Photosynthetic pigment concentration, organization and interconversions in a pale green Syrian landrace of barley (Hordeum vulgare L., Tadmor) adapted to harsh climatic conditions

Tadmor is a Syrian barley landrace that has adapted to semi-arid environments. Its leaves are pale green because of a 30% decrease in the chlorophyll and the carotenoid content of the chloroplasts (leading to a 7·5% decrease in light absorption) compared with barley genotypes that are not adapted to harsh Mediterranean climatic conditions (e.g. Plaisant). This difference in pigment content was attenuated during growth of the plants in strong light, but was strongly amplified when strong light was combined with a high growth temperature. The low pigment content of Tadmor leaves was not associated with significant changes in the pigment distribution between the photosystems or between the reaction centres of the photosystems and their associated chlorophyll antennae. No significant difference in the photosynthetic activity (O₂ production per unit absorbed light) was observed between Tadmor and Plaisant. The conversion of violaxanthin to zeaxanthin in strong light and its reversal in darkness were much faster and operated at a higher capacity in Tadmor leaves compared with Plaisant leaves, resulting in an increased photostability of photosystem II in the former leaves. The accelerated xanthophylls interconversion in the Syrian landrace was associated with, and possibly related to, an increased fluidity of the thylakoid membranes. The lipid peroxide level was lower in Tadmor compared with Plaisant. In contrast, no difference was found in the non-photochemical quenching of chlorophyll fluorescence between the two barley genotypes. The data indicate that the pale green Syrian landrace is equipped to survive excessive irradiance through a passive reduction of the light absorptance of its leaves, which mitigates the heating effects of strong light, and through the active protection of its photochemical apparatus by a rapid xanthophyll cycling.     

Evaluating effect of arbuscular mycorrhizal fungal consortia and Azotobacter chroococcum in improving biomass yield of Jatropha curcas

This study was conducted to study the long-term impact of bioinoculants, Azotobacter chroococcum and arbuscular mycorrhizal fungi (AMF) on growth and biomass yield of Jatropha curcas grown in nursery and in field conditions. The experiment was set up in a randomized block design, and the following treatments was designed (T₁ = control, T₂ = Azotobacter, T₃ = inoculation with AMF, and T₄ = inoculation with Azotobacter + AMF). Data on various growth attributes (shoot height and shoot diameter) and biochemical parameters [leaf relative water content (LRWC), sugars, protein, and photosynthetic pigments] were recorded up to 6 months in the nursery and in the field (18 months). Results pertaining to morpho-physiological traits showed Azotobacter and AMF consortia increase shoot height, shoot diameter, LRWC, sugars, proteins, and photosynthetic pigments over control under nursery conditions. Besides enhancing the plant growth, these bioinoculants helped in better establishment of Jatropha plants under field conditions. A significant improvement in the shoot height, shoot diameter, fruit yield/plant, and seed yield (g)/plant was evident in 18-month-old Jatropha plants under field conditions when Azotobacter and AMF were co-inoculated. This work supports the application of bioinoculants for establishment of Jatropha curcas in semi-arid regions.     

LiGAPS-Beef,a mechanistic model to explore potential and feed-limited beef production 1: model description and illustration

The expected increase in the global demand for livestock products calls for insight in the scope to increase actual production levels across the world. This insight can be obtained by using theoretical concepts of production ecology. These concepts distinguish three production levels for livestock: potential (i.e. theoretical maximum) production, which is defined by genotype and climate only; feed-limited production, which is limited by feed quantity and quality; and actual production. The difference between the potential or limited production and the actual production is the yield gap. The objective of this paper, the first in a series of three, is to present a mechanistic, dynamic model simulating potential and feed-limited production for beef cattle, which can be used to assess yield gaps. A novelty of this model, named LiGAPS-Beef (Livestock simulator for Generic analysis of Animal Production Systems – Beef cattle), is the identification of the defining factors (genotype and climate) and limiting factors (feed quality and available feed quantity) for cattle growth by integrating sub-models on thermoregulation, feed intake and digestion, and energy and protein utilisation. Growth of beef cattle is simulated at the animal and herd level. The model is designed to be applicable to different beef production systems across the world. Main model inputs are breed-specific parameters, daily weather data, information about housing, and data on feed quality and quantity. Main model outputs are live weight gain, feed intake and feed efficiency (FE) at the animal and herd level. Here, the model is presented, and its use is illustrated for Charolais and Brahman × Shorthorn cattle in France and Australia. Potential and feed-limited production were assessed successfully, and we show that FE of herds is highest for breeds most adapted to the local climate conditions. LiGAPS-Beef also identified the factors that define and limit growth and production of cattle. Hence, we argue the model has scope to be used as a tool for the assessment and analysis of yield gaps in beef production systems.     

Variation of Pleurotus ostreatus (Jacq. Ex Fr.) P. Kumm. (1871) performance subjected to differentdoses and timings of nano-urea

Supplementation of the growing substrate by nitrogenous additives has been known to improve the production of oyster mushroom (Pleurotus ostreatus (Jacq. ex Fr.) P. Kumm. (1871)). However, the application of nano-additives has not been reported in such cultivation yet. The study investigated the effect of nano-urea added in two different doses (3 g and 5 g per kg substrate), once (at spawning or after first flush) or twice (at spawning and after first flush) to the growing substrate consisting of wheat straw and spent oyster substrate (1:1, w/w). Results showed that the application of nano-urea once has induced the highest number of mushroom flushes (four flushes) despite the dose applied. Contrarily to early findings, where high doses of nitrogen have caused inhibition of mushroom growth and production, nano-urea application has had better effects when applied twice. With 5 g/kg, it induced the shortest period between the first and the third flush (15 days). With 3 g/kg, it resulted in the highest biological and economic yields at the third flush (332.7 g/bag and 283.1 g/bag respectively), in total (973.4 g/bag and 854.0 g/bag respectively), the highest biological efficiency (109.6%), and pileus diameter/stipe length ratio (2.8). Experimental findings of the current study may be potentially applied at commercial scale.     

EFFECTS OF ARSENATE ON GROWTH OF NITROGEN-AND PHOSPHORUS-LIMITED CHLORELLA VULGARIS (CHLOROPHYCEAE) ISOLATES1

The effects of arsenate on the growth characteristics of five isolates of the freshwater alga, Chlorella vulgaris Beij., were examined. Two field isolates originated from arsenic-contaminated sites in Yukon, Canada and Kyushi, Japan; two reference isolates were obtained from the University of Texas Culture Collection. One isolate was selected for arsenic-tolerance in the laboratory. All five strains survived in culture solutions containing high arsenate concentrations. Arsenate (1–25 mM As) reduced photosynthesis and cell growth, as reflected by induced lag periods, slower growth rates, and lower stationary cell yields. Field isolates had shorter lag periods, higher growth rates, and enhanced cell yields compared to lab isolates when exposed to the same arsenic concentrations. Growth of the phosphorus-limited field strains was stimulated by the addition of arsenic. The cell yield of phosphorus-limited C. vulgaris Yukon, when treated with arsenic, was two times that of the phosphorus-limited control. This pattern was not evident when photosynthesis was used as a measure of cell response.     

Instrumental test to estimate a model of forecast yield: a non-parametric application to the pollen index in South Italy

A statistical test is described to verify the characteristics of the biological information contained in the dynamics of the flowering process. The test focuses on interactions between the pollen index and climatic variables to investigate if the biological indicator can synthesise the information of the pre-flowering phases. The multiple-regression model is built upon two pre-flowering climate macro-indicators extracted by Principal Component Analysis (PCA) and the optimised pollen index is obtained by non-parametric estimation. The empirical analysis is applied to 15 stations located in southern Italy in regions that have a longstanding tradition of olive production. Using the variance explained, we find that an optimised pollen index is fairly well predicted by the pre-flowering climatic data. We conclude that the optimised pollen index makes more parsimonious the modelling for predicting olive production.     

Empirical relationships to estimate asymptotic length, length at first maturity and length at maximum yield per recruit in fishes, with a simple method to evaluate length frequency data

Empirical relationships are presented to estimate in fishes, asymptotic length (L∞) from maximum observed length (L_max), length at first maturity (L_m) from L_∞, life span (t_max) from age at first maturity (t_m), and length at maximum possible yield per recruit (L_opt) from L_∞ and from L_m, respectively. The age at L_opt is found to be a good indicator of generation time in fishes. A spreadsheet containing the various equations can be downloaded from the Internet at http://www.fishbase.org/download as popdynJFB.zip. A simple method is presented for evaluation of length–frequency data in their relationship to L_∞, L_m and L_opt. This can be used to evaluate the quality of the length–frequency sample and the status of the population. Three examples demonstrate the usefulness of this method. 2000 The Fisheries Society of the British Isles     

Effect of gibberellic acid on pod set in soybean

Field-grown soybean plants (Glycine max (L.) Merr. cv. Evans) were treated with gibberellic acid (GA₃; 10gl^–1) and/or (2-chloroethyl)-trimethylammonium chloride (CCC; 0.8gl^–1) in 1983 and 1984, and subsequent anthesis, pod set, seed size, seed number, and seed yield were determined at one node. The treatments were applied to five leaves in the center of each plant (typically leaves 7–11) and reproductive development at the node in the center of those leaves was monitored. Gibberellin A₃ applied Early (about 3d before anthesis of the first flower at the monitored node) had no effect on the number of flowers produced, but decreased the fraction of flowers that set pods in both experimental years (by 32% in 1983 and 76% in 1984). Seed size was slightly decreased by the GA₃ treatment in 1983 but not in 1984. The Middle GA₃ treatment (applied about 3 days after the Early treatment) slightly decreased the number of pods set; and Late treatments (9 days after) had no effect. None of the monitored parameters were affected by CCC.The Early experiments were repeated with two additional genotypes, Lincoln and T210. Genotype T210 is a single-gene, dwarf mutant of Lincoln whose stem elongation and leaf expansion are insensitive to GA₃. Gibberellin A₃ affected the reproductive parameters in Lincoln very similarly to Evans but those in T210 were unaffected. This indicates that GA₃ exerts its effect by increasing the mass of vegetative tissue and thus diverting assimilates away from the pods. However, since the mutation in T210 might affect a receptor that is in flowers as well as shoots, it is possible that GA₃ exerted its effect on the normal genotypes directly on the developing pods, rather than indirectly by diverting photoassimilates.