contraction coupling in smooth muscle, a vibrating Ca²⁺-selective electrode was used to measure Ca²⁺ flux during the process of contraction. The smooth muscle model was the longitudinal muscle of the body wall of a sea cucumberSclerodactyla briareus. Because acetylcholine caused slow contractions of the muscle that were inhibited by Ca²⁺ channel blockers diltiazem and verapamil in earlier mechanical studies, we chose a vibrating Ca²⁺-selective electrode as our method to test the hypothesis that acetylcholine may be stimulating Ca²⁺ influx across the sarcolemma, providing a Ca²⁺ source during excitation-contraction coupling. Acetylcholine treatment stimulated a net Ca²⁺ efflux that was both dose and time dependent. We then tested two L-type Ca²⁺ channel blockers, diltiazem and verapamil, and two non-specific Ca²⁺ blockers, cobalt (Co²⁺) and lanthanum (La³⁺) on acetylcholine-induced Ca²⁺ flux. All four Ca²⁺ blockers tested potently inhibited Ca²⁺ efflux induced by physiological doses of acetylcholine. We propose that the acetylcholine-induced Ca²⁺ efflux was the result of, first, Ca²⁺ influx through voltage-sensitive L-type Ca²⁺ channels, then the rapid extrusion of Ca²⁺ by an outwardly directed carrier such as the Na–Ca exchanger as suggested by Li⁺ substitution experiments. The vibrating Ca²⁺ electrode has provided new insights on the active and complex role the sarcolemma plays in Ca²⁺ homeostasis and regulating Ca²⁺ redistribution during excitation-contraction coupling.Abbreviations ACh acetylcholine - E-C coupling excitation-contraction coupling - LMBW longitudinal muscle of the body wall     

细胞色素c在氨基酸及二肽修饰金电极上的电化学反应

系统地研究了细胞色素ｃ在多种氨基酸和多肽修饰电极上的电化学反应。并对影响加速细胞色素ｃ电化学反应的因素进行了讨论。     

Enzymatic Preparation of Mono- and Di-Stearin by Glycerolysis of Ethyl Stearate and Direct Esterification of Glycerol in the Presence of a Lipase from Candida Antarctica (Novozym 435)

Mixtures of 1(3)-monostearin and distearin were prepared by direct esterification of glycerol with stearic acid or transesterification using ethyl stearate as acyl donor in the presence of Candida antarctica lipase (Novozym 435) using a variety of solvents of differing polarity. In all cases, the transesterification resulted in higher product yields. In n-heptane as reaction medium the addition of water (3%) was essential for high product yields, with mono- and distearin being produced in almost equal amounts. Using more polar solvents as reaction media, such as acetonitrile or acetone, again the highest yields were obtained in the transesterification mode; employing these solvents the reactions were much more selective towards the formation of monostearin.