利用酵母菌生产有机酸的研究进展

有机酸是含有一种或多种低分子量酸性基团(如羧基、磺酸基)的可生物合成的有机化合物,广泛应用于食品、农业、医药、生物基材料工业等领域。酵母菌具有生物安全、抗逆性强、底物谱广泛、方便遗传改造,以及大规模培养技术成熟等独特优点,因此利用酵母菌生产有机酸的研究日益受到国内外学者的关注。目前利用酵母生产有机酸还存在浓度低、副产物多,以及发酵效率低等缺陷。随着酵母菌代谢工程和合成生物学技术的发展,利用酵母菌生产有机酸取得了快速进展。本文总结了利用酵母合成11种有机酸的研究,包括内源和异源合成的大宗羧酸和高价值有机酸,并对该领域的未来研究方向进行了展望。     

Hepatocyte culture on biodegradable polymeric substrates

The interactions of primary rat liver cells with biodegradable polymeric substrates were investigated in vitro to assess the suitability of the polymer materials for use in cell transplantation devices. The kinetics of cell adhesion to, and the growth and biochemical function of cells maintained on, films formed from poly (D,L-lactic-co-glycolic acid, 88: 12) (PLGA) or from a 50/50 (w/w) blend of PLGA and poly (L-lactic acid) (PLLA) were evaluated in comparison to two control substrates, matrigel coated or collagen-coated polystyrene petri dishes. The rate of cell adhesion to both types of polymeric substrates was similar to the rate of adhesion to the collagen control substrate, but of the two polymers, only the blend was suitable for extended culture. Hepatocytes maintained on the polymer blend films showed retention of differentiated cell function as measured by the rate of albumin secretion-the rate of albumin secretion by cells on the films was the same as the rate for cells on matrigel and reached a level in the range of reported in vivo levels (140-160 mug/10(6) cells/24 h). In contrast, albumin secretion by hepatocytes maintained on collagen-coated polystyrene culture dishes declined over five days to a level one third that of the initial level and one fifth that of cells maintained on the polymer blend films on day five. Such retention of differentiated cell function by hepatocytes in culture has previously been observed only when hepatocytes were cultured in the presence of exogenous extracellular matrix proteins or were cocultured with another cell type. In addition to retention of differentiated function, the cells maintained on the polymer blend films also displayed rates of DNA synthesis similar to controls maintained on collagen-coated polystyrene, a substrate optimal for DNA synthesis.     

Thermophilic microbial degradation of polyethylene succinate

This paper examined the biodegradability of a new aliphatic polyester, polyethylene succinate (PES), at a high incubation temperature of 50°C. The distribution and population of total colonies and of PES degrading micro organisms on polymer-emulsified agar plates were determined using the plate count and clear zone methods. The PES-decomposers were present in six of 10 soil samples and the total number ranged from 2.0×104 to 2.2×106 c.f.u./g of samples. Degrading microorganisms constituted between 20 and 80% of the total colonies on PES–agar plates. A single PES-degrading strain, TT96, was isolated and tested for its biodegrading capacity on PES powder and on other aliphatic polyesters: poly(beta-hydroxybutyrate) (PHB), polycaprolactone (PCL), poly(butylene succinate) (PBS), and poly(L-lactide) (PLA). Degraded films of PES and PBS were presented and compared using scanning electron microscopy. Strain TT96 was able to create clear zones on all the polymers used, except on PHB-agar plates. Liquid culture test after 2 weeks showed that TT96 completely degraded PCL powder but had very little activity on other samples. Scanning electron micrograph confirmed the microbial attack of TT96 on PES and PBS films. PES film surfaces were degraded more uniformly compared to PBS films which were decomposed only in some parts.     

Functionalization of cellulose acetate fibers with engineered cutinases

In the present work, we describe for the first time the specific role of cutinase on surface modification of cellulose acetate fibers. Cutinase exhibits acetyl esterase activity on diacetate and triacetate of 0.010 U and 0.007 U, respectively. An increase on the hydroxyl groups at the fiber surface of 25% for diacetate and 317% for triacetate, after a 24 h treatment, is estimated by an indirect assay. Aiming at further improvement of cutinase affinity toward cellulose acetate, chimeric cutinases are genetically engineered by fusing the 3′‐end coding sequence with a bacterial or a fungal carbohydrate‐binding module and varying the linker DNA sequence. A comparative analysis of these genetic constructions is presented showing that, the superficial regeneration of cellulose hydrophilicity and reactivity on highly substituted cellulose acetates is achieved by chimeric cutinases. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

可降解塑料的微生物降解研究进展

塑料材料的广泛使用给环境带了巨大的污染和处理压力,使用可降解塑料替代传统塑料是解决这一问题的重要途径。可降解塑料的生物降解是由相应的微生物和降解酶来完成的。综述了目前常见的生物降解塑料的微生物降解研究和进展情况,明确了微生物在可降解塑料生物降解中的重要性。     

Getting the right stuff： controlling neural stem cell state and fate in vivo and in vitro with biomaterials

Stem cell therapy holds great promises in medical treatment by, e.g., replacing lost cells, re-constitute healthy cell populations and also in the use of stem cells as vehicles for factor and gene delivery. Embryonic stem cells have rightfully attracted a large interest due to their proven capacity of differentiating into any cell type in the embryo in vivo. Tissue-specific stem ceils are however already in use in medical practice, and recently the first systematic medical trials involving human neural stem cell （NSC） therapy have been launched. There are yet many obstacles to overcome and procedures to improve. To ensure progress in the medical use of stem cells increased basic knowledge of the molecular mechanisms that govern stem cell characteristics is necessary. Here we provide a review of the literature on NSCs in various aspects of cell therapy, with the main focus on the potential of using biomaterials to control NSC characteristics, differentiation, and delivery. We summarize results from studies on the characteristics of endogenous and transplanted NSCs in rodent models of neurological and cancer diseases, and highlight recent advancements in polymer compatibility and applicability in regulating NSC state and fate. We suggest that the development of specially designed polymers, such as hydrogels, is a crucial issue to improve the outcome of stem cell therapy in the central nervous system.     

Combining a bio-based polymer and a natural antifoulant into an eco-friendly antifouling coating

Abstract

Biodegradable polymers are promising binders and carriers for natural antifoulants. In the present study, an antifouling (AF) coating was developed by adding a non-toxic AF compound (butenolide) to a bio-based and biodegradable poly(lactic acid)-based polyurethane. Mass loss measurement showed that the polymer degraded in seawater at a rate of 0.013?mg cm^?2?day^?1. Measurements showed that butenolide was released from the coatings into seawater over a period of at least three months. Both the concentration of butenolide in the coatings and the ambient temperature determined the release rate of butenolide. The results further demonstrate that incorporating rosin into the coatings increase the self-renewal rate of the polymer and facilitated the long-term release of butenolide from the coating. The results show that poly(lactic acid)-based polyurethane is a suitable polymer for butenolide-based AF coatings.     

Film forming microbial biopolymers for commercial applications—A review

Abstract

Microorganisms synthesize intracellular, structural and extracellular polymers also referred to as biopolymers for their function and survival. These biopolymers play specific roles as energy reserve materials, protective agents, aid in cell functioning, the establishment of symbiosis, osmotic adaptation and support the microbial genera to function, adapt, multiply and survive efficiently under changing environmental conditions. Viscosifying, gelling and film forming properties of these have been exploited for specific significant applications in food and allied industries. Intensive research activities and recent achievements in relevant and important research fields of global interest regarding film forming microbial biopolymers is the subject of this review. Microbial polymers such as pullulan, kefiran, bacterial cellulose (BC), gellan and levan are placed under the category of exopolysaccharides (EPS) and have several other functional properties including film formation, which can be used for various applications in food and allied industries. In addition to EPS, innumerable bacterial genera are found to synthesis carbon energy reserves in their cells known as polyhydroxyalkanoates (PHAs), microbial polyesters, which can be extruded into films with excellent moisture and oxygen barrier properties. Blow moldable biopolymers like PHA along with polylactic acid (PLA) synthesized chemically in vitro using lactic acid (LA), which is produced by LA bacteria through fermentation, are projected as biodegradable polymers of the future for packaging applications. Designing and creating of new property based on requirements through controlled synthesis can lead to improvement in properties of existing polysaccharides and create novel biopolymers of great commercial interest and value for wider applications. Incorporation of antimicrobials such as bacteriocins or silver and copper nanoparticles can enhance the functionality of polymer films especially in food packaging applications either in the form of coatings or wrappings. Use of EPS in combinations to obtain desired properties can be evaluated to increase the application range. Controlled release of active compounds, bioactive protection and resistance to water can be investigated while developing new technologies to improve the film properties of active packaging and coatings. An holistic approach may be adopted in developing an economical and biodegradable packaging material with acceptable properties. An interdisciplinary approach with new innovations can lead to the development of new composites of these biopolymers to enhance the application range. This current review focuses on linking and consolidation of recent research activities on the production and applications of film forming microbial polymers like EPS, PHA and PLA for commercial applications.     

Fibronectin and culture temperature modulate the efficacy of an avidin-biotin binding system for chondrocyte adhesion and growth on biodegradable polymers

Cell adhesion to a scaffold is a prerequisite for tissue engineering. Many studies have been focused on enhancing cell adhesion to synthetic materials that are used for scaffold fabrication. Previously, we showed that immobilization of biotin molecules to chondrocyte surfaces enhanced cell adhesion to avidin-coated biodegradable polymers such as poly-L-lactic acid, poly-D,L-lactic acid and polycaprolactone. However, the endocytosis of cell membrane biotin molecules decreases binding strength between biotinylated-chondrocytes (B-chondrocytes) and avidin-coated substrata, and therefore decreases cell spreading and discourages long-term chondrocytes culture. In this study, we proposed two strategies to solve the shortcoming of the avidin-biotin binding system. First, the avidin-biotin binding system is combined with the intrinsic integrin-dependent adhesion systems in order to enhance long-term cell culture. Second, the incubation temperature is lowered in order to slow down the endocytosis process. We found that the avidin-biotin binding system in combination with FN-integrin binding system enhanced cell adhesion, cell spreading and cell growth. Decrease of cell culture temperature to 4 degrees C enhanced the adhesion of B-chondrocytes to the avidin-coated surfaces, but decreased cell viability and proliferation, compared to culture temperature of 37 degrees C. Whether there is an optimal seeding temperature between 4 and 37 degrees C for both adhesion and proliferation of B-chondrocytes needs further investigation. Our results indicated that modulation of the adhesion conditions could further enhance the efficacy of the avidin-biotin binding system in mediating cell adhesion, and subsequent tissue culture.