Long‐lived electrochemiluminescence of ruthenium (II) complexes/tri‐n‐propylamine in aqueous solutions

Although the clinical use of immunoassays based on the oxidative‐reduction electrochemiluminescence (ECL) of tris(2,2′‐bipyridine)ruthenium (II)/tri‐n‐propylamine has been a great success, elucidation of the ECL generation mechanism still remains unsatisfactory. We report here our experimental observations of long‐lived luminescence that remains detectable for several seconds after termination of electrochemical heterogeneous oxidation. Long‐lived luminescence was observed in both a surfactant‐free buffer and a surfactant‐containing broadly used commercial buffer under different conditions. The slow decay of emission seems to have been unnoticed in previous ECL mechanistic studies. Within the frame of the reaction schemes so far proposed, its origin is inconclusively ascribed to the reductive‐oxidation process of ruthenium (II) complex, that is Ru(bpy)₃²⁺ → Ru(bpy)₃¹⁺ → Ru(bpy)₃²⁺* → Ru(bpy)₃²⁺ with the involvement of the tri‐n‐propylamine‐derived radical cation. It is anticipated that long‐lived ECL will suggest a research approach to separate some homogeneous reactions from the complicated reaction system and therefore help to resolve the mechanistic mystery.     

An automated immunoassay for early specificity profiling of antibodies

Antibody-based therapeutics are of great value for the treatment of human diseases. In addition to functional activity, affinity or physico-chemical properties, antibody specificity is considered to be one of the most crucial attributes for safety and efficacy. Consequently, appropriate studies are required before entering clinical trials.

High content protein arrays are widely applied to assess antibody specificity, but this commercial solution can only be applied to final therapeutic antibody candidates because such arrays are expensive and their throughput is limited. A flexible, high-throughput and economical assay that allows specificity testing of IgG or Fab molecules during early discovery is described here. The 384-well microtiter plate assay contains a comprehensive panel of 32 test proteins and uses electrochemiluminescence as readout.

The Protein Panel Profiling (3P) was used to analyze marketed therapeutic antibodies that all showed highly specific binding profiles. Subsequently, 3P was applied to antibody candidates from early discovery and the results compared well with those obtained with a commercially available high content protein chip. Our results suggest that 3P can be applied as an additional filter for lead selection, allowing the identification of favorable antibody candidates in early discovery and thereby increasing the speed and possibility of success in drug development.     

Fouling communities and degradation of archeological metals in the coastal sea of the Southwestern Gulf of Mexico

Corrosion and biofouling phenomena of cast iron and brass were evaluated under natural conditions to determine the degradation process of archeological artifacts. Field exposure studies of experimental materials were conducted over 15 months at an offshore position in the sea of Campeche in the Gulf of Mexico. Corrosion was determined by gravimetric measurements. The community structure of the benthic assemblage inhabiting the surfaces of both materials was evaluated. A total of 53 species was identified. The community in both cases was composed of a small number of species. Encrusting, attached and erect life forms were dominant on iron. Attached life forms were dominant on brass. Biofouling produced a decrease in the weight loss measurements of cast iron samples. Biofouling provided a beneficial factor for in situ preservation of iron archeological artifacts in wreck sites.     

Influence of fouling on the efficiency of sacrificial anodes in providing cathodic protection in Southeast Asian tropical seawater

Aluminum and zinc based sacrificial anodes are routinely used to provide corrosion protection to metals (typically steel) exposed to seawater, for example in steel pipelines and storage tanks. However, the high fouling rates experienced in South East Asia means that both the anodes and the metals to be protected rapidly become coated with macrofoulers, which could potentially prevent the anodes from being effective. The present study, involving exposure tests of up to 18 months, indicates that both aluminum and zinc sacrificial anodes remain effective even after being completely coated with biofouling. Furthermore, it was easier to remove the biofouling on the cathodically protected samples than on their unprotected counterparts, possibly due to the higher local pH produced by cathodic protection at the metal and seawater interface.     

Copper complexing capacity in fresh-waters using the catechol-cathodic stripping voltammetric method

Abstract

The catechol-cathodic stripping voltammetric (CSV) method for measurement of the copper complexing capacity of marine and estuarine waters, has been modified and applied to fresh-waters. The optimum catechol concentration needed was the major difference between the two methods. It was found necessary to separately optimise the catechol concentration for each of the three fresh-water samples tested, presumably because of the much greater differences in the concentration of complexing ligands in fresh-water compared with marine or estuarine waters. This limits the usefulness of the CSV method for the determination of the complexing capacity of fresh-waters.

The total ligand concentration ([L_t]) and conditional stability constants (*K) derived for the three fresh-waters are compared with similar data obtained using an anodic stripping voltammetric (ASV) method. The set of copper-binding ligands determined using the CSV method were slightly lower in concentration, but stronger binding, than those obtained using the ASV method (CSV: [L_t] 0.04–0.06 μM, log K(pH 6) 8.9–9.4; ASV: [L_t] 0.11–0.17 μM, log *K(pH 6) 7.9–8.1).     

Glycomics-driven discoveries in schistosome research

Schistosome glycans and glycoconjugates play a prominent role in the parasite's biology, in particular in the interaction with the human host. A large amount of structural data regarding glycosylation of different schistosome life stages and glycoconjugate subsets has been collected in the last decade, but many significant gaps in our knowledge of the schistosomal glycome remain. Here we will present a concise review of the already available data guided by a selection of recently generated stage-specific glycan profiles, and discuss implications and prospects of glycomics studies of schistosomes.     

Highly sensitive and selective electrochemiluminescence determination of cholesterol utilizing a functional electrode with a core–shell nanostructure

A highly sensitive and selective method for the determination of cholesterol is required to evaluate trace amounts of cholesterol in test samples. In this work, selected gold nanoparticles (AuNPs) and 5‐amino‐2‐mercapto‐1,3,4‐thiadiazole (AMT) were used and a thin film of three‐dimensional gold–AMT core–shell nanoparticles (p‐AMT–AuNPs) was prepared using an electrochemical method. Cholesterol oxidase was then bonded to the film surface to give a functional electrode. Based on catalysis by the electrode functionalized for cholesterol and a luminol–H₂O₂ electrochemiluminescence (ECL) system, a highly sensitive and selective ECL method was developed for the determination of cholesterol. Under optimized conditions, ECL intensity showed a good linear relationship with cholesterol over the concentration range 0.05–11.0 µg/ml, with a correlation coefficient of 0.999 and a limit of detection of 0.02 µg/ml. The proposed method was used to determine cholesterol in dairy products with a relative standard deviation of < 1.8% and recovery rates of 98.1–104%. Copyright © 2015 John Wiley & Sons, Ltd.     

Electrochemiluminescence of an electrocatalytic action of etimicin on Tris(2,2′‐bipyridyl)ruthenium(II) immobilized in Nafion modified carbon paste electrode

A sensitive electrochemiluminescence (ECL) detection of etimicin at Tris(2,2′‐bipyridyl)ruthenium(II) [Ru(bpy)₃²⁺]–Nafion modified carbon paste electrodes was developed. The immobilized Ru(bpy)₃²⁺ shows good electrochemical and photochemical activities. Electrochemical and electrochemiluminescence characterizations of the modified carbon electrodes were made by means of cyclic voltammetry and electrochemical impendence spectroscopy. The modified electrode showed an electrocatalytic response to the oxidation of etimicin, producing a sensitized ECL signal. The ECL sensor showed a linear response to etimicin in the range of 8.0–160.0 ng mL^?1 with a detection limit of 6.7 ng mL^?1. This method for etimicin determination possessed good sensitivity and reproducibility with a coefficient of variation of 5.1% (n = 7) at 100 ng mL^?1. The ECL sensor showed good selectivity and long‐term stability. Its surface could be renewed quickly and reproducibly by a simple polish step. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of metformin hydrochloride using precolumn derivatization with acetaldehyde and capillary electrophoresis coupled with electrochemiluminescence

A novel method was developed using capillary electrophoresis (CE) coupled with tris(2,2′‐bipyridyl)ruthenium(II) electrogenerated chemiluminescence (ECL) for highly sensitive detection of metformin hydrochloride (MH) derivatizatized with acetaldehyde. The precolumn derivatization of MH with acetaldehyde was performed in phosphate buffer solution (0.3 mol/L, pH 7.5) at room temperature for 120 min. The effects of acetaldehyde concentration, buffer pH, electrokinetic voltage and injection time were investigated. Under optimized detection conditions, the MH ECL detection sensitivity was more than 120 times that without derivatization. The linear concentration range for MH was 0.001–15.00 μg/mL (with a correlation coefficient of 0.9992). The detection limit was 0.31 ng/mL with a signal:noise ratio of 3. The recoveries of MH in human urine were in the range 98.50–99.72%. Copyright © 2011 John Wiley & Sons, Ltd.