Studies of biosorption of Pb2+, Cd2+ and Cu2+ from aqueous solutions using Adansonia digitata root powders

The potentials of Adansonia digitata root powders (ADRP) for adsorption of Pb²⁺, Cd²⁺ and Cu²⁺ from aqueous solutions was investigated. Physico-chemical analysis of the adsorbent (ADRP) shows that hydroxyl, carbonyl and amino groups were predominant on the surface of the adsorbent. Scanning Electron Microscope (SEM) image revealed its high porosity and irregular pores in the adsorbent while the Energy Dispersive X-ray Spectrum showed the major element with 53.0% Nitrogen, 23.8% carbon, 9.1% calcium, 7.5% potassium and 6.6% magnesium present. The found optimal conditions were: initial concentration of the metal ions = 0.5 mg/L, pH = 5, contact time = 90 min, adsorbent dose = 0.4 g and particle size = 32 µm. Freundlich isotherm showed good fit for the adsorption of Pb²⁺, Cd²⁺ and Cu²⁺. Dubinin-Radushkevich isotherm revealed that the adsorption processes were physisorption Cd(II) and Cu(II) but chemisorption with respect to Pb(II) ions. The kinetics and thermodynamic studies showed that Pseudo-second order and chemisorptions provided the best fit to the experimental data of Pb (II) ions only. Batch desorption result show that desorption in the acidic media for the metal ions were more rapid and over 90% of the metal ions were recovered from the biomass.     

Prospective theoretical and experimental study towards electrochemically grafted poly(N-vinyl-2-pyrrolidone) films on metallic surfaces

Quantum chemistry calculations of equilibrium geometry, atomic charges, dipole moment, and frontier orbital energies are carried out on model N-vinyl-2-pyrrolidone, its radical anion and cation, and three protonated derivatives. Attempts to obtain poly(N-vinyl-2-pyrrolidone) films grafted on nickel and platinum electrodes, respectively by cathodic and anodic polarizations, are reported. A thin, covering and insulating film is obtained on the Pt anode, as indicated by surface characterizations carried out with UPS and IRRAS spectroscopies. The fact that the film remains adherent to the metallic surface in spite of a permanent contact with an acetonitrile solution in which poly(N-vinyl-2-pyrrolidone) is soluble suggests that chemisorption has indeed been achieved.     

A Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density

A comprehensive approach is reported to construct stable and high volumetric energy density lithium–sulfur batteries, by coupling a multifunctional and hierarchically structured sulfur composite with an in‐situ cross‐linked binder. Through a combination of first‐principles calculations and experimental studies, it is demonstrated that a hybrid sulfur host composed by alternately stacking graphene and layered graphitic carbon nitride embraces high electronic conductivity as well as high polysulfide adsorptivity. It is further shown that the cross‐linked elastomeric binder empowers the hierarchical sulfur composites—multi‐microns in size—with the ability to form crack‐free and compact high‐loading electrodes using traditional slurry processing. Using this approach, electrodes with up to 14.9 mg cm^?2 sulfur loading and an extremely low electrolyte/sulfur ratio as low as 3.5: 1 µL mg^?1 are obtained. This study sheds light on the essential role of multifaceted cathode design and further on the challenges facing lithium metal anodes in building high volumetric energy density lithium–sulfur batteries.     

Interface interactions between insecticide carbofuran and tea waste biochars produced at different pyrolysis temperatures

Biochars showed a potential as adsorbents for organic contaminants, however, have not been tested for carbofuran, which has been detected frequently in water. This study provides evidences for the use of infused tea residue derived biochar for carbofuran removal. Biochars were produced at 300, 500 and 700 °C by slow pyrolysis and were characterized by proximate and ultimate analysis, FT-IR, SEM, BET and pore size distribution. Pyrolysis temperature showed a pronounced effect on biochar properties. The maximum carbofuran removal was achieved at pH 5. Freundlich and Temkin models best fit the equilibrium data. Biochars produced at 700 °C showed the highest sorption intensity. The adsorption process was likely to be a favorable chemisorption process with electrostatic interactions between carbofuran molecules and biochar surface. Acid-base interactions, electrophilic addition reactions and amide bond formations are the possible mechanisms of carbofuran adsorption. Overall, biochars prepared from tea waste can be utilized as effective adsorbents for removal of aqueous carbofuran.