Methods for rapid screening and isolation of bacteria producing acidic lipase: feasibility studies and novel activity assay protocols

Acidic lipase finds its commercial values in medical applications and bioremediation of food wastes. In this work, approaches for rapid screening of lipase-producing bacteria were developed and the feasibility assessment of the screening methods was performed. From food waste samples, the proposed screening procedures allowed isolation of sixteen pure bacterial strains expressing higher lipase activity at acidic pH (pH 6.0) than at alkaline pH (pH 9.0). To enhance the accuracy of lipase activity determination under acidic conditions, a novel assay procedure was also developed by deactivating lipase activity by microwave treatment prior to back titration. This additional step could minimize interferences arising from residual lipase activity during conventional direct back-titration methods in measuring lipase activity at acidic pH. Using the four strategies proposed in this work, the best acidic-lipase-producing isolate was obtained by strategy C (SSC) and was identified as Aeromonas sp. C14, displaying an optimal lipase activity of 0.7 U/ml at an acidic pH of 6.0.     

Optimization for xylanase and cellulase production from Aspergillus niger ATTC 6275 in palm oil mill wastes and its application

Optimization of enzyme production from Aspergillus niger ATCC 6275 under both submerged and solid-substrate cultivation was investigated. Results from submerged cultivation using palm oil mill effluent revealed that pretreatment of ground palm cake did not improve enzyme production. Addition of 0.60g NH4NO3/l generated maximum activity of xylanase and cellulase (CMCase). The optimum aeration rate was 1.2 v/v min. Under solid-substrate cultivation, the results indicated that heating and alkali treatment of the ground palm cake gave no further improvement in enzyme production. The optimal N-source was 2% urea. Optimal initial moisture contents for xylanase and CMCase activities were 60% and 50% respectively, with temperature optima of 30°C and 35°C, respectively. The optimal inoculum size was 1× 108 spores/g palm cake with an initial pH of 4.5–5.0. The maximum activities of xylanase (282.9U/g) and CMCase (23.8U/g) were obtained under the optimum conditions. Solid-substrate cultivation was a better method for the production of enzyme, particularly xylanase, from A. niger ATCC 6275. The application of these enzymes to decanter effluent showed the separation of oil and grease and suspended solids from the effluent. This is comparable to the result achieved from using the commercial xylase preparation Meicelase and superior to the effect of Sumyzyme.     

Applications of recombinant DNA technology to the pulp and paper industry

New gene selection techniques (Recombinant DNA) are currently available to exploit useful properties of various biological systems hitherto regarded as interesting but of little or no immediate commercial value. The application of genetic engineering techniques to problems in the Pulp and Paper Industry are many. As a first step these techniques are being used to provide much needed fundamental information on the cellular and molecular mechanisms involved in the expression of extra-cellular enzymes that degrade lignocellulosic pulping wastes. The information gleaned from the studies on cellulolytic fungi and bacteria can be used to genetically engineer a yeast or bacterium capable of converting pulping wastes into ethanol and other useful by-products.     

A new kumamolisin-like protease from Alicyclobacillus acidocaldarius: an enzyme active under extreme acidic conditions

A new serine-carboxyl proteinase, called kumamolisin-ac, was purified from the thermoacidophilic bacterium Alicyclobacillus acidocaldarius. The enzyme is a monomeric protein of 45?kDa, active over a wide temperature range (5.0–70°C) and extremely acidic pHs (1.0–4.0), showing maximal proteolytic activity at pH?2.0 and 60°C. Interestingly, kumamolisin-ac displayed a significant proteolytic activity even at 5°C, thus suggesting a sort of cold-adaptation for this enzyme. The protease was remarkably stable at high temperatures (t_1/2 at 80°C, 10?h, pH?2.0) and over a broad range of pH (2.0–7.0). Substrate analysis indicated that kumamolisin-ac was active on a variety of macromolecular substrates, such as haemoglobin, hide powder azure, and azocoll. In particular, a high specific activity was detected towards collagen. The corresponding gene was cloned, expressed and the recombinant protease, was found to be homologous to proteases of the ‘S53’ family. From the high identity with kumamolisin and kumamolisin-As, known as collagenolytic proteases, kumamolisin-ac can be considered as the third collagenolytic affiliate within the ‘S53’ family. Cleavage specificity investigation of kumamolisin-ac revealed a unique primary cleavage site in bovine insulin B-chain, whereas a broad specificity was detected using bovine α-globin as substrate. Thus, kumamolisin-ac could represent an attractive candidate for industrial-scale biopeptide production under thermoacidophilic conditions.     

High production of cold-tolerant chitinases on shrimp wastes in bench-top bioreactor by the Antarctic fungus Lecanicillium muscarium CCFEE 5003: Bioprocess optimization and characterization of two main enzymes

The Antarctic fungus Lecanicillium muscarium CCFEE-5003 was preliminary cultivated in shaken flasks to check its chitinase production on rough shrimp and crab wastes. Production on shrimp shells was much higher than that on crab shells (104.6 ± 9.3 and 48.6 ± 3.1 U/L, respectively). For possible industrial applications, bioprocess optimization was studied on shrimp shells in bioreactor using RSM to state best conditions of pH and substrate concentration. Optimization improved the production by 137% (243.6 ± 17.3). Two chitinolytic enzymes (CHI1 and CHI2) were purified and characterized. CHI1 (MW ca. 61 kDa) showed optima at pH 5.5 and 45 °C while CHI2 (MW ca. 25 kDa) optima were at pH 4.5 and 40 °C. Both enzymes maintained high activity levels at 5 °C and were inhibited by Fe⁺⁺, Hg⁺⁺ and Cu⁺⁺. CHI2 was strongly allosamidin-sensitive. Both proteins were N-acetyl-hexosaminidases (E.C. 3.2.1.52) but showed different roles in chitin hydrolysis: CHI1 could be defined as “chitobiase” while CHI2 revealed a main “eso-chitinase” activity.     

Phytomass change in natural phytocenosis as an indicator of technogenic pollution of soils with heavy metals

This study considered the possibility of using plant community phytomass for the assessment of soil pollution with heavy metals (HM) from industrial wastes. The three-year-long field experiment was run under the regional natural meadow vegetation; the polymetallic galvanic slime was used as an industrial waste contaminant. It is shown that soil contamination primarily causes decrease of phytomass in the growing phytocenosis. The vegetation experiments determined nonlinear dependence of cultivated and wild plant biomass on the level of soil contamination; it is described by the equations of logistic and Gaussian regression. In the absence of permanent contaminants, the soil is self-cleaned over time. It reproduces phytomass mainly due to the productivity increase of the most pollution-tolerant species in the remaining phytocenosis. This phenomenon is defined as environmental hysteresis. Soil pollution by industrial waste leads to the loss of plant biodiversity. The research shows that the study of the HM impact on ecosystems is expedient given the consideration of the “soil–phytocenosis–pollutant” complex in the “dose–response” aspect. The reaction of phytocenosis on HM showing decline in phytomass leads to serious limitations in the choice of accumulating plants, because the adsorbed HM are rejected through phytomass.     

农林废弃物混配基质的理化性质及其对油茶幼苗生长效应的综合评价

以腐熟的甘蔗渣( SB)、木薯皮( CP)、花生壳( PS)和火炭灰( BA)及园土( GS)为原料,按照不同体积比配制成9种混配基质,并以等体积比泥炭和园土混配基质为对照,对各基质的理化性质及基质中油茶( Camellia oleifera Abel)幼苗的生长状况进行比较;在对基质理化指标和油茶幼苗的壮苗指数进行线性回归分析和通径分析的基础上,采用主成分分析和综合评价法对各基质的育苗效果进行综合评价。结果表明：9种农林废弃物混配基质的容重、总孔隙度和毛管孔隙度分别为0.23~0.47 g·cm-3、60.90%~67.23%和46.53%~58.27%, pH 6.72~pH 7.14,各基质的速效氮含量、速效磷含量、速效钾含量、pH值、电导率和通气孔隙度均高于或显著高于对照,容重则显著低于对照。在不同基质中油茶幼苗的茎粗、单株叶片数、叶长、叶宽、叶绿素相对含量( SPAD)、单株茎叶干质量、单株根干质量和壮苗指数均存在一定差异,而株高和根冠比却无显著差异;其中S9混配基质也V( SB)：V( CP)：V( BA)=2：1：1页中幼苗的大部分生长指标较高,表现出明显的生长优势。线性回归和通径分析结果显示：除通气孔隙度外,基质的其他8个理化指标基本涵盖了影响幼苗壮苗指数的关键因素;其中,速效钾含量是对壮苗指数直接影响最大的负相关因子,而速效磷含量、电导率和总孔隙度对壮苗指数则有较大的正向直接作用,并且三者通过速效钾含量对壮苗指数产生较大的负向间接作用;此外,基质容重对壮苗指数也有一定的负向直接作用。综合评价结果显示：S9和S7混配基质也V( SB)：V( BA)：V( GS)=4：3：3页对油茶育苗效果的综合得分较高,分别为14.363和14.337,建议将S9混配基质作为油茶育苗的首选替代基质,S7混配基质作为备选基质。     

Pullulan production from brewery wastes by Aureobasidium pullulans

The production of pullulan from brewery wastes by Aureobasidium pullulans in shake flask culture was investigated. The maximum pullulan concentration (6.0g/l) was obtained after 72h of fermentation. The external addition of nutrients into the spent grain liquor improved significantly the production of pullulan. In this case, the highest values of pullulan concentration (11.0±0.5g/l), pullulan yield (48.2±1.5%), and sugar utilization (99.0±0.5%) were obtained in the medium (pH 6.5–7.5) supplemented with K₂HPO₄ 0.5%, l-glutamic acid 1%, olive oil 2.5%, and Tween 800.5%.     

Lead biosorption by waste biomass of Corynebacterium glutamicum generated from lysine fermentation process

Biomass waste, mainly Corynebacterium glutamicum, is generated from large-scale lysine fermentation process. In this study, protonated C. glutamicum biomass was evaluated as a biosorbent for the removal of lead from synthetic wastewater. As Pb2+ were bound to the biomass, the solution pH deceased, indicating that protons in the biomass were exchanged with lead ions. The Corynebacterium biomass bound Pb2+ at up to 2.74 mmol g(-1) at pH 5, where lead does not precipitate. Compared with other biosorbents and conventional sorbents, such as natural zeolite, activated carbon and synthetic ion exchange resin, the protonated C. glutamicum biomass was considered to be a useful biomaterial for lead biosorption.     

Simulation on long-term operation of an anaerobic bioreactor for Korean food wastes

A mathematical model was formulated to simulate the long-term performance of an anaerobic bioreactor designed to digest Korean food wastes. The system variables of various decomposition steps were built into the model, which predicts the temporal characters of solid waste, and volatile fatty acid (VFA) in the reactor, and gas production in response to various input loadings and temperatures. The predicted values of VFA and gas production were found to be in good agreement with experimental observations in batch and repeated-input systems. Finally, long-term reactor performance was simulated with respect to the seasonal temperature changes from 5°C in winter to 25°C in summer at different food waste input loadings. The simulation results provided us with information concerning the success or failure of a process during long-term operation.