Insights into protective effects of medium additives on animal cells under fluid stresses: the hydrophobic interactions

Animal cells in suspension culture can suffer severe mechanical damage from bursting gas bubbles or other hydrodynamic force sources. Certain chemical additives in the culture media, particularly some surface-active chemicals, can effectively protect animal cells against such damage. Previously we proposed that the protective effect is associated with the adsorption of the additives in the cell membrane through hydrophobic binding of the surface-active molecules to the membrane. Adsorption of the additives to the cell membrane may lead to decreased hydrophobicity of the cell surface, thus eliminating cell adhesion to bubbles and reducing cell damage from bursting bubbles. In this study, we measured the hydrophobicity of two insect cell lines based on cell adhesion to hydrocarbon phase and its influence by surface-active chemicals, Pluronic F68, a methylcellulose and a polyethylene glycol. The experimental results showed strong support for the aforecited cell protection mechanism.     

Surface properties of fibrinogen and fibrin

By contact angle measurements on layers of fibrinogen and fibrin, it can be shown that the transformation from fibrinogen to fibrin is accompanied by a change in surface properties from very hydrophilic (fibrinogen) to moderately but definitely hydrophobic (fibrin). It is also shown that, contrary to serum albumin and gamma globulin, fibrinogen does not become more hydrophobic upon drying.     

Molecular modeling of the amphipathic helices of the plasma apolipoproteins.

In this paper we propose a classification of the amphipathic helical repeats occurring in the plasma apolipoprotein sequences. It is based upon the calculation of the molecular hydrophobicity potential around the helical segments. The repeats were identified using a new autocorrelation matrix, based upon similarities of hydrophobic and hydrophilic properties of the amino acid residues within the apolipoprotein sequences. The helices were constructed by molecular modeling, the molecular hydrophobicity potential was calculated, and isopotential contour lines drawn around the helices yielded a three-dimensional visualization of the hydrophobicity potential. Two classes of apolipoproteins could be differentiated by comparing the hydrophobic angles obtained by projection of the isopotential contour lines on a plane perpendicular to the long axis of the helix. The isopotential contour lines around apo AI, AIV, and E are more hydrophilic than hydrophobic, whereas they are of similar intensity for apo AII, CI, and CIII. In both cases discoidal lipid-protein complexes are generated, with the amphipathic helices around the edge of the lipid core. The long axis of the helices is oriented parallel to the phospholipid acyl chains and the hydrophilic side of the helix toward the aqueous phase. As a result of the differences in hydrophobicity potential, the contact between the hydrophobic side of the helices and the phospholipid acyl chains is larger for apo AII, CI, and CIII than for the other apolipoproteins. This might account for the greater stability of the discoidal complexes generated between phospholipids and these apoproteins.     

Basic carboxyl groups of hemoglobin S: Influence of oxy-deoxy conformation on the chemical reactivity of Glu-43(β)

The -carboxyl groups of Glu-43() and Glu-22() of hemoglobin-S (HbS), two intermolecular contact residues of deoxy protein, are activated by carbodiimide atp H 6.0. The selectivity of the modification by the two nucleophiles, glycine ethyl ester (GEE) and glucosamine, is distinct. Influence ofN-hydroxysulfosuccinimide, a reagent that rescues carbodiimide-activated carboxyl (O-acyl isourea) as sulfo-NHS ester, on the overall selectivity and efficiency of the coupling of Glu-22() and Glu-43() with nucleophiles has been investigated. Sulfo-NHS increases the extent of coupling of nucleophiles to HbS. The rescuing efficiency of sulfo-NHS(increase in modification) with GEE and galactosamine as nucleophiles is 2.0 and 2.8, respectively. In the presence of sulfo-NHS, the extent of modification of a carboxyl group is a direct reflection of the extent to which it is activated (i.e., the protonation state of the carboxyl group). The modification reaction exhibits very high selectivity for Glu-43() with GEE and galactosamine (GA) in the presence of sulfo-NHS. From the studies of the kinetics of amidation of oxy-HbS at its Glu-43() (i.e., chemical reactivity) as a function of thepH in the region of 5.5–7.5, the apparentpKa of its -carboxyl group has been calculated to be 6.35. Deoxygenation of HbS, nearly doubles the chemical reactivity of Glu-43() of HbS atpH 7.0. It is suggested that the increased hydrophobicity of the microenvironment of Glu-43(), which occurs on deoxygenation of the protein, is reflected as the increased chemical reactivity of the -carboxyl group and could be one of the crucial preludes to the polymerization process.     

Transmembrane diffusion of hydrophobic antimicrobial agents and cell surface hydrophobicity in Bacteroides fragilis

The transmembrane diffusion of hydrophobic antimicrobial agents, e.g. lincomycin and clindamycin, was examined in Bacteroides fragilis which is sensitive to these agents. The results showed that these agents penetrate efficiently through the outer membrane. Cell surface hydrophobicity measured by the partition assay between water and p-xylene revealed that the cell surface of B. fragilis is more hydrophobic than that of Salmonella typhimurium or Pseudomonas aeruginosa. Furthermore, treatment with low concentrations of surfactant caused cell lysis. These results suggest that the cell surface hydrophobicity in B. fragilis plays an important role in the efficient transmembrane penetration of hydrophobic compounds. This efficiency explains the susceptibility of B. fragilis to hydrophobic antimicrobial agents.     

A rat oocyte differentiation antigen (OA-1) detected by a monoclonal antibody

Cell surface antigenic changes associated with differentiation of the rat oocyte and early embryo have been demonstrated with a monoclonal antibody (anti-OA-1). Antigen is first detectable coincident with initiation of oocyte growth, is a constant feature of all growing oocytes and displays a redistribution during meiotic maturation. Following fertilization, antigen is detectable on the surface of the embryo through the four-cell stage. This first monospecific marker for the rat oocyte and embryo should prove useful in probing structure/function relationships in oocyte growth, meiotic maturation fertilization, and/or early embryonic development.     

Redistribution of cell surface transferrin receptors prior to their concentration in coated pits as revealed by immunoferritin labels

Summary Immunocytochemistry has been used to study distribution of cell surface transferrin receptors in erythroid, leukemic (K562) cells. The cells were fixed and labelled with monoclonal (OKT-9) anti-transferrin receptor antibodies; the antibody-labelled receptors were then detected by either immunofluoresceinor immunoferritin-antimouse-antibody conjugates. Typically, the immunoferritin labels were distributed diffusely at the non-coated regions of the cell surface as well as concentrated in the clathrincoated pits. To examine further this pattern of distribution, cells were labelled at 0° C and then warmed to 37° C for zero to 30 min prior to fixation. The majority of the immunoferritin labels were initially dispersed in small groups at the non-coated regions of the cell surface (mean = 6 immunoferritin labels/cluster), but larger groups were common subsequent to incubation at 37° C (mean = 13 immunoferritin labels/cluster). However, the size of immunoferritin labels in the coated pits was unchanged (mean = 12 immunoferritin labels/pit). Immunoferritin labels were typical in coated and uncoated vesicles l min after warming to 37° C, but common in endosomes, multivesicular bodies and lysosomes by 30 min. It appears that single cell-surface receptors form large aggregates prior to their concentration in coated pits. Coated vesicles, uncoated vesicles, and endosomal vacuoles may together form the non-lysosomal compartment where the internalized receptors might be dissociated from the ligands (antibodies).     

Host receptor sites involved in the attachment of Bdellovibrio bacteriovorus and Bdellovibrio stolpii

Abstract The location of lipoteichoic acid and 3 cell wall-associated protein antigens in fresh isolates of Streptococcus mutans (serotype c ) and in variants derived from these parental strains by repeated subculture in vitro has been examined by electrophoretic and dot-immunobinding techniques. Following subculture there was a marked shift in the distribution of all four antigens from the cell wall to the extracellular culture supernatants. It is therefore apparent that that the decreased hydrophobicity and the impaired ability of the subcultured variants to colonise in vivo, as observed by others, cannot be correlated with changes in a single surface molecule.     

Mutational analysis of the proteolytic cleavage site of glycoprotein B (gB) of Marek''s disease virus

The Marek's disease virus (MDV) glycoprotein B (gB) precursor, gp100, is proteolytically cleaved into two disulfide-linked subunits, gp60 and gp49. In the gB homologs of most other herpesviruses, a tetrapeptide, Arg-Xaa-Arg-Arg, is immediately upstream from the predicted cleavage site. We have investigated the specificity of the proteolytic cleavage in gplOO by introducing mutations within its predicted cleavage site (Arg-Leu-Arg-Arg) and expressed these mutants in recombinant fowlpox virus (FPV). The results show that all three Arg residues at the predicted cleavage site play an important role in the specific proteolytic cleavage of gp100. Furthermore, we demonstrated that the cleavage of gplOO is not necessary for transport of gB to the cell surface.     

Crystal structure to 2.45 A resolution of a monoclonal Fab specific for the Brucella A cell wall polysaccharide antigen.

The atomic structure of an antibody antigen-binding fragment (Fab) at 2.45 A resolution shows that polysaccharide antigen conformation and Fab structure dictated by combinatorial diversity and domain association are responsible for the fine specificity of the Brucella-specific antibody, YsT9.1. It discriminates the Brucella abortus A antigen from the nearly identical Brucella melitensis M antigen by forming a groove-type binding site, lined with tyrosine residues, that accommodates the rodlike A antigen but excludes the kinked structure of the M antigen, as envisioned by a model of the antigen built into the combining site. The variable-heavy (VH) and variable-light (VL) domains are derived from genes closely related to two used in previously solved structures, M603 and R19.9, respectively. These genes combine in YsT9.1 to form an antibody of totally different specificity. Comparison of this X-ray structure with a previously built model of the YsT9.1 combining site based on these homologies highlights the importance of VL:VH association as a determinant of specificity and suggests that small changes at the VL:VH interface, unanticipated in modeling, may cause significant modulation of binding-site properties.