Operant supplementary heating in groups of growing pigs in relation to air velocity

The aim of the experiments was to investigate the effect of air velocity on the temperature preferred by growing pigs 12–14 weeks old. Pigs displayed a temperature preference by means of operant supplemental heating. They pushed a button connected to heating lamps. Six experiments of three weeks each and with two treatments with a group of 8 pigs each were made. Animals were housed in groups and weighed 14–20 kg at the start of the experiments. Air velocity was 0.08, 0.25 and 0.40 m/s. At each air velocity four replicates were made. Mean temperatures preferred were 17.9°C at 0.08 m/s, 20.5°C at 0.25 m/s and 21.7°C at 0.40 m/s. Within a day temperature preference fluctuated with 5.7 K at 0.08 m/s, 4.3 K at 0.25 m/s and 4.2 K at 0.4 m/s. Temperatures preferred were highest during day time.     

Evaluation of microwave hyperthermia applicators.

Hyperthermia has been used in conjunction with radiation and chemotherapy for cancer treatment. When using electromagnetic heating, applicators are critical components in contact with or in proximity to patients and can be the determining factor for effective and safe treatment. Tissue absorption of electromagnetic energy is determined by many factors. Three cases are shown to illustrate the complexity of microwave heating: 1) The BSD MA-151 applicator has good center heating on a muscle-only phantom as shown in the operation manual. When fat slabs of 0.25, 0.5, 1, and 2 cm thick were added, two hot spots near the periphery of the applicator were evident on all fat surfaces, exposed at 631 MHz. At 915 MHz, the heating was elongated on the surface of the models with 0.25- and 2-cm fat, and two hot spots were observed on the 0.5- and 1-cm fat surfaces. 2) Heating patterns of the Clini-Therm applicators on a muscle-only phantom, as indicated in the operations guide, are elliptical with their major axes perpendicular to the electric field. However, when a bolus is used, the elliptical pattern is parallel to the E field. 3) Heating patterns in cylindrical structures were studied with inhomogeneous models of limbs. Arm and thigh models consisting of fat, bone, and muscle material were heated with Clini-Therm L, M, and MS applicators at 915 MHz. In addition to the geometric effect, the results indicated that placing the applicators with E field parallel to the long axis of cylindrical structures can minimize required power, produce less heating of fats and reduce stray radiation. In conclusion, to apply penetrating microwave or other RF fields for tissue heating, one must simulate the clinical exposure conditions as closely as possible to obtain useful heating patterns.     

Physical conditions of propagation media and their influence on the rooting of cuttings

Summary The formation and subsequent growth of roots by cuttings of poinsettia, hydrangea, rose and azalea in various propagation media, Jiffy-7, Jiffy-9 and Grodan under different conditions of aeration was investigated. The interrelationships of the effects of air content of the media, temperature and light intensity on the rooting of poinsettia cuttings was also studied.With low air contents (0 cm moisture tension) in the propagation media the formation and growth of roots was strongly inhibited. The rooting performance of rose appeared to be less affected by the poor aeration. Increasing air content improved rooting but best results were obtained at moisture tensions of 4 to 8 cm. Rooting seems to be better correlated with oxygen diffusion rate (ODR) than with air content.For poinsettia cuttings the optimum temperature for rooting was 24 to 28°C. At low temperatures rooting was delayed while at higher temperatures it was almost completely inhibited. Callus formation increased with temperature but decreased with increasing moisture tension. Conditions which induced large callus formation inhibited root formation.High light intensity during rooting reduced overall rooting performance and the inhibition was most pronounced in conjunction with high moisture tensions.Report No. 255.     

Changes in heated and autoclaved forest soils of S.E. Australia. I. Carbon and nitrogen

The effect of heating and autoclaving on extractable nitrogen, N mineralisation and C metabolism was studied by heating five forest soils in the laboratory, simulating the range of effects of heat due to bushfire. Top soil (0–5 cm) was heated to 60 °C, 120 °C and 250 °C for 30 minutes; unheated soil was taken as a control. Samples of the soil heated to 250 °C were also inoculated with fresh soil to accelerate the recovery of the microbial population. Soil autoclaving was carried out as another heat treatment (moist heat). Soils were analysed immediately after heating and 3 times during seven months of incubation to assess immediate and longer-term effects of heating.Extractable N (organic and mineral forms) increased after heating to 120 °C, but decreased with further heating to 250 °C suggesting the volatilisation of N. N associated with microbial biomass diminished with heating and was barely detectable after the 250 °C treatment. Microbial biomass was an important source of soluble N in heated soils, and only partly recovered during subsequent long incubation. The amount of N mineralised during incubation depended on both soil and temperature. Nitrification did not occur when soils were heated to 250 °C (with or without inoculum), or after autoclaving, demonstrating the high sensitivity of nitrifiers to heat. At the beginning of soil incubation, respiration was enhanced in heated soils (250 °C, 250 °C inoculated) and autoclaved soils, but after 30 days of incubation respiration decreased to values either similar to or lower than those in control. This respiration pattern indicated that a fraction of labile C was released by heating, which was quickly mineralised within 30 days of incubation. These results demonstrate some effects of soil heating on C and N dynamics in forest soils.     

The protein composition of Friend cell nuclear matrix stabilized by various treatments. Different recovery of nucleolar proteins B23 and C23 and nuclear lamins

Summary— Using two-dimensional polyacrylamide gels stained with Coomassie blue we have studied the protein composition of the nuclear matrix obtained from mouse erythroleukemic nuclei kept at O°C throughout the isolation procedure to prepare the high ionic strength resistant fraction (control matrix) or stabilized in vitro or in vivo by different procedures prior to subfractionation (ie 37°C incubation of isolated nuclei; sodium tetrathionate exposure of purified nuclei; heat shock of intact cells). When the matrix obtained from 37°C incubated nuclei was compared with the control matrix, striking differences in the polypeptide pattern were seen if the protein was obtained in both cases from an equivalent number of nuclei. On the other hand, if the same amount of protein for both the samples was applied to the gels the differences were less evident. Sodium tetrathionate stabilization of isolated nuclei and heat shock of intact cells produced a matrix protein pattern that was very similar and differed from that of the in vitro heat-exposed matrix. Using specific polyclonal antisera, we demonstrate that nucleolar proteins B23/numatrin and C23/nucleolin were very abundant in the matrix obtained from chemically-treated nuclei or in vivo heat-stabilized nuclei but were recovered in very small amounts (B23) or completely absent (C23) in the matrix prepared from nuclei heated to 37°C in vitro. Differences were seen also in the recovery of nuclear lamins, and especially lamin B, that was poorly represented in the sodium tetrathionate-stabilized matrix. The results demonstrate that in mouse erythroleukemia cells the increased recovery of nuclear matrix protein that is seen after in vitro heating of isolated nuclei is predominantly due to an additional recovery of the same types of polypeptides that are detected also in the absence of such a treatment. The data also indicate that in vivo heat shock of intact cells produces a nuclear matrix protein pattern that is more similar to the pattern seen after stabilization of purified nuclei with sodium tetrathionate and differs significantly from that obtained by exposing nuclei to 37°C in vitro, unlike to that what previous reports have indicated.     

Effects of electroconductive heat treatment and electrical pretreatment on thermal death kinetics of selected microorganisms

Suspensions of yeast cell (zygo Saccharomyces bailii) in a phosphate buffer solution were subjected to conventional (hot water) and ohmic (electric current) heating under identical temperature histories. Experiments were also conducted with cells of Escherichia coli to compare the lethal effect of combination of sublethal electrical preteatment and conventional heating with conventional heating. The kinetic parameters (D,Z,K and E(a)) were determined for both organisms during different treatments. There was no significant difference in the death rate of yeast cells during conventional and ohmic heating at the voltage range used in this study. Results of electrical pretreatment and conventional heating on E. coli indicated differences under certain conditions when compared with pure conventional heating. Thus it is concluded that microbial death during ohmic heating was due primarily to thermal effects with no significant effect of electric current per se. Sublethal electrical pretreatment appears to offer potential for increased bacterial inactivation in certain cases.     

Temperature,hydrochemistry and plankton in Wicken Brickpits, 1930–1931

Temperature, selected chemical constituents and plankton were analysed from three depths, fortnightly, by day and occasionally by night, in two flooded brickpits, between May 1930 and August 1931.Br was 3.3 m deep, with clear water and little weed; III was only 1.8 m deep, with thick submerged weed, more sheltered than Br and becoming eutrophic. Neither had direct inflow nor outlet. Both conformed to the second order for dimictic lakes, with summer and winter stratification, leading, for varying periods, to stagnation marked by pH between 6.6 and 7.2 and O₂ much depleted or absent at the bottom.During stagnation, release of SiO₂, soluble inorganic phosphate-P, ammonium ions and bases from the bottom was shown by sampling water close to the mud. This finding preceded the definition of redox potential by others.Thermistor temperature measurements, used for the first time, showed comparable summer gradients in both ponds: on windy days these were usually sigmoid, with discontinuity at various depths, or else nearly isothermal; on calm days, they were exponential, when transmission of heat, from surface to bottom, was apparently due to radiation alone, without water circulation. Stability was then high.Diatoms were abundant in both ponds; but planktonic Rotifera and Crustacea differed in the two, apart fromDiaptomus gracilis, which was dominant in both.     

Quantification and analysis of reverse mutations at the hgprt locus in Chinese hamster ovary cells

We describe an assay for the quantification of reverse mutations at the hypoxanthine-guanine phosphoribosyltransferase (hgprt) locus in Chinese hamster ovary cells utilizing the selective agent L-azaserine (AS). Conditions are defined in terms of optimal AS concentration, cell density, and phenotypic expression time. After treatment, replicate cultures of 10⁶ cells are allowed a 48-h phenotypic expression time in 100-mm plates. AS (10 μM) is then added directly to the growing culture and AS-resistant (AS^r) cells form visible colonies. This assay is used to quantify ICR-191-, ICR-170-, and N-ethyl-N-nitrosourea-induced reversion of independently isolated HGPRT^? clones. The AS^r phenotype is characterized both physiologically and biochemically. All AS^r clones isolated are stably resistant to AS and aminopterin but sensitive to 6-thioguanine. They also have re-expressed HGPRT enzyme. In addition, several revertants are shown to contain altered HGPRT. The data provide further evidence that ICR-191 and ICR-170 cause structural gene mutations in mammalian cells and also suggest that ICR-191, ICR-170, and N-ethyl-N-nitrosourea induce similar types of mutations in Chinese hamster ovary cells.