Sequence heterogeneity and anomalous electrophoretic mobility of kinetoplast minicircle DNA from Leishmania tarentolae

Several unit-length minicircles from the kinetoplast DNA of Leishmania tarentolae were cloned into pBR322 and into M13 phage vectors. The complete nucleotide sequences of three different partially homologous minicircles were obtained. The molecules contained a region of approx. 80% sequence homology extending for 160–270 bp and a region unique to each minicircle. A 14-mer was found to be conserved in all kinetoplast minicircle sequences reported to date. The frequency distributions of various minicircle sequence classes in L. tarentolae were obtained by quantitative gel electrophoresis and by examination of the “T ladder” patterns of minicircles randomly cloned into M13 at several sites. By these methods we could assign approx. 50% of the total minicircle DNA into a minimum of five sequence classes. A sequence-dependent polyacrylamide gel migration abnormality was observed with several minicircle fragments both cloned and uncloned. The abnormality was dependent on the presence of a portion of the conserved region of the minicircle.     

Nucleotide sequence of the transposable element IS15

We have determined the complete nucleotide sequence of the right (R) copy of the insertion sequence IS15 which flanks, in direct orientation, the composite transposon Tn1525. IS15-R, which is capable of independent transposition, is 1648 bp long and has short (14 bp) perfect inverted repeats at its termini. Analysis of the nucleotide sequence indicates that IS15-R results from the transposition, in direct orientation, of a smaller (820 bp long) IS, designated IS15-Δ, into itself. This integration event is accompanied by the duplication of 8 bp in the target DNA. IS15-Δ possesses two large overlapping open reading frames (ORF) located on opposite strands. Because of this particular structure, IS15 possesses four large ORFs which, due to the integration event, exhibit some differences with those of the parental 1S15-Δ.     

Characteristics of the core protein of the aggregating proteoglycan from the Swarm rat chondrosarcoma

A ternary complex of hyaluronic acid-binding region and link protein bound to hyaluronic acid was isolated from limit clostripain digests of proteoglycan aggregates isolated from the Swarm rat chondrosarcoma. Under these conditions, the hyaluronic acid-binding region has a molecular weight of ? 65,000 (HA-BR₆₅). N-terminal amino acids in the complex were selectively ^l4C-carbamylated. The resulting derivatized HA-BR₆₅ was isolated, and tryptic peptide maps were prepared and developed on two-dimensional TLC sheets. A single, labeled peptide was obtained which gave a M_r by ? 8,000 by SDS-PAGE. Chymotrypsin digestion of the ternary complex reduced the molecular weight of HA-BR₆₅ to a polypeptide of ? 55,000 (HA-BR₅₅) which still retains the same N-terminal tryptic peptide. Partial digestion of proteoglycan aggregates with clostripain generated a series of larger intermediates with the hyaluronic acid-binding region. Direct SDS-PAGE analysis revealed one major intermediate with M_r ? 109,000 (HA-BR₁₀₉) as well as HA-BR₆₅. After chondroitinase digestion, two additional prominent intermediates were observed on a SDS-PAGE gel at M_r ? 120,000 (HA-BR₁₂₀) and ? 140,000 (HA-BR₁₄₀). All the intermediates were recognized by a monoclonal antibody specific for the hyaluronic acid-binding region, and all of them contained the same N-terminal tryptic peptide. The results indicate that the N terminus of the core protein is at the hyaluronic acid-binding end of the proteoglycan and that the chondroitin sulfate chains are first present on the core protein in a region between 109,000 and 120,000 molecular weight away from the N terminus.     

Nucleotide sequence of the Streptococcus faecalis plasmid gene encoding the 3'5"-aminoglycoside phosphotransferase type III

We have cloned in Escherichia coli and sequenced a 1489-bp DNA fragment conferring resistance to kanamycin and originating from the streptococcal plasmid pJH1. The resistance gene was located by analysis of the initiation and termination codons in an open reading frame (ORF) of 792 bp. The deduced gene product, a 3'5'-aminoglycoside phosphotransferase of type III, has an Mr of 29,200. Comparison of its amino acid sequence with those of type I (Oka et al., 1981) and type II (Beck et al., 1982) 3' phosphotransferase, from transposable elements Tn903 and Tn5, respectively, indicated a statistically significant structural relationship between these enzymes from phylogenetically remote bacterial genera. The degree of homology observed indicate that phosphotransferase type III and type I genes have diverged from a common ancestor and that the phosphotransferase type II gene has emerged more recently from the type I evolutionary pathway.     

Light-dependent conformational change at rhodopsin's cytoplasmic surface detected by increased susceptibility to proteolysis

Rhodopsin in bovine photoreceptor disk membranes was subjected to limited proteolysis by thermolysin, removing twelve amino acids from rhodopsin's carboxyl terminus. (1) The rate of proteolysis is significantly faster with rhodopsin following exposure to light than with unbleached rhodopsin, provided that the incubation conditions (pH, temperature) favor the formation of metarhodopsin II. (2) If the disk membranes are illuminated under conditions in which metarhodopsin I is the predominant photoproduct (pH 8.5, 0°C), no increase in the rate of proteolysis is observed compared to unilluminated membranes. (3) The light-induced increase in the rate of proteolysis is transient: it slowly decays in the dark to the original rate found for unbleached rhodopsin. The enhanced susceptibility to proteolysis appears to measure a conformational change at rhodopsin's cytoplasmic surface which is first exhibited at the metarhodopsin II stage. This and possibly other light-dependent changes may allow rhodopsin to mediate its signal as a light-receptor protein by binding to and activating certain rod cell enzymes.     

Construction of an M13 histidine-transducing phage: a single-stranded cloning vehicle with one EcoRI site.

In order to create a ready source of single-stranded DNA for DNA sequence determination by the dideoxy chain-termination method, the promoter-proximal part of the histidine operon, the hisOGD region of Salmonella typhimurium, was cloned onto the single-stranded phage M13. Both orientations of the his DNA were cloned to supply DNA template for sequencing of each strand. Insertion was achieved at an HaeIII site in the intergenic region (IR) of M13, and a single EcoRI site was purposely regenerated at one boundary of the his DNA insert. Infected colonies, not plaques, were selected using the hisD gene as a selective marker. The single RI site and the hisD marker for auxotrophic selection represent improvements on the wild type M13 as a single-stranded vector for cloning other DNA.     

Misannotations of the genes encoding sugar N‐formyltransferases

Tens of thousands of bacterial genome sequences are now known due to the development of rapid and inexpensive sequencing technologies. An important key in utilizing these vast amounts of data in a biologically meaningful way is to infer the function of the proteins encoded in the genomes via bioinformatics techniques. Whereas these approaches are absolutely critical to the annotation of gene function, there are still issues of misidentifications, which must be experimentally corrected. For example, many of the bacterial DNA sequences encoding sugar N‐formyltransferases have been annotated as l ‐methionyl‐tRNA transferases in the databases. These mistakes may be due in part to the fact that until recently the structures and functions of these enzymes were not well known. Herein we describe the misannotation of two genes, WP_088211966.1 and WP_096244125.1, from Shewanella spp. and Pseudomonas congelans, respectively. Although the proteins encoded by these genes were originally suggested to function as l ‐methionyl‐tRNA transferases, we demonstrate that they actually catalyze the conversion of dTDP‐4‐amino‐4,6‐dideoxy‐d ‐glucose to dTDP‐4‐formamido‐4,6‐dideoxy‐d ‐glucose utilizing N¹⁰‐formyltetrahydrofolate as the carbon source. For this analysis, the genes encoding these enzymes were cloned and the corresponding proteins purified. X‐ray structures of the two proteins were determined to high resolution and kinetic analyses were conducted. Both enzymes display classical Michaelis–Menten kinetics and adopt the characteristic three‐dimensional structural fold previously observed for other sugar N‐formyltransferases. The results presented herein will aid in the future annotation of these fascinating enzymes.     

The C-terminal tail extension of myosin 16 acts as a molten globule,including intrinsically disordered regions,and interacts with the N-terminal ankyrin

The lesser-known unconventional myosin 16 protein is essential in proper neuronal functioning and has been implicated in cell cycle regulation. Its longer Myo16b isoform contains a C-terminal tail extension (Myo16Tail), which has been shown to play a role in the neuronal phosphoinositide 3-kinase signaling pathway. Myo16Tail mediates the actin cytoskeleton remodeling, downregulates the actin dynamics at the postsynaptic site of dendritic spines, and is involved in the organization of the presynaptic axon terminals. However, the functional and structural features of this C-terminal tail extension are not well known. Here, we report the purification and biophysical characterization of the Myo16Tail by bioinformatics, fluorescence spectroscopy, and CD. Our results revealed that the Myo16Tail is functionally active and interacts with the N-terminal ankyrin domain of myosin 16, suggesting an intramolecular binding between the C and N termini of Myo16 as an autoregulatory mechanism involving backfolding of the motor domain. In addition, the Myo16Tail possesses high structural flexibility and a solvent-exposed hydrophobic core, indicating the largely unstructured, intrinsically disordered nature of this protein region. Some secondary structure elements were also observed, indicating that the Myo16Tail likely adopts a molten globule–like structure. These structural features imply that the Myo16Tail may function as a flexible display site particularly relevant in post-translational modifications, regulatory functions such as backfolding, and phosphoinositide 3-kinase signaling.