Glycogen Metabolism in Aureobasidium Pullulans: A Glycogen Synthetase with Unusual Activation Properties

Abstract

Cultures of filamentous fungi that secrete significant amounts of exopolysaccharides are among the most difficult of fermentation fluids, presenting difficulties in the areas of aeration, agitation, mixing, and control that may in turn impact the physiology of the microorganism in an undesirable manner. The fungus Sclerotium glucanicum, which produces a potentially useful exopolysaccharide known as scleroglucan, illustrates many such difficulties. This review discusses in detail the range of physiological studies on the producing microorganism itself, including those concerning formation of “undesirable” byproducts, principally oxalate, but also, under certain conditions, other TCA cycle acids. In addition, the bioreactor technology in use for production of this type of biopolymer is discussed in relation to the difficulties such fluid types present. The potential of pneumatically agitated reactors for such production is evaluated, and the lack of fundamental studies on such reactors and on the hydrodynamics and mixing behavior of such complex fluids is pointed out.     

Automated Food-Procuring Movement-Related Neuronal Activity in the Basolateral Amygdala of the Rat

We studied the impulse activity of neurons of the basal and lateral amygdalar nuclei generated when experimental animals (rats) performed fast stereotyped food-procuring movements by the forelimb. Within the basolateral amygdala, there are neurons whose activity is related to different stages of getting off the food, and according to the characteristics of their spiking these neurons should be divided into a number of subpopulations. Activation forestalling the movement initiation by 0.5-1.0 sec was observed in most neurons of the basolateral amygdala; this is considered a manifestation of excitation related to a motivation component of the food-procuring behavior. Activation of amygdalar neurons following movement initiation can result from generation in this structure of additional excitation necessary for successful performance of a complete food-procuring motor cycle.     

An automated technique for monitoring carbon dioxide respired by insects*

ABSTRACT. A non-dispersive infrared gas analyser equipped with a Luft-type sonic detector and flow-through reference cell was automated to monitor the total volume of carbon dioxide (CO₂) respired by single insects or groups of insects. The infrared analyser was interfaced with an integrator for quantification, a microprocessor to control intermittent air flow through the insect respiration chambers, and a microcomputer for data storage and reduction. This technique has been used to monitor the CO₂ Output of diapausing and non-diapausing mature fifth instar larvae and of developing pupae of the codling moth, Cydia pomonella (L.) (Lepidoptera: Tortricidae). The resulting data were accurate, quantitative and reproducible.     

Anwendung der automatisierten Festphasenextraktion bei der Bestimmung von Ochratoxin A

For some foodstuffs, determination of the mycotoxin ochratoxin A (OTA) requires time consuming clean up by means of solid phase extraction (SPE). Therefore a system for automated SPE was tested for cleaning up roasted coffee as a possible way of shortening preparation time. Validation of the method in accordance to the so called “Concept '98” led to a LOD of 0.2 μg/kg and a recovery rate of 92%. By using the described procedure with samples of roasted coffee the OTA contents varied between the LOD and 3.4 μg/kg. This method was also used to determine ochratoxin A in liquorice roots, ginger and valerian.

Presented at the 26^th Mykotoxin Workshop in Herrsching, Germany, May 17–19, 2004     

Selection and proliferation of rapid growing cell lines from embryo derived cell cultures of yew tree (Taxus cuspidata Sieb. et Zucc)

Calli were induced from 300,000 embryos isolated from immature to mature stage of seeds collected on late September from 14 elite trees. When the embryos were cultured onto plastic Petri-dish containing 20 mL of modified B5 basal medium supplemented with 3% (w/v) sucrose, 500 mg/L casein hydrolysate, 250 mg/L myo-inositol, 0.5% (w/v) polyvinyl polypyrrolidon (PVPP), 2×MS vitamins, 0.5 mg/L gibberellic acid, and 10 mg/L 2,4-D after 2 weeks of culture, yellowish-white calli were immediately formed on the surfaces of embryos, and subcultured for 4 weeks in same culture medium. Because most of calli maintained for more than 3 months were revealed differences in their colors, surface texture, and growth rate, visual selection was made for first round screening. When the size of visually selected calli larger than 19 mm in their diameter were inoculated, persistent proliferation was observed. Among the plating methods tested for the selection of rapid growing cell lines at single cell and/or small cell aggregate level, 2-layer spread plating revealed as the best for single cell cloning. To enhance cell growth and maintain high rate of viability for long-term culture of yew cells in bioreactor, final cell volume less than 50% in SCV seemed to be the best. Time course study revealed that 30% of inoculum density was suitable for fed batch culture. Among the tested conditional media, the rate of 1∶2 (old medium: fresh medium) was recorded at the best for cell growth.     

Permeable collagen-glycosaminoglycan cross-linked copolymers for the study of biological responses of coculturede Sertoli and spermatogenic cells

A novel collagen-glycosaminoglycan (C-GAG) substrate was developed to overcome the optical opacity of a HATF nitrocellulose substrate and to provide a more physiological permeable substrate for cocultured Sertoli and spermatogenic cells. Cocultures were prepared on optically transparent C-GAG discs attached to a polyester mesh to facilitate handling. Sertoli cells displayed a cuboidal-to-columnar shape; a large number of spermatogonia and primary spermatocytes connected by intercellular bridges were associated with basolateral and apical surfaces of Sertoli cells up to 12 days after plating. Rat Sertoli-spermatogenic cell cocultures have been used for testing the effect of toxicants on rat spermatogenesis in vitro. In our initial studies, we tested the effects of the toxicant gossypol on spermatogenic cells cocultured with Sertoli cells on nonpermeable (plastic) and permeable substrates (HATF nitrocellulose) under both standard culture conditions and during perifusion after achieving a continuous electrical-resistant cell monolayer. A selective mitochondrial structural damage was observed in spermatogenic cells (spermatogonia and spermatocytes) but not in the coexisting Sertoli cells. This damage was time- (15–60 min) and dose-dependent (0.1–10µM) and developed more rapidly under perifusion conditions. Similar mitochondrial damage was reported in the intact animal but required higher concentrations (mg) and longer administration time (months) for detection. Studies are in progress to evaluate the effect of additional toxic chemical agents on functional properties of Sertoli and spermatogenic cells in cocultures prepared on various classes of C-GAG substrates.Abbreviations C-GAG, collagen type I-glycosaminoglycans - C-C6S, collagen type I-chondroitin-6-sulfate - C-H, collagen type I-heparin     

The membrane dialysis bioreactor with integrated radial-flow fixed bed —a new approach for continuous cultivation of animal cells

A hybridoma cell was cultivated continuously in a membrane dialysis bioreactor with an integrated radial-flow fixed bed consisting of porous Siran^® carriers over a period of 6 weeks. Antibodies accumulated to an average of 100 mg l^?1, approx. 10 times more than in fixed bed cultures without dialysis membrane. Serum costs could be reduced about 85% due to an appropriate feeding strategy. Siran^® carriers with 3–5 mm diameter showed an advantage compared to those with 1–2 mm diameter. For the 3–5 mm carrier the specific glucose uptake rate and the MAb production rate were constant, if the velocity was between 0.09 mm s^?1 and 0.75 mm s^?1. At higher velocities cells are washed out of the bed. Furthermore antibody consistency and cell stability were verified in long-term cultivations over a period of 96 days. From an estimation of the antibody concentration reachable with the reactor concept under optimal conditions a concentration 45 times higher compared to axial-flow fixed bed reactors and 11 times higher compared to stirred tank reactors can be expected.     

Rhesus monkey (Macaca mulatta) complex learning skills reassessed

Results from three experiments on basic learning and transfer in rhesus monkeys (Macaca mulatta) are reported in which fully automated testing paradigms, afforded by the Language Research Center's Computerized Test System (LRC-CTS), were employed. Performance levels for discrimination learning set, transfer index, and mediational-learning testing were uniformly higher than was predicted from the literature, in contrast to previous reports of compromised learning under similar conditions (automated apparatus, planimetric stimuli, spatial discontiguity between stimuli and response loci). Analyses reveal relatively advanced learning set performance, transfer-index ratios, and positive transfer of learning even at stringent criterion levels. Moreover, the data suggest that rhesus monkeys tested in these experiments exhibit mediational instead of associative learning strategies, as do great apes and in contrast to previous reports of rhesus learning. We argue that the LRC-CTS enhances learning by nonhuman primate subjects, obviating those factors, reported in the literature from experiments in which manual or other automated systems were employed, that compromise learning.     

Automated carboxy-terminal sequence analysis of peptides.

Proteins and peptides can be sequenced from the carboxy-terminus with isothiocyanate reagents to produce amino acid thiohydantoin derivatives. Previous studies in our laboratory have focused on solution phase conditions for formation of the peptidylthiohydantoins with trimethylsilylisothiocyanate (TMS-ITC) and for hydrolysis of these peptidylthiohydantoins into an amino acid thiohydantoin derivative and a new shortened peptide capable of continued degradation (Bailey, J. M. & Shively, J. E., 1990, Biochemistry 29, 3145-3156). The current study is a continuation of this work and describes the construction of an instrument for automated C-terminal sequencing, the application of the thiocyanate chemistry to peptides covalently coupled to a novel polyethylene solid support (Shenoy, N. R., Bailey, J. M., & Shively, J. E., 1992, Protein Sci. I, 58-67), the use of sodium trimethylsilanolate as a novel reagent for the specific cleavage of the derivatized C-terminal amino acid, and the development of methodology to sequence through the difficult amino acid, aspartate. Automated programs are described for the C-terminal sequencing of peptides covalently attached to carboxylic acid-modified polyethylene. The chemistry involves activation with acetic anhydride, derivatization with TMS-ITC, and cleavage of the derivatized C-terminal amino acid with sodium trimethylsilanolate. The thiohydantoin amino acid is identified by on-line high performance liquid chromatography using a Phenomenex Ultracarb 5 ODS(30) column and a triethylamine/phosphoric acid buffer system containing pentanesulfonic acid. The generality of our automated C-terminal sequencing methodology was examined by sequencing model peptides containing all 20 of the common amino acids. All of the amino acids were found to sequence in high yield (90% or greater) except for asparagine and aspartate, which could be only partially removed, and proline, which was found not be capable of derivatization. In spite of these current limitations, the methodology should be a valuable new tool for the C-terminal sequence analysis of peptides.     

On-line monitoring of enzymes in downstream processing by flow injection analysis (FIA)

Flow injection analysis (FIA) has been employed to automate enzyme assays for formate dehydrogenase (FDH) and l-leucine dehydrogenase (l-LeuDH). Coupled to a special sampling device the FIA assays were used to monitor on-line downstream processes, e.g. disintegration of microbial cells and cross-flow filtration of cell homogenates.