Adsorption of DNA by Bacteria and Their Composites with Minerals

Previous studies revealed the thermodynamic properties of DNA adsorption on pure minerals or biomasses; however, there has been little attempt to develop such studies on bacteria–mineral composites. Equilibrium adsorption experiments, attenuated total reflectance Fourier transform infrared spectroscopy, and isothermal titration calorimetry were employed to investigate the adsorption of DNA by Bacillus subtilis, Pseudomonas putida, and their composites with minerals. Similar capacity and affinity were observed for DNA adsorption on two bacterial cells. However, different patterns were found in the adsorption of DNA by bacteria–mineral composites. The Gram-positive bacterium B. subtilis enhanced the adsorption of DNA on its mineral composites compared with their individual components, while the composites of Gram-negative bacterial cells with kaolinite and goethite bound lower amounts of DNA than the predicted values. The thermodynamic parameters and the Fourier transform infrared spectra showed that van der Waals force and hydrogen bonding are responsible for the DNA adsorption on B. subtilis–minerals and P. putida–kaolinite. By contrast, the entropy increases of excluded water rearrangement and dehydration effect play key roles in the interaction between DNA and P. putida–montmorillonite/goethite composites.     

Thiols and pancreatic beta-cell function: a review

In pancreatic islets insulin secretion in response to a variety of stimulators is sensitive to the redox state of extracellular and intracellular thiols. In this connection variations of plasma glutathione (GSH) may also be of importance. In the process of stimulus-secretion coupling, membrane thiols play an important role. One major localization of critical thiols appears to be related to the influx of calcium through the voltage-dependent channel. Other transmembranal ion movements and the cAMP system seem to be less sensitive to thiol oxidation than calcium influx via voltage-dependent Ca channels.     

Production of fuel alcohol from oats by fermentation

Very high gravity (>30 g dissolved solids per 100 ml) mashes were prepared from hulled and hulless oats and fermented at 20° C with active dry yeast to produce ethanol. Excessive viscosity development during mashing was prevented by hydrolyzing -glucan with crude preparations of -glucanase or Biocellulase. Both these preparations possessed endo--glucanase activity. By using these enzymes and by decreasing the water to grain ratio, very high gravity mashes with low viscosity were prepared. Unlike wheat and barley mashes, oat mashes contained sufficient amounts of assimilable nitrogen to promote a fast rate of fermentation. The free amino nitrogen (FAN) content of oat mash could be predicted by the equation, mg FAN L^–1=8.9n wheren is the number of grams of dissolved solids in 100 ml of mash supernatant fluid. Ethanol yields of 353.2±3.7 L and 317.6±1.3 L were obtained per tonne (dry weight basis) of hulless (59.8% starch) and hulled (50.8% starch) oats respectively. The efficiency of conversion of starch to ethanol was the same in normal and very high gravity mashes.     

Sampling dust from human dwellings to estimate the prevalence ofDermatophagoides mite and cat allergens

Summary Quantification of specific allergens in household dust samples may provide important information for selecting appropriate allergen control methods, and monitoring efficacy and compliance. The purpose of this study was to investigate the source of variation in mite and cat allergen measurements associated with dust sample collection. Discrete and composite dust samples were collected on a filter using a special vacuum sampling device. Aqueous extracts of the dust samples were prepared thenDer p I,Der f I, andFel d I were quantitated by enzyme immunoassays (EIA). Mite and cat allergens were frequently detected in dust samples from human dwellings, and the amounts of these allergens varied significantly (p<0.01) among dwellings. The differences of allergen measurements among duplicate samples taken immediately and up to three weeks later appear to be much smaller than differences among houses and between rooms. Variation among dust samples taken from living rooms and bedrooms of the same dwelling suggest differences in allergen reservoirs. Composite samples formed by sampling specific objects within a room may provide a reliable estimate of allergen exposure in that room. Dust samples from discrete objects are useful to find and monitor specific reservoirs of mite and cat allergens.     

Evaluation of health risks from a buried mass of diesel fuel before and after bioremediation

Plans are being formulated for in situ bioremediation of a subsurface plume of diesel fuel No. 2 that resulted from an accidental fuel release. Raoult's law and the aqueous solubilities of the toxic components were used to estimate organic contaminant concentrations in leachate from the untreated fuel mass. Carcinogenic risks and noncarcinogenic hazard indices were calculated for undiluted leachate. An 80% decrease in hydrocarbon mass and increases in the average molecular weights of the component fractions were assumed to result from the treatment. Sample calculations are provided to show how to evaluate results of analyses for petroleum hydrocarbons after bioremediation.     

Marginal proportional hazards models for clustered interval-censored data with time-dependent covariates

The Botswana Combination Prevention Project was a cluster-randomized HIV prevention trial whose follow-up period coincided with Botswana's national adoption of a universal test and treat strategy for HIV management. Of interest is whether, and to what extent, this change in policy modified the preventative effects of the study intervention. To address such questions, we adopt a stratified proportional hazards model for clustered interval-censored data with time-dependent covariates and develop a composite expectation maximization algorithm that facilitates estimation of model parameters without placing parametric assumptions on either the baseline hazard functions or the within-cluster dependence structure. We show that the resulting estimators for the regression parameters are consistent and asymptotically normal. We also propose and provide theoretical justification for the use of the profile composite likelihood function to construct a robust sandwich estimator for the variance. We characterize the finite-sample performance and robustness of these estimators through extensive simulation studies. Finally, we conclude by applying this stratified proportional hazards model to a re-analysis of the Botswana Combination Prevention Project, with the national adoption of a universal test and treat strategy now modeled as a time-dependent covariate.     

Environmental conditions during glycerol bioconversion affect 3-hydroxypropionic acid bioproduction by Limosilactobacillus reuteri DSM 17938

3-Hydroxypropionic acid (3-HP) is a platform molecule whose biological production was carried out by the bacterium Limosilactobacillus reuteri according to a two-step process: first, a growth phase in batch mode on glucose, then a glycerol bioconversion into 3-HP in fed-batch mode. With the objective of improving 3-HP bioproduction, this study aimed at defining the operating conditions during the bioconversion phase that increases the bioproduction performance. A central composite rotatable design allowed testing various pH levels and specific glycerol feeding rates. By establishing response surfaces, optimal conditions have been identified that were different depending on the considered output variable (final 3-HP quantity, 3-HP production yield and production rate). Of them, 3-HP final quantity and 3-HP production yield were maximized at pH 6.0 and at specific glycerol feeding rates of 60 and 55 mg_gly g_CDW⁻¹ h⁻¹, respectively. The specific 3-HP production rate was the highest at the upper limit of the specific substrate feeding rate (80 mg_gly g_CDW⁻¹ h⁻¹) but was not affected by the pH. An additional experiment was carried out at pH 6.0 and a specific glycerol feeding rate of 80 mg_gly g_CDW⁻¹ h⁻¹ to validate the previous observations. In conclusion, the results showed a significant improvement of 3-HP concentration by 13%, of specific production rate by 34% and of 3-HP volumetric productivity by 39%, as compared to the initial values.     

适用于获取最优化配方的一种算法

本文应用印楝种仁提取物（F3）与敌敌畏混配为例,以斜纹夜蛾（Spodopteralitura）为目标害虫,介绍一种适用于获取最优化配方的算法,在二次通用回归旋转组合设计的基础上,经参数辨识,获取二次回归方程,经失拟性、回归显著性检验,本方程基本能够反映杀虫剂用量与斜纹夜蛾幼虫死亡机率值之间的关系．在害虫防治实践中,要求在防治费用最小的基础上,目标害虫有最大的死亡率.因此,以防治目标害虫的费用作为优化算法的目标函数,以害虫死亡机率值最大作为约束条件,有如下的一组优化算式为目标函数约束条件式中a1,a2分别为参试杀虫剂1,2最低用量,b1,b2则为相应的最高用量．C1,C2分别为杀虫剂1,2的单价,N1,N2为杀虫剂l,2的用量．Y为目标害虫死亡机率值回归方程．本文所依据的试验设计中,以对数函数关系变换编码值与使用浓度之间的关系,所以应用拉格朗日求极值原理求取最优化配方．由计算所得的混配比例与其他方法所获结果一致．     

A Novel Electrochemically Active and Fe(III)-reducing Bacterium Phylogenetically Related to Clostridium butyricum Isolated from a Microbial Fuel Cell

An obligatory anaerobic bacterium was isolated from a mediator-less microbial fuel cell using starch processing wastewater as the fuel and designated as EG3. The isolate was Gram-positive, motile and rod (2.8–3.0 μm long, 0.5–0.6 μm wide). The partial 16S rRNA gene sequence and analysis of the cellular fatty acids profile suggested that EG3 clusters with Clostridium sub-phylum and exhibited the highest similarity (98%) with Clostridium butyricum. The temperature and pH optimum for growth were 37°C and 7.0, respectively. The major products of glucose and glucose/Fe(O)OH metabolism were lactate, formate, butyrate, acetate, CO₂and H₂. Growth was faster at the initial phase and the cell yield was higher when the medium was supplemented with Fe(O)OH than without Fe(O)OH. These results suggest that Fe(III) ion is utilised as an electron sink. Cyclic voltammetry showed that Clostridium butyricum EG3 cells were electrochemically active. It is a novel characteristic of strict anaerobic Gram-positive bacteria.     

The effect of internal capacitance on power quality and energy efficiency in a tubular microbial fuel cell

The pseudo-capacitive behaviour of a high surface area carbon veil electrode in a tubular microbial fuel cell (MFC) was investigated as a mechanism to enhance power quality and energy efficiency. Accumulated charge and energy from the anodic biofilm after prolonged open circuit times (1–120 min) were compared against equivalent periods of steady state loading (R = 100–3000 Ω). A significant difference in the amount of accumulated charge with different loads was observed, resulting in 1.051 C (R = 100 Ω) compared to 0.006 C (R = 3 kΩ). The automated application of short open and closed circuit (0.5–10 s) cycles resulted in an increase of power/current production (closed circuit alone), but presented lower efficiency considering entire open and closed period. The cumulative charge on the carbon veil electrode with biofilm was 39,807 C m⁻² at 100 Ω. Electrochemical Impedance Spectroscopy (EIS) showed that the Helmholtz layer presented a double layer capacitance of more than ten times the biofilm on electrode. The results indicate that the capacitive behaviour could be utilized to increase the power quality, i.e. its availability/applicability with respect to the operation of low power consuming devices.