Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.     

Recognition of 29 kDa surface-associated adhesive molecule of Entamoeba histolytica by monoclonal antibodies

Abstract Monoclonal antibodies have been developed and used as specific probe to locate and identify a 29-kDa molecule of axenic Entamoeba histolytica trophozoites. Monoclonal antibody produced by clone C8 (MoAb C8) strongly agglutinated the amoebic trophozoites. THe immunofluorescence of live E. histolytica trophozoites and surface fluorescence of acetone-fixed trophozoites by MoAb C8 indicated existence of a 29-kDa molecule on surface-associated plasma membrane of E. histolytica . The monoclonal antibody belonged to IgG₁ isotype. The prior treatment of E. histolytica trophozoites with MoAb C8 resulted in significant ( P < 0.01) reduction in adherence of amoebic trophozoites to cultured Chinese Hamster Ovary cells and significant ( P < 0.01) reduction in cytotoxicity to cultured Baby Hamster Kidney cells. Pretreatment of amoebic trophozoites with MoAb C8 prior to cultivation in TPS-1 medium resulted in significant ( P < 0.01) reduction in growth of the parasite. Thus, the data suggested that the surface-exposed 29-kDa molecule may be one of the receptors involved in E. histolytica host cell interactions and may possibly modulate amoebic disease processes.     

Purification and characterization of lymphocytic clonal growth factor (LCGF) derived from human-human hybridoma SH-76 cells

Human-human hybridoma SH-76 cells were found to produce a factor that supported the growth of lymphocytic cells at low densities. The factor was purified from serum-free conditioned medium of the hybridoma cells by a successive application of ammonium sulfate precipitation, DEAE-Toyopearl, TSK G3000 SW and DEAE-5PW column chromatograph. The purified factor was a 72K single protein. The factor showed marked growth stimulating effect on lymphocytic cell lines, but had no effect on the growth of human adhesive cancer cell lines. Thus, the factor is a lymphocytic clonal growth factor (LCGF), as found previously in human plasma (Miyata, 1988). The LCGF of SH-76 cells could be produced in growth factor-free RPMI medium and purified easily from the conditioned medium. The factor is inactivated by heating at over 80°C, but is much more stable than the LCGF in human plasma.     

Association of age with class VI composite restoration

Dental caries is the major oral health problem in most of the countries, affecting 60-90% of school children and a vast majority of adults. Therefore, it is of interest to evaluate the association of age with Class VI defects restored with composite restorations. We used 102 cases with data regarding Class VI composite restorations in a datasheet of 86,000 records at Saveetha Dental College, India for this study. Data shows that Class VI restorations were commonly seen in upper anterior teeth in the age group of 51 and above. The cavities prepared to receive Class VI restoration followed a conservative design of caries removal and used direct restoration techniques for reconstruction of the lost tooth structure.     

Characterization of the protein fraction of the temporary adhesive secreted by the tube feet of the sea star Asterias rubens

Sea stars are able to make firm but temporary attachments to various substrata by secretions released by their tube feet. After tube foot detachment, the adhesive secretions remain on the substratum as a footprint. Proteins presumably play a key role in sea star adhesion, as evidenced by the removal of footprints from surfaces after a treatment with trypsin. However, until now, characterisation was hampered by their high insolubility. In this study, a non-hydrolytic method was used to render most of the proteins constituting the adhesive footprints soluble. After analysis by SDS-PAGE, the proteins separated into about 25 bands, which ranged from 25 to 450 kDa in apparent molecular weight. Using mass spectrometry and a homology-database search, it was shown that several of the proteins are known intracellular proteins, presumably resulting from contamination of footprint material with tube foot epidermal cells. However, 11 protein bands, comprising the most abundant proteins, were not identified and might correspond to novel adhesive proteins. They were named ‘Sea star footprint proteins’ (Sfps). Tandem mass spectrometry analysis of the protein bands yielded 43 de novo-generated peptide sequences. Most of them were shared by several, if not all, Sfps. Polyclonal antibodies were raised against one of the peptides (HEASGEYYR from Sfp-115) and were used in immunoblotting. They specifically labelled Sfp-115 and other bands with lower apparent molecular weights. The different results suggest that all Sfps might belong to a single family of related proteins sharing similar motifs or, alternatively, they are the products of polymerization and/or degradation processes.     

The byssus of the zebra mussel (Dreissena polymorpha): spatial variations in protein composition

The notorious biofouling organism Dreissena polymorpha (the zebra mussel) attaches to a variety of surfaces using a byssus, a series of protein threads that connect the animal to adhesive plaques secreted onto hard substrata. Here, the use of matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) to characterize the composition of different regions of the byssus is reported. All parts of the byssus show mass peaks corresponding to small proteins in the range of 3.7–7 kDa, with distinctive differences between different regions. Indeed, spectra from thread and plaques are almost completely non-overlapping. In addition, several peaks were identified that are unique to the interfacial region of the plaque, and therefore likely represent specialized adhesive proteins. These results indicate a high level of control over the distribution of proteins, presumably with different functions, in the byssus of this freshwater species.     

Response of Merkel cells in the palatal rugae to the continuous mechanical stimulation by palatal plate

The aim of the present study was to investigate the responses of Merkel cells that are numerous in the palatine rugae, due to the continuous mechanical stimulation exerted by the palatal plate. Forty golden hamsters were used in this experiment. The palatal plate was made of adhesive resin and it was set on the palate of the animal. To exert a continuous pressure, a 0.8?mm elevation on the internal surface of the palatal plate was created at the middle portion of the fourth palatine ruga. Thereafter, the number of Merkel cells in the mucosa was calculated by immunohistochemical observation. Morphological changes of Merkel cells were examined by electron microscopy. There was significant difference among the control and any of the treated groups on the number of CK20 positive Merkel cells (p?<?0.05) and that numbers were decreased at the sites where continuous mechanical stimulation was exerted. Degeneration of the cytoplasm mitochondria and nerve endings, and a decrease in both the number of neurosecretory granules and cytoplasmic processes were observed. Furthermore, the presence of nuclear chromatin aggregation and fragmentation was recognized. The continuous mechanical stimulation by the palatal plate affected the responses of Merkel cells and nerve endings, thus inducing a decrease in the number of Merkel cells. A portion of these changes was also associated with the expression of apoptosis.     

Spatial distribution of proteins in the quagga mussel adhesive apparatus

The invasive freshwater mollusc Dreissena bugensis (quagga mussel) sticks to underwater surfaces via a proteinacious ‘anchor’ (byssus), consisting of a series of threads linked to adhesive plaques. This adhesion results in the biofouling of crucial underwater industry infrastructure, yet little is known about the proteins responsible for the adhesion. Here the identification of byssal proteins extracted from freshly secreted byssal material is described. Several new byssal proteins were observed by gel electrophoresis. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was used to characterize proteins in different regions of the byssus, particularly those localized to the adhesive interface. Byssal plaques and threads contain in common a range of low molecular weight proteins, while several proteins with higher mass were observed only in the plaque. At the adhesive interface, a plaque-specific ~8.1 kDa protein had a relative increase in signal intensity compared to the bulk of the plaque, suggesting it may play a direct role in adhesion.     

VdSho1 Regulates Growth,Oxidant Adaptation and Virulence in Verticillium dahliae

Verticillium dahliae infection leads to Verticillium wilt in cotton and other dicotyledon crops. To reduce the loss of economic crops, more attention has been focused on the key genes involved in pathogenicity of this soil‐borne plant fungal pathogen. Sho1 encodes a conserved tetraspan transmembrane protein which is a key element of the two upstream branches of the HOG‐MAPK pathway in fungi. Sho1 is required for full virulence in a wide variety of pathogenic fungi. In this study, sho1 mutant in V. dahliae (designated ΔVdsho1) was generated by Agrobacterium tumefaciens‐mediated transformation. ΔVdsho1 strain was highly sensitive to menadione (at concentration of 120 μm ) and hydrogen peroxide (at concentration of 250 μm ), displayed delayed spore germination and reduced spore production compared with the wild type and the complemented strains. During infection of host cotton plants, ΔVdsho1 exhibited impaired ability of root attachment and invasive growth. Results from the present work suggest that VdSho1 controls external sensing, virulence and multiple growth‐related traits in V. dahliae and might serve as a potential target for control of Verticillium wilt.     

Influence of connection type on the biomechanical behavior of distal extension mandibular removable partial dentures supported by implants and natural teeth

Few studies are performed to evaluate the influence of connection type on the stress distribution of distal extension mandibular removable partial dentures (RPDs) supported by both implants and natural teeth. In this study, five three-dimensional finite element models were prepared to simulate mandibular bilateral partially edentulous arches. Four were RPDs supported by both implants and natural teeth, and the other one was RPDs supported only by natural teeth. The maximum equivalent (EQV) stress values of bone around implants, the abutments, and the mucosa displacements of the related supporting structures were measured. It was found that a non-rigid telescopic coping was more favorable to protect the implant than a rigid telescopic coping. Compared with other connection types, the easy resilient attachment (ERA) system seemed to be effective to associate implant without complications. However, the results obtained in the present study should be cautiously interpreted in the clinic.