Absolute configuration and conformation of the pure opioid antagonist (+)-2,9 alpha-dimethyl-5-(m-hydroxyphenyl)morphan.

(+)-2,9 alpha-Dimethyl-5-(m-hydroxyphenyl)morphan is the only phenylmorphan analog whose affinity for opioid kappa-receptors is greater than its affinity for opioid mu-receptors. Pharmacologically, the compound is a pure opioid antagonist devoid of agonist activity in in vivo assays of antinociception. The absolute configuration of the compound has been determined to be (1R,5S,9R) from an X-ray crystallographic study of the chloride salt. Thus, the absolute configuration corresponds to that of the atypical opioid agonist (-)-phenylmorphan while the weak atypical agonist (-)-2,9 alpha-dimethyl-5-(m- hydroxyphenyl)morphan corresponds to the potent morphine-like (+)-phenylmorphan. The preferred orientations of the phenyl ring for the two stereoisomers were determined using the molecular mechanics program MM2-87 and found to vary from that of the two parent compounds. The atypical properties of the two 9 alpha-methyl analogs is consistent with an opioid ligand model which proposes that morphine-like properties require a particular range of phenyl orientations. There was good agreement between the structure obtained from X-ray crystallography and computed with the MM2-87 program.     

Crosslinked elastic fibers are necessary for low energy loss in the ascending aorta

In the large arteries, it is believed that elastin provides the resistance to stretch at low pressure, while collagen provides the resistance to stretch at high pressure. It is also thought that elastin is responsible for the low energy loss observed with cyclic loading. These tenets are supported through experiments that alter component amounts through protease digestion, vessel remodeling, normal growth, or in different artery types. Genetic engineering provides the opportunity to revisit these tenets through the loss of expression of specific wall components. We used newborn mice lacking elastin (Eln^−/−) or two key proteins (lysyl oxidase, Lox^−/−, or fibulin-4, Fbln4^−/−) that are necessary for the assembly of mechanically-functional elastic fibers to investigate the contributions of elastic fibers to large artery mechanics. We determined component content and organization and quantified the nonlinear and viscoelastic mechanical behavior of Eln^−/−, Lox^−/−, and Fbln4^−/− ascending aorta and their respective controls. We confirmed that the lack of elastin, fibulin-4, or lysyl oxidase leads to absent or highly fragmented elastic fibers in the aortic wall and a 56–97% decrease in crosslinked elastin amounts. We found that the resistance to stretch at low pressure is decreased only in Eln^−/− aorta, confirming the role of elastin in the nonlinear mechanical behavior of the aortic wall. Dissipated energy with cyclic loading and unloading is increased 53–387% in Eln^−/−, Lox^−/−, and Fbln4^−/− aorta, indicating that not only elastin, but properly assembled and crosslinked elastic fibers, are necessary for low energy loss in the aorta.     

Simulation of protein misfolding using a lattice model

The structure of the tightly bound complex of the globular myosin head with F-actin is the key to understanding important details of the mechanism of how the actin-myosin motor functions. The current notion on this complex is based on the docking of known atomic structures of constituent proteins into low-resolution electron-density maps. The atomic structure of the complex was refined by the molecular mechanics method, which consists in minimizing the energy of molecular interaction and which makes it possible to optimize not only the relative position of protein backbones as rigid bodies, but also the position of side chains on the protein interface. The structure calculated using ICM-Pro software, on the one hand, is close to the model obtained using electron microscopy; on the other hand, it ensures the best calculated interaction energy and accounts for the results of mutagenesis experiments. On the basis of the structure obtained, we can suggest the molecular mechanisms underlying the actin-activated release of ATP hydrolysis products from myosin and the decrease in the affinity of myosin for actin upon binding of nucleotides.     

Dietary boron does not affect tooth strength,micro-hardness,and density,but affects tooth mineral composition and alveolar bone mineral density in rabbits fed a high-energy diet

The objective of this study was to determine whether dietary boron (B) affects the strength, density and mineral composition of teeth and mineral density of alveolar bone in rabbits with apparent obesity induced by a high-energy diet. Sixty female, 8-month-old, New Zealand rabbits were randomly assigned for 7 months into five groups as follows: (1) control 1, fed alfalfa hay only (5.91 MJ/kg and 57.5 mg B/kg); (2) control 2, high energy diet (11.76 MJ and 3.88 mg B/kg); (3) B10, high energy diet + 10 mg B gavage/kg body weight/96 h; (4) B30, high energy diet + 30 mg B gavage/kg body weight/96 h; (5) B50, high energy diet + 50 mg B gavage/kg body weight/96 h. Maxillary incisor teeth of the rabbits were evaluated for compression strength, mineral composition, and micro-hardness. Enamel, dentin, cementum and pulp tissue were examined histologically. Mineral densities of the incisor teeth and surrounding alveolar bone were determined by using micro-CT. When compared to controls, the different boron treatments did not significantly affect compression strength, and micro-hardness of the teeth, although the B content of teeth increased in a dose-dependent manner. Compared to control 1, B50 teeth had decreased phosphorus (P) concentrations. Histological examination revealed that teeth structure (shape and thickness of the enamel, dentin, cementum and pulp) was similar in the B-treated and control rabbits. Micro CT evaluation revealed greater alveolar bone mineral density in B10 and B30 groups than in controls. Alveolar bone density of the B50 group was not different than the controls. Although the B treatments did not affect teeth structure, strength, mineral density and micro-hardness, increasing B intake altered the mineral composition of teeth, and, in moderate amounts, had beneficial effects on surrounding alveolar bone.     

Localization of99mTc in bone by means of autoradiography

The uptake of two different preparations of^99mTechnetium-methylene diphosphonate in fetal rat calvaria is compared. The localization of^99mTc after administration of^99mTc(Sn)-MDP and^99mTc-MDP showed equal distribution in autoradiography.     

Ankle and knee moment and power adaptations are elicited through load carriage conditioning in males

Soldiers routinely conduct load carriage and physical training to meet occupational requirements. These tasks are physically arduous and are believed to be the primary cause of musculoskeletal injury. Physical training can help mitigate injury risk when specifically designed to address injury mechanisms and meet task demands. This study aimed to assess lower-limb biomechanics and neuromuscular adaptations during load carriage walking in response to a 10-week evidence-based physical training program. Thirteen male civilian participants donned 23 kg and completed 5 km of load carriage treadmill walking, at 5.5 km h⁻¹ before and after a 10-week physical training program. Three-dimensional motion capture and force plate data were acquired in over-ground walking trials before and after treadmill walking. These data were inputs to a musculoskeletal model which estimated lower-limb joint kinematics and kinetics (i.e., moments and powers) using inverse kinematics and dynamics, respectively. A two-way analysis of variance revealed significant main effect of training for kinematic and kinetics parameters at the knee and ankle joints (p < 0.05). Post-Hoc comparisons demonstrated a significant decrease (4.2%) in total negative knee power between pre- and post-March 5 km measures after training (p < 0.05). Positive power contribution shifted distally after training, increasing at the post-march measure from 39.9% to 43.6% at the ankle joint (p < 0.05). These findings demonstrate that a periodised training program may reduce injury risk through favourable ankle and knee joint adaptations.     

Extracellular vesicles in bone and tooth: A state-of-art paradigm in skeletal regeneration

Bone and tooth, fundamental parts of the craniofacial skeleton, are anatomically and developmentally interconnected structures. Notably, pathological processes in these tissues underwent together and progressed in multilevels. Extracellular vesicles (EVs) are cell-released small organelles and transfer proteins and genetic information into cells and tissues. Although EVs have been identified in bone and tooth, particularly EVs have been identified in the bone formation and resorption, the concrete roles of EVs in bone and tooth development and diseases remain elusive. As such, we review the recent progress of EVs in bone and tooth to highlight the novel findings of EVs in cellular communication, tissue homeostasis, and interventions. This will enhance our comprehension on the skeletal biology and shed new light on the modulation of skeletal disorders and the potential of genetic treatment.     

Bone Cell-autonomous Contribution of Type 2 Cannabinoid Receptor to Breast Cancer-induced Osteolysis

The cannabinoid type 2 receptor (CB2) has previously been implicated as a regulator of tumor growth, bone remodeling, and bone pain. However, very little is known about the role of the skeletal CB2 receptor in the regulation of osteoblasts and osteoclasts changes associated with breast cancer. Here we found that the CB2-selective agonists HU308 and JWH133 reduced the viability of a variety of parental and bone-tropic human and mouse breast cancer cells at high micromolar concentrations. Under conditions in which these ligands are used at the nanomolar range, HU308 and JWH133 enhanced human and mouse breast cancer cell-induced osteoclastogenesis and exacerbated osteolysis, and these effects were attenuated in cultures obtained from CB2-deficient mice or in the presence of a CB2 receptor blocker. HU308 and JWH133 had no effects on osteoblast growth or differentiation in the presence of conditioned medium from breast cancer cells, but under these circumstances both agents enhanced parathyroid hormone-induced osteoblast differentiation and the ability to support osteoclast formation. Mechanistic studies in osteoclast precursors and osteoblasts showed that JWH133 and HU308 induced PI3K/AKT activity in a CB2-dependent manner, and these effects were enhanced in the presence of osteolytic and osteoblastic factors such as RANKL (receptor activator of NFκB ligand) and parathyroid hormone. When combined with published work, these findings suggest that breast cancer and bone cells exhibit differential responses to treatment with CB2 ligands depending upon cell type and concentration used. We, therefore, conclude that both CB2-selective activation and antagonism have potential efficacy in cancer-associated bone disease, but further studies are warranted and ongoing.     

A Thionin Stain for Visualizing Bone Cells, Mineralizing Fronts and Cement Lines in Undecalcified Bone Sections

A staining method is described using thionin, for undecalcified deacrylated bone sections. RNA is stained purplish violet, allowing still active osteoblasts to be distinguished from lining cells. Staining intensity of mineralized bone is related to the degree of mineralization. Mineralizing fronts and cement lines are visualized clearly. Lamellae show an alternate pattern. Histomorphometric parameters such as osteon thickness and interstitial bone thickness can be measured without using polarized light. The mineralizing front can be assessed and expressed as a percentage of the osteoblast-covered interface between osteoid and mineralized bone. The stain is also useful for qualitative assessment of metabolic bone disease. Thionin stained sections can be kept for at least one year when stored hi the dark at 7 C.