Conformationally driven protease-catalyzed splicing of peptide segments: V8 protease-mediated synthesis of fragments derived from thermolysin and ribonuclease A.

We have studied the conformation as well as V8 protease-mediated synthesis of peptide fragments, namely amino acid residues 295-316 (TC-peptide) of thermolysin and residues 1-20 (S-peptide) of ribonuclease A, to examine whether "conformational trapping" of the product can facilitate reverse proteolysis. The circular dichroism study showed cosolvent-mediated cooperative helix formation in TC-peptide with attainment of about 30-35% helicity in the presence of 40% 1-propanol and 2-propanol solutions at pH 6 and 4 degrees C. The thermal melting profiles of TC-peptide in the above cosolvents were very similar. V8 protease catalyzed the synthesis of TC-peptide from a 1:1 mixture of the non-interacting complementary fragments (TC295-302 and TC303-316) in the presence of the above cosolvents at pH 6 and 4 degrees C. In contrast, V8 protease did not catalyze the ligation of S1-9 and S10-20, although S-peptide could assume helical conformation in the presence of the cosolvent used for the semisynthetic reaction. V8 protease was able to synthesize an analog of S-peptide (SA-peptide) in which residues 10-14 were substituted (RQHMD-->VAAAK). While S-peptide exhibited helical conformation in the presence of aqueous propanol solutions, SA-peptide displayed predominantly beta-sheet conformation. SA-peptide showed enhanced resistance to proteolysis as compared with S-peptide. Thus, failure of semisynthesis of S-peptide may be a consequence of high flexibility around the 9-10 peptide bond due to its proximity to the helix stop signal. The results suggest that protease-mediated ligations may be achieved by design and manipulation of the conformational aspects of the product.     

Synergistic effect of PEG-400 and cyclodextrin to enhance solubility of progesterone

Conclusion  PEG-400, polysorbate 80, and 2 CDs (Trappsol HPB and Captisol) were used in an attempt to improve the aqueous solubility of a model hydrophobic drug, progesterone. The aqueous solubility of progesterone improved significantly from 0.007 mg/mL by the addition of PEG-400, CDs, and polysorbate 80. In systems containing various amounts of PEG-400 and 3% Trappsol HPB in water (% wt/wt), the theoretical solubility was calculated by adding the solubilities in the individual systems. The observed solubility values were up to 96% higher than the theoretical values. The effect of synergism was significant in 5% to 50% PEG-400/water systems containing Trappsol HPB. Systems containing Captisol did not show such synergistic effects. In general, the addition of polysorbate 80 to the PEG-400/water systems containing CDs affected synergism negatively.     

Structural and dynamic properties of cytochrome P450 BM-3 in pure water and in a dimethylsulfoxide/water mixture

Solvent molecules play an important role for the structural and dynamical properties of proteins. A major focus of current protein engineering is the development of enzymes that are catalytically active in the presence of organic solvents. The monooxygenase P450 BM-3 is one of the best-studied enzymes and promising for industrial applications but with limited activity in the presence of organic solvents or cosolvents. To gain insights into the structural and dynamical properties of the heme domain of this enzyme in solution, molecular dynamics simulations in pure water and in a 14% DMSO/water mixture were performed. The results of the simulations show overall similar structural fluctuations in both solvent systems, with no indication of partial or global unfolding. In 14% DMSO, the regions comprising the helices E, F, and the EF loop (implicated in controlling the entry to the active site channel) undergo a large shift. Significant changes were also observed near the active site access channel at the residue R47. During the simulation, no DMSO molecule penetrated the active site. However, a significant accumulation of DMSO molecules close to the substrate-binding site and to the Flavin Mononucleotide (FMN) reductase domain interface was observed.     

Solubility Improvement of Drugs using N-Methyl Pyrrolidone

The solubilization efficiency of N-methyl pyrrolidone (NMP) has been determined and compared to that of ethanol and propylene glycol for 13 poorly soluble drugs. NMP is found to be a more efficient solubilizer for all the drugs studied. The solubility enhancement as high as about 800-fold is obtained in 20% v/v NMP solution as compared to water. The mechanism of drug solubilization by NMP has also been investigated. It is proposed that NMP enhances drug solubility by simultaneously acting as a cosolvent and a complexing agent. A mathematical model is used to estimate the drug solubility in NMP–water mixture, according to which the total solubility enhancement is a sum of the two effects. This model describes the experimental data well and is more accurate than other models. A large and uniform reduction in the surface tension of water as a function of NMP concentration demonstrates its cosolvent effect. The complexation is supported by the fact that it’s strength is affected by the temperature and the polarity of the medium. A strong correlation exists between log K _ow of the drugs and the cosolvency coefficients. The correlation between log K _ow and the complexation coefficients is weak suggesting that factors such as molecular shape and aromaticity of the drug molecule are significant in determining the complexation strength. This has been confirmed by the absence of a significant complexation between NMP and linear drug-like solutes.     

Corecovery of lipids and fermentable sugars from Rhodosporidium toruloides using ionic liquid cosolvents: Application of recycle to batch fermentation

This work evaluates the ability of an ionic liquid‐methanol cosolvent system to extract lipids and recycle fermentable sugars recovered from oil‐bearing Rhodosporidium toruloides grown in batch culture on defined media using glucose and xylose as carbon sources. Growth on the recycled mixed carbon substrate was successful with glucose consumed before xylose and overall cell mass to lipid yields (Y_P/X) between 57% and 61% (w/w relative to whole dried cell mass) achieved. Enzymatic hydrolysis of the delipified carbohydrate fraction recovered approximately 9%–11% (w/w) of the whole dried cell mass as fermentable sugars, which were successfully recycled as carbon sources without further purification. In total, up to 70% (w/w) of the whole dried cell mass was recovered as lipids and fermentable sugars and the substrate to lipid yields (Y_P/S) was increased from 0.12 to 0.16 g lipid/g carbohydrate consumed, highlighting the promise of this approach to process lipid bearing cell biomass. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1239–1242, 2014     

Effect of hexafluoroisopropanol alcohol on the structure of melittin: a molecular dynamics simulation study

The molecular mechanism by which HFIP stabilizes the alpha-helical structure of peptides is not well understood. In the present study, we use melittin as a model to gain insight into the details of the atomistic interactions of HFIP with the peptide. We have performed extensive comparative molecular dynamics simulations (up to 100 nsec) in the absence and in the presence of HFIP. In agreement with recent NMR experiments, the simulations show rapid loss of tertiary structure in water at pH 2 but much higher helicity in 35% HFIP. The MD simulations also indicate that melittin adopts a highly dynamic global structure in 35% HFIP solution with two alpha-helical segments sampling a wide range of angular orientations. The analysis of the HFIP distribution shows the tendency of HFIP to aggregate around the peptide, increasing the local cosolvent concentration to more than two times that in the bulk concentration. The correlation of local peptide structure with HFIP coating suggests that displacement of water at the peptide surface is the main contribution of HFIP in stabilizing the secondary structure of melittin. Finally, a stabilizing effect promoted by the presence of counter-ions was also observed in the simulations.     

Influence of ionic liquid cosolvent on transgalactosylation reactions catalyzed by thermostable beta-glycosylhydrolase CelB from Pyrococcus Furiosus

The synthesis of glycosides by enzymatic transglycosylation is a kinetically controlled reaction performed in the context of a non-favorable thermodynamic equilibrium. An unreactive organic cosolvent which increases the selectivity of the enzyme for glycosyl transfer to the acceptor nucleophile compared with water (Ksel) could improve maximum product yield. Here we report on the effect of the ionic liquid 1,3-dimethylimidazoliummethylsulfate on hydrolase and transferase activities of the hyperthermostable beta-glycosidase CelB from the archaeon Pyrococcus furiosus. CelB retained full catalytic efficiency for lactose hydrolysis at 80 degrees C in a 50% (by vol.) solution of ionic liquid in sodium citrate buffer, pH 5.5. It was inactive but not irreversibly denatured at 70% ionic liquid. Using lactose (0.15 M) as galactosyl donor, values of Ksel for a representative series of eight acceptor alcohols were determined in kinetic assays at 80 degrees C and found to increase between 1.3-fold (D-xylose) and 3.1-fold (glycerol) in 45% ionic liquid. Enhancement of Ksel was dependent on ionic liquid concentration and higher than expected from the decrease in water activity caused by the cosolvent. Experimental molar ratios of D-glucose and D-galactose produced during enzymatic conversion of lactose (75-150 mM) in the presence of D-xylose (0.5 M) or glycerol (0.5 M) showed excellent agreement with predictions based on Ksel values and confirm a significant, yet moderate effect of 45% ionic liquid on increasing the yield of D-galactoside product, by < or = 10%.     

Effect of organic cosolvent on kinetic resolution of tert-leucine by penicillin G acylase from Kluyvera citrophila

Penicillin G acylase (PGA) from Kluyvera citrophila immobilized on Amberzyml was used for enantioselective hydrolysis of N-phenylacetylated-dl-tert-leucine (N-Phac-dl-Tle) to produce l-tert-leucine (l-Tle). The effects of various organic cosolvents on hydrolysis of N-Phac-dl-Tle have been investigated in aqueous-cosolvent medium. It was founded that the rate of PGA-catalyzed reaction was significantly affected by the presence of 2% (v/v) organic cosolvent concentration. The initial rate fell with increasing logP of the cosolvent, but for logP values less than −0.24 the rate was faster than in purely aqueous medium. Additionally, the relative rate increases with the increase of dielectric constant (ε) of organic cosolvents. The yields of l-Tle in all aqueous-cosolvent systems were above 95% with the enantiomeric excess (ee) of >99%.     

Cosolvent-assisted oxidative folding of a bicyclic alpha-conotoxin ImI.

alpha-Conotoxin ImI is a 12-amino acid peptide, found in the venom of the marine snail Conus imperialis. This conotoxin is a selective antagonist of alpha7 nicotinic acetylcholine receptors. To produce biologically active alpha-ImI, disulfide bonds must be formed between Cys2-Cys8 and Cys3-Cys12. Oxidative folding of bicyclic conotoxins, such as alpha-ImI, has been traditionally achieved using two-step oxidation protocols with orthogonal protection on two native pairs of cysteines. In this work, two alternative oxidation protocols were explored: (1) the recently described one-pot oxidation of t-butyl/4-methylbenzyl protected Cys pairs and (2) direct oxidative folding. In contrast to the first method, the latter one resulted in high yields of correctly folded alpha-ImI. The addition of organic cosolvents, such as methanol, ethanol or isopropanol into the folding mixture significantly increased the accumulation of the native peptide. This effect was also observed for another conotoxin, alpha-PnIA. It is suggested that cosolvent-assisted direct oxidation might be of general use for other bicyclic alpha-conotoxins, but efficiency should be assessed on a case-by-case basis.     

Product-conformation-driven ligation of peptides by V8 protease

Organic co-solvent-induced secondary conformation of alpha(17-40) of human hemoglobin facilitates the splicing of E30-R31 in a mixture of its complementary segments by V8 protease. The amino acid sequence of alpha(17-40) has been conceptualized by the general structure FR(I)-EALER-FR(II) and the pentapeptide sequence EALER playing a major role in inducing the alpha-helical conformation. The primary structure of alpha(17-40) has been engineered in multiple ways to perturb one, two, or all three regions and the influence of the organic co-solvent-induced conformation and the concomitant resistance of E30-R31 peptide bond to V8 protease digestion has been investigated. The central pentapeptide (EALER), referred to here as splicedon,(3) appears to dictate a primary role in facilitating the splicing reaction. When the same flanking regions are used, (1) splicedons that carry amino acid residues of low alpha-helical potential, for example G at position 2 or 3 of the splicedon, generate a conformational trap of very low thermodynamic stability, giving an equilibrium yield of only 3%-5%; (2) splicedons with amino acid residues of good alpha-helical potential generate a conformational trap of medium thermodynamic stability and give an equilibrium yield of 20%-25%; (3) the splicedons with amino residues of good alpha-helical potential and also an amino acid that can generate an i, i + 4 side-chain carboxylate-guanidino (amino) interaction, a conformational trap of maximum thermodynamic stability is generated, giving an equilibrium yield of 45%-50%; and (4) the thermodynamic stability of the conformational trap of the spliced peptide is also influenced by the amino acid composition of the flanking regions. The V8 protease resistance of the spliced peptide bond is not a direct correlate of the amount of alpha-helical conformation induced into the product. The results of this study reflect the unique role of the splicedon in translating the organic co-solvent-induced product conformation as a site-specific stabilization of the spliced peptide bond. It is speculated that the splicedon with higher alpha-helical potential as compared to either one of the flanking regions achieves this by integrating its potential with that of the flanking region(s). Exchange of flanking regions with the products of other V8 protease-catalyzed splicing reactions will help to establish the general primary structural requirements of this class of splicing reactions and facilitate their application in modular construction of proteins.