A Thionin Stain for Visualizing Bone Cells, Mineralizing Fronts and Cement Lines in Undecalcified Bone Sections

A staining method is described using thionin, for undecalcified deacrylated bone sections. RNA is stained purplish violet, allowing still active osteoblasts to be distinguished from lining cells. Staining intensity of mineralized bone is related to the degree of mineralization. Mineralizing fronts and cement lines are visualized clearly. Lamellae show an alternate pattern. Histomorphometric parameters such as osteon thickness and interstitial bone thickness can be measured without using polarized light. The mineralizing front can be assessed and expressed as a percentage of the osteoblast-covered interface between osteoid and mineralized bone. The stain is also useful for qualitative assessment of metabolic bone disease. Thionin stained sections can be kept for at least one year when stored hi the dark at 7 C.     

Gynandromorphs of the pycnogonid Anoplodactylus portus

A large sample of the pycriogonid Anoplodactylus portus , collected from the Pacific side of the Panama Canal Zone, contains a high percentage of gynandromorphs. The literature on aquatic arthropod gynandromorphs is outlined. The nature and variations of the sexual mosaic population are described and discussed. The several morphological differences between normal and mosaic members of the population are illustrated, and the possible origin of these gynandromorphs is discussed.     

富士Ⅱ玻璃离子充填材料修复楔状缺损的临床疗效观察

目的：比较富士Ⅱ玻璃离子与普通玻璃离子充填材料修复楔状缺损的临床疗效：方法：58例患者324颗楔状缺损患牙随机分为2组,分别用富士Ⅱ玻璃离子（实验组）和普通玻璃离子材（对照组）进行修复,观察修复后半年、一年和两年的充填效果。结果：富士Ⅱ玻璃离子和普通玻璃离子充填材料的成功率0．5年分别为98．15％、87．04％;1年分别为93．83％、71．25％;2年分别为89．38％、58．60％,修复后0．5年、1年、2年相比差异均有有显著性,（P〈0．01）。结论：富士Ⅱ玻璃离子充填材料修复楔状缺损效果好,是充填楔状缺损较理想的材料。     

骨水泥强化椎弓根螺钉联合椎间融合复位治疗老年重度腰椎滑脱的临床研究

摘要 目的：观察椎间融合复位联合骨水泥强化椎弓根螺钉治疗老年重度腰椎滑脱的临床效果。方法：回顾性分析我院于2016年3月~2019年3月期间收治的老年重度腰椎滑脱患者92例,根据治疗方案的不同可将患者分为A组（n=44）和B组（n=48）,A组给予椎弓根螺钉联合椎间融合复位治疗,B组给予骨水泥强化椎弓根螺钉联合椎间融合复位治疗,对比两组视觉疼痛模拟评分（VAS）、Oswestry功能障碍指数（ODI）及日本骨科协会（JOA）腰腿痛评分、临床指标、滑脱距离、滑脱率、椎间隙高度、椎间融合率、椎间孔高度、并发症及螺钉松动情况。结果：术后12个月,两组VAS、ODI、JOA评分均下降,且B组低于A组（P<0.05）。两组术中出血量对比组间无统计学差异（P>0.05）,B组手术时间长于A组,住院时间短于A组,椎间融合率高于A组（P<0.05）。术后12个月,两组滑脱距离、滑脱率均下降,且B组小于A组（P<0.05）。术后12个月,两组椎间隙高度、椎间孔高度均升高,且B组高于A组（P<0.05）。两组并发症发生率组间对比无差异（P>0.05）。结论：老年重度腰椎滑脱患者椎间融合复位联合骨水泥强化椎弓根螺钉治疗,虽一定程度上延长了手术时间,但可促进临床症状,改善椎间高度及腰椎滑脱程度,缩短住院时间,且不增加并发症发生率。     

Eco‐efficiency assessment of calcium sulfoaluminate clinker production

Calcium sulfoaluminate‐based cements (CSA) are proposed as a cement alternative with a low carbon footprint. The nature of CSA makes the manufacturing process to require lower temperature, less fuel, and less calcite. However, it requires aluminum oxide, Al₂O₃, which would be originated from bauxite and bauxite‐derived wastes, and sulfur, coming from calcium sulfate or elemental sulfur. An eco‐efficiency assessment of CSA cements, benchmarked against the conventional Portland cement, has been performed following the principles of ISO 14045 on eco‐efficiency for a total of 240 CSA clinker production scenarios. The eco‐efficiency indicator relates an environmental indicator with a product system value indicator, and it is calculated for each of the studied parameters: bauxite geographical origin, the fuel used for clinkering, the source of sulfur, and the composition of the clinker. Eco‐efficiency results show a strong dependence on the origin of bauxite, while other parameters, as the fuel used, its content in sulfur, or the supply of other raw materials, are of less importance. The most eco‐efficient solutions are those with certain closeness to bauxite sources. To achieve global solutions, that is, cement‐making based on CSA independently of the origin of the raw materials, the amount of bauxite needs to be minimized and CSA composition restricted.     

Dual-curing resin cement with colour indicator for adhesively cemented restorations to dental tissues: Change of colour by curing and some physical properties

The study was aimed to investigate a color indicator containing dual curing resin composite luting cement and to plot the color change to the time of solidification of the cement. In addition some physical properties were studied. Specimens were made of a dual-cure resin cement (Maxcem Elite™ Chroma, Kerr, Orange, CA, USA) and polymerized by autopolymerization only, or with light initiated polymerization. A spectrophotometer was used to quantify the color change of the cement as plotted with the curing time. The efficacy of the curing process was studied by measuring water sorption and the ultimate flexural properties of the cement. The results showed that the flexural strength of cement after autopolymerization was 27.3 MPa and after light initiated polymerization 48.1 MPa. Young’s modulus of bending was 2089.3 MPa and 3781.5 MPa respectively for the same cement samples. Water sorption after two weeks for the autopolymerization cement samples was −1.12 wt% and for the light initiated polymerization samples 0.56 wt%. Non-parametric Spearman’s correlation was measured for autopolymerized cement samples between variables for color and solidification load (N), which showed a strong correlation between curing process and color change (p < 0.05). There was a correlation between the color change and degree of monomer conversion of the dual curing resin composite luting cement which contained a color indicator system for polymerization reaction. The study also suggested that autopolymerization only resulted in suboptimal polymerization of the cement. By additional light curing considerably higher flexural properties were obtained.     

Finite element analysis of Stryker Xia pedicle screw in artificial bone samples with and without supplemental cement augmentation

A validated, using in vitro biomechanical testing, finite element model was used to evaluate the affects of (1) cement augmentation and (2) an intact posterior cortex in osteoporotic bone. The presence of augmentation and/or a posterior cortical cortex increased the stabilization of the pedicle screw 2–5 fold. Placement of cement influenced failure load and toggle; with distal placement having the largest increase in failure load and decrease in cephalad–caudad toggle. The presence of posterior cortex caused a decrease in the amount of toggle, a proximal shift of the center of rotation and an increase in the maximum failure force.     

Solubility and disintegration of a glass ionomer cement

ABSTRACT

The mechanism of erosion of a glass ionomer cement (PR Scell) was studied using two experimental procedures: discs of dental cement were immersed in distilled water under unrenewed conditions as defined by ISO standard or under continuously running distilled water to simulate the oral environment. Both experiments suggest that erosion is important and highly correlated to the cryolithe material included in the formulation of this cement.     

椎体静脉稀疏区注入骨水泥对PVP术中骨水泥渗漏的影响

目的:探讨椎体静脉稀疏区注入骨水泥对骨质疏松椎体压缩性骨折患者行经皮穿刺椎体成形术(percutaneous vertebroplasty,PVP)术中骨水泥渗漏的影响。方法:选择西安交通大学第二附属医院2014年1月至2018年6月收治的61例骨质疏松椎体压缩性骨折患者,根据骨水泥注入区域的不同,将所有患者分为A组(30例)及B组(31例),A组骨水泥注入区域为椎体静脉密集区(椎体中1/3平面处),B组骨水泥注入区域为椎体静脉稀疏区(椎体上1/3及下1/3平面处),对比两组的骨水泥渗漏率,术前、术后6个月时的视觉模拟评分(Visual analogue scale,VAS),治疗中的骨水泥用量、椎体高度恢复率及cobb角恢复度数。结果:B组的骨水泥渗漏率及骨水泥用量均明显低于A组(P0.05)。两组的VAS评分、椎体高度恢复率、cobb角恢复情况对比差异无统计学意义(P0.05)。结论:与椎体静脉密集区相比,在椎体静脉稀疏区注入骨水泥可显著降低骨质疏松椎体压缩性骨折患者PVP术中骨水泥渗漏率,椎体静脉稀疏区可作为PVP术中骨水泥注射的一个相对安全区域。     

In vitro study of using calcium phosphate cement as immunoisolative device to enclose insulinoma/agarose microspheres as bioartificial pancreas

In this study, the feasibility of using calcium phosphate cement (CPC) as immunoisolative device to enclose insulinoma/agarose microspheres as bioartificial pancreas was evaluated. We fabricated a chamber by CPC and utilized X-ray diffraction, Scanning electron microscope and Mercury intrusion porosimetry to identify the characters of the CPC chamber. The nominal molecular weight cut-off and cytotoxicity of CPC chamber were also evaluated. An insulinoma cell line (RIN-m5F) was chosen as insulin source and encapsulated in agarose microspheres and then enclosed in preformed CPC chamber. Insulin secretion was analyzed by Enzyme-linked immunosorbant assay to evaluate the function of insulinoma enclosed in CPC chamber. Results showed that the CPC chamber was non-cytotoxicity to insulinoma and can block the penetration of molecules which molecular weight larger than 12.4 kDa. Insulinoma inside the CPC chamber can secrete insulin in stable level for 30 days. This study indicated that we may use CPC as immunoisolative material to enclose insulinoma/agarose microspheres as bioartificial pancreas.