Ultrastructural and biochemical aspects of cell wall reconstitution in recalcitrant (grapevine) and regenerating (tobacco) leaf protoplasts

Summary To identify possible reasons that may contribute to recalcitrance in plant protoplasts, the time course of new cell wall deposition was studied by scanning electron microscopy in protoplasts of a recalcitrant species, the grapevine. Results showed that microfibrils were developed after 2 days of culture, that complete cell wall formation occurred on Day 6 to 7 of protoplast culture, and its ultrastructural appearance was identical to that of grapevine leaf-derived callus cells. In addition, a comparative study was undertaken on [U-¹⁴C]glucose uptake and incorporation in ethanol-soluble, cellulosic, and noncellulosic polysaccharide fractions in protoplasts of grapevine and of a readily regenerating species, tobacco, during culture. There was a significantly higher [U-¹⁴C]glucose uptake by tobacco than by grapevine protoplasts. The label distribution in the ethanol-soluble, cellulosic, and noncellulosic fractions of newly synthesized cell walls differed quantitatively between the two species. In particular, the labeled glucose incorporated in the noncellulosic cell wall fraction was threefold greater in tobacco than in grapevine protoplasts. Differences were also revealed in the monosaccharide composition of this fraction between the two species. Addition of dimethyl sulfoxide to the culture medium resulted in a dramatic increase in [U-¹⁴C]glucose uptake by grapevine protoplasts, whereas it exhibited a limited effect in tobacco protoplasts. It showed no effect on the ultrastructural characteristics of new cell wall nor on the incorporation rate of labeled glucose in the cellulosic and noncellulosic cell wall fractions.     

Encapsulation enhances protoplast fusant stability

A barrier to cost-efficient biomanufacturing is the instability of engineered genetic elements, such as plasmids. Instability can also manifest at the whole-genome level, when fungal dikaryons revert to parental species due to nuclear segregation during cell division. Here, we show that by encapsulating Saccharomyces cerevisiae-Pichia stipitis dikaryons in an alginate matrix, we can limit cell division and preserve their expanded metabolic capabilities. As a proxy to cellulosic ethanol production, we tested the capacity of such cells to carry out ethanologenic fermentation of glucose and xylose, examining substrate use, ploidy, and cell viability in relation to planktonic fusants, as well as in relation to planktonic and encapsulated cell cultures consisting of mixtures of these species. Glucose and xylose consumption and ethanol production by encapsulated dikaryons were greater than planktonic controls. Simultaneous co-fermentation did not occur; rather the order and kinetics of glucose and xylose catabolism by encapsulated dikaryons were similar to cultures where the two species were encapsulated together. Over repeated cycles of fed-batch culture, encapsulated S. cerevisiae-P. stipitis fusants exhibited a dramatic increase in genomic stability, relative to planktonic fusants. Encapsulation also increased the stability of antibiotic-resistance plasmids used to mark each species and preserved a fixed ratio of S. cerevisiae to P. stipitis cells in mixed cultures. Our data demonstrate how encapsulating cells in an extracellular matrix restricts cell division and, thereby, preserves the stability and biological activity of entities ranging from genomes to plasmids to mixed populations, each of which can be essential to cost-efficient biomanufacturing.     

Nitrous oxide emissions during establishment of eight alternative cellulosic bioenergy cropping systems in the North Central United States

Greenhouse gas (GHG) emissions from soils are a key sustainability metric of cropping systems. During crop establishment, disruptive land‐use change is known to be a critical, but under reported period, for determining GHG emissions. We measured soil N₂O emissions and potential environmental drivers of these fluxes from a three‐year establishment‐phase bioenergy cropping systems experiment replicated in southcentral Wisconsin (ARL) and southwestern Michigan (KBS). Cropping systems treatments were annual monocultures (continuous corn, corn–soybean–canola rotation), perennial monocultures (switchgrass, miscanthus, and poplar), and perennial polycultures (native grass mixture, early successional community, and restored prairie) all grown using best management practices specific to the system. Cumulative three‐year N₂O emissions from annuals were 142% higher than from perennials, with fertilized perennials 190% higher than unfertilized perennials. Emissions ranged from 3.1 to 19.1 kg N₂O‐N ha^?1 yr^?1 for the annuals with continuous corn > corn–soybean–canola rotation and 1.1 to 6.3 kg N₂O‐N ha^?1 yr^?1 for perennials. Nitrous oxide peak fluxes typically were associated with precipitation events that closely followed fertilization. Bayesian modeling of N₂O fluxes based on measured environmental factors explained 33% of variability across all systems. Models trained on single systems performed well in most monocultures (e.g., R² = 0.52 for poplar) but notably worse in polycultures (e.g., R² = 0.17 for early successional, R² = 0.06 for restored prairie), indicating that simulation models that include N₂O emissions should be parameterized specific to particular plant communities. Our results indicate that perennial bioenergy crops in their establishment phase emit less N₂O than annual crops, especially when not fertilized. These findings should be considered further alongside yield and other metrics contributing to important ecosystem services.     

Investment risk in bioenergy crops

Perennial, cellulosic bioenergy crops represent a risky investment. The potential for adoption of these crops depends not only on mean net returns, but also on the associated probability distributions and on the risk preferences of farmers. Using 6‐year observed crop yield data from highly productive and marginally productive sites in the southern Great Lakes region and assuming risk neutrality, we calculate expected breakeven biomass yields and prices compared to corn (Zea mays L.) as a benchmark. Next we develop Monte Carlo budget simulations based on stochastic crop prices and yields. The crop yield simulations decompose yield risk into three components: crop establishment survival, time to maturity, and mature yield variability. Results reveal that corn with harvest of grain and 38% of stover (as cellulosic bioenergy feedstock) is both the most profitable and the least risky investment option. It dominates all perennial systems considered across a wide range of farmer risk preferences. Although not currently attractive for profit‐oriented farmers who are risk neutral or risk averse, perennial bioenergy crops have a higher potential to successfully compete with corn under marginal crop production conditions.     

Predicted avian responses to bioenergy development scenarios in an intensive agricultural landscape

Conversion of native prairie to agriculture has increased food and bioenergy production but decreased wildlife habitat. However, enrollment of highly erodible cropland in conservation programs has compensated for some grassland loss. In the future, climate change and production of second-generation perennial biofuel crops could further transform agricultural landscapes and increase or decrease grassland area. Switchgrass (Panicum virgatum) is an alternative biofuel feedstock that may be economically and environmentally superior to maize (Zea mays) grain for ethanol production on marginally productive lands. Switchgrass could benefit farmers economically and increase grassland area, but there is uncertainty as to how conversions between rowcrops, switchgrass monocultures and conservation grasslands might occur and affect wildlife. To explore potential impacts on grassland birds, we developed four agricultural land-use change scenarios for an intensively cultivated landscape, each driven by potential future climatic changes and ensuing irrigation limitations, ethanol demand, commodity prices, and continuation of a conservation program. For each scenario, we calculated changes in area for landcover classes and predicted changes in grassland bird abundances. Overall, birds responded positively to the replacement of rowcrops with switchgrass and negatively to the conversion of conservation grasslands to switchgrass or rowcrops. Landscape context and interactions between climate, crop water use, and irrigation availability could influence future land-use, and subsequently, avian habitat quality and quantity. Switchgrass is likely to provide higher quality avian habitat than rowcrops but lower quality habitat than conservation grasslands, and therefore, may most benefit birds in heavily cultivated, irrigation dependent landscapes under warmer and drier conditions, where economic profitability may also encourage conversions to drought tolerant bioenergy feedstocks.     

Short‐term harvesting of biomass from conservation grasslands maintains plant diversity

High yields are a priority in managing biomass for renewable energy, but the environmental impacts of various feedstocks and production systems should be equally considered. Mixed‐species, perennial grasslands enrolled in conservation programs are being considered as a source of biomass for renewable energy. Conservation grasslands are crucial in sustaining native biodiversity throughout the US Upper Midwest, and the effects of biomass harvest on biodiversity are largely unknown. We measured the effect of late‐season biomass harvest on plant community composition in conservation grasslands in three regions of Minnesota, USA from 2009 to 2012. Temporal trends in plant species composition within harvested grasslands were compared to unharvested grasslands using mixed effects models. A before‐after control‐impact approach using effect sizes was applied to focus on pre‐ and postharvest conditions. Production‐scale biomass harvest did not affect plant species richness, species or functional group diversity, nor change the relative abundance of the main plant functional groups. Differences in the relative abundances of plant functional groups were observed across locations; and at some locations, changed through time. The proportion of non‐native species remained constant, while the proportion of noxious weeds decreased through time in both harvested and unharvested grasslands at the central location. Ordination revealed patterns in species composition due to location, but not due to harvest treatment. Therefore, habitat and bioenergy characteristics related to grassland plant communities are not expected to change due to short‐term or intermittent late‐season biomass harvest.     

The economics of producing sustainable aviation fuel: a regional case study in Queensland,Australia

The airline industry has a strong interest in developing sustainable aviation fuels, in order to reduce their exposure to increasing oil prices and cost liability for greenhouse gas emissions. The feasibility and cost of producing sustainable biomass‐based jet fuels at a sufficient scale to materially address these issues is an enormous challenge. This paper builds directly on the biophysical study by H.T. Murphy, D.A. O'Connell, R.J. Raison, A.C. Warden, T.H. Booth, A. Herr, A.L. Braid, D.F. Crawford, J.A. Hayward, T. Javonovic, J.G. McIvor, M.H. O'Connor, M.L. Poole, D. Prestwidge, N. Raisbeck‐Brown & L. Rye, In review, which examined a 25 year scale‐up strategy to produce 5% of projected jet fuel demand in Australia in 2020 (470 mL) in the Fitzroy region of Queensland, Australia. The strategy was based on the use of a mixed ligno‐cellulosic biomass feedstock and assumed, for the sake of exploring and quantifying the scenario, a simplified two‐step conversion process – conversion of biomass to crude bio‐oil within the region, and upgrade to jet fuel at a central Brisbane facility. This paper provides details on the costs of production in this scenario, focusing on two different strategies for biomass utilization, and two types of novel small–medium scale conversion technologies. The cost analyses have taken into account technology learning curves, different economies of scale and key cost sensitivities. The cost of biomass‐based jet fuels is estimated to be between 0.70 and 1.90 The airline industry has a strong interest in developing sustainable aviation fuels, in order to reduce their exposure to increasing oil prices and cost liability for greenhouse gas emissions. The feasibility and cost of producing sustainable biomass‐based jet fuels at a sufficient scale to materially address these issues is an enormous challenge. This paper builds directly on the biophysical study by H.T. Murphy, D.A. O'Connell, R.J. Raison, A.C. Warden, T.H. Booth, A. Herr, A.L. Braid, D.F. Crawford, J.A. Hayward, T. Javonovic, J.G. McIvor, M.H. O'Connor, M.L. Poole, D. Prestwidge, N. Raisbeck‐Brown & L. Rye, In review, which examined a 25 year scale‐up strategy to produce 5% of projected jet fuel demand in Australia in 2020 (470 mL) in the Fitzroy region of Queensland, Australia. The strategy was based on the use of a mixed ligno‐cellulosic biomass feedstock and assumed, for the sake of exploring and quantifying the scenario, a simplified two‐step conversion process – conversion of biomass to crude bio‐oil within the region, and upgrade to jet fuel at a central Brisbane facility. This paper provides details on the costs of production in this scenario, focusing on two different strategies for biomass utilization, and two types of novel small–medium scale conversion technologies. The cost analyses have taken into account technology learning curves, different economies of scale and key cost sensitivities. The cost of biomass‐based jet fuels is estimated to be between 0.70 and 1.90 $ L^?1 when the efficiency of conversion of biomass to biocrude and subsequently to aviation fuel is varied by ±10% of published values, with an average value of 1.10 $ L^?1. This is within the range of the projected 2035 conventional jet fuel price of 1.50 $ L^?1. Therefore, biomass‐based jet fuel has the potential to contribute to supply of Australia's jet fuel needs in the future.     

Conversion for Avicel and AFEX pretreated corn stover by Clostridium thermocellum and simultaneous saccharification and fermentation: insights into microbial conversion of pretreated cellulosic biomass

In this study, efforts were taken to compare solubilization of Avicel and AFEX pretreated corn stover (AFEX CS) by SSF and Clostridium thermocellum fermentation, with an aim to gain insights into microbial conversion of pretreated cellulosic biomass. Solubilization rates for AFEX CS are comparable for the two systems while solubilization of Avicel is much faster by C. thermocellum. Initial catalyst loading impacts final cellulose conversion for SSF but not for C. thermocellum. Hydrolysis of the two substrates using cell-free C. thermocellum fermentation broth revealed much smaller difference in cellulose conversion than the difference observed for growing cultures. Tests on hemicellulose removal and particle size reduction for AFEX CS indicated that substrate accessibility is very important for enhanced solubilization by C. thermocellum.     

Accumulation of recombinant cellobiohydrolase and endoglucanase in the leaves of mature transgenic sugar cane

A major strategic goal in making ethanol from lignocellulosic biomass a cost-competitive liquid transport fuel is to reduce the cost of production of cellulolytic enzymes that hydrolyse lignocellulosic substrates to fermentable sugars. Current production systems for these enzymes, namely microbes, are not economic. One way to substantially reduce production costs is to express cellulolytic enzymes in plants at levels that are high enough to hydrolyse lignocellulosic biomass. Sugar cane fibre (bagasse) is the most promising lignocellulosic feedstock for conversion to ethanol in the tropics and subtropics. Cellulolytic enzyme production in sugar cane will have a substantial impact on the economics of lignocellulosic ethanol production from bagasse. We therefore generated transgenic sugar cane accumulating three cellulolytic enzymes, fungal cellobiohydrolase I (CBH I), CBH II and bacterial endoglucanase (EG), in leaves using the maize PepC promoter as an alternative to maize Ubi1 for controlling transgene expression. Different subcellular targeting signals were shown to have a substantial impact on the accumulation of these enzymes; the CBHs and EG accumulated to higher levels when fused to a vacuolar-sorting determinant than to an endoplasmic reticulum-retention signal, while EG was produced in the largest amounts when fused to a chloroplast-targeting signal. These results are the first demonstration of the expression and accumulation of recombinant CBH I, CBH II and EG in sugar cane and represent a significant first step towards the optimization of cellulolytic enzyme expression in sugar cane for the economic production of lignocellulosic ethanol.     

Ethanol from sugarcane in Brazil: a ‘midway’ strategy for increasing ethanol production while maximizing environmental benefits

This article reviews the history and current state of ethanol production from sugarcane in Brazil and presents a strategy for improving ecosystem services and production. We propose that it is possible to produce ethanol from sugarcane while maintaining or even recovering some of Brazil's unique neotropical biodiversity and ecosystem climate services. This approach to the future of sustainable and responsible ethanol production is termed the ‘midway’ strategy. The ‘midway’ strategy involves producing the necessary biotechnology to increase productivity while synergistically protecting and regenerating rainforest. Three main areas of scientific and technological advance that are key to realizing the ‘midway’ strategy are: (i) improving the quality of scientific data on sugarcane biology as pertains to its use as a bioenergy crop; (ii) developing technologies for the use of bagasse for cellulosic ethanol; and (iii) developing policies to improve the ecosystem services associated with sugarcane landscapes. This article discusses these three issues in the general context of biofuels production and highlights examples of scientific achievements that are already leading towards the ‘midway’ strategy.