Influence of concentration and structure of quaternary ammonium salts on their antifouling efficiency tested against a community of marine bacteria

With the view of incorporating quaternary ammonium salts (QAs) in marine paints, nineteen of these were tested against a community of marine bacteria, at a temperature and salinity close to those of seawater. The concentration of QAs and the length of the main substituting chain are the main parameters affecting the growth and adhesion of bacteria, but the nature of (i) the other chains, (ii) the counter‐ion and (iii) the rings when inserted in the QA molecule also influenced the bacteria. Increasing the concentration of the QAs decreased the growth rate of the bacteria, the maximum cell density at the plateau and the rate of adhesion. The effect of increasing the length of the main chain depended on the range of carbon numbers. Below 7 carbon atoms, the growth rate was not significantly modified, but the numbers of cells at the plateau increased in contrast with the adhesion rate which decreased rapidly. Increasing the length of the chain to between 7 and 16 carbon atoms resulted in a decrease in the growth rate, a decrease and then a stabilisation in the numbers of cells at the plateau and no further change in the adhesion rate. Possibly an increase in growth rate, adhesion rate and in the numbers of cells at the plateau may occur above 16 carbon atoms. In contrast, the length of the other chains influenced positively the cell concentration at the plateau, and more generally the efficiency of QAs decreased substantially when these chains had the same numbers of carbon atoms. QAs with iodide as counter‐ion were more effective than those with chloride or bromide and phenyl was more effective than benzyl as rings inserted in QAs. The minimum inhibitory concentrations (MIC) were often very high if compared to standard methods with laboratory strains, and this can be tentatively explained by the dominance of Gram— bacteria in the community assayed, the development of resistant strains in the cultures used with time and the presence of organic matter in the culture medium.     

Effects of surface texture and interrelated properties on marine biofouling: a systematic review

This systematic review examines effects of surface texture on marine biofouling and characterizes key research methodologies. Seventy-five published articles met selection criteria for qualitative analysis; experimental data from 36 underwent quantitative meta-analysis. Most studies investigated fouling mechanisms and antifouling performance only in laboratory assays with one to several test species. Textures were almost exclusively a single layer of regularly arranged geometric features rather than complex hierarchical or irregular designs. Textures in general had no effect or an inconclusive effect on fouling in 46% of cases. However, effective textures more often decreased (35%) rather than increased (19%) fouling. Complex designs were more effective against fouling (51%) than were regular geometric features (32%). Ratios of feature height, width, or pitch to organism body length were significant influences. The authors recommend further research on promising complex and hierarchical texture designs with more test species, as well as field studies to ground-truth laboratory results.     

Antifouling Potential of Some Marine Organisms from India Against Species of Bacillus and Pseudomonas

Crude methanolic extracts of 37 marine organisms (16 species of flora, 21 species of fauna) were screened for antibacterial properties against 5 strains of bacteria isolated from marine environments. Of these, 10 plant and 9 animal extracts exhibited antibacterial activity against at least one bacterial strain. The extracts of 6 species were active against all the strains: i.e., Stoechospermum marginatum (brown algae), Cymodocea rotundata (seagrass), Petrosia sp. and Psammaplysilla purpurea (sponges), Sinularia compressa (soft coral), and Cassiopeia sp. (jellyfish). Among the plants, Padina tetrastromatica (brown algae) extract exhibited significant activity (9–11-mm inhibition zone at 500 μg per 6-mm disc) against Bacillus pumilus and Pseudomonas vesicularis, while the extracts of Petrosia, Psammaplysilla, and Cassiopeia were strongly active (11–13-mm inhibition zone at 500 μg per 6-mm disc) against B. circulans and P. putida. It was further confirmed that the attachment of bacterial strains on glass slides was inhibited remarkably with increasing concentrations of bioextracts of Petrosia sp. and Psammaplysilla purpurea. The present findings could form the basis for exploring the antibacterial potential of bioactive molecules from some of the marine organisms that exhibited moderate to strong antibacterial properties.     

Combining a bio-based polymer and a natural antifoulant into an eco-friendly antifouling coating

Abstract

Biodegradable polymers are promising binders and carriers for natural antifoulants. In the present study, an antifouling (AF) coating was developed by adding a non-toxic AF compound (butenolide) to a bio-based and biodegradable poly(lactic acid)-based polyurethane. Mass loss measurement showed that the polymer degraded in seawater at a rate of 0.013?mg cm^?2?day^?1. Measurements showed that butenolide was released from the coatings into seawater over a period of at least three months. Both the concentration of butenolide in the coatings and the ambient temperature determined the release rate of butenolide. The results further demonstrate that incorporating rosin into the coatings increase the self-renewal rate of the polymer and facilitated the long-term release of butenolide from the coating. The results show that poly(lactic acid)-based polyurethane is a suitable polymer for butenolide-based AF coatings.     

Characterization and removal of biofouling from reverse osmosis membranes (ROMs) from a desalination plant in Northern Chile,using Alteromonas sp. Ni1-LEM supernatant

Abstract

Biofouling control in reverse osmosis membranes (ROMs) is challenging due to the high cost of treatments, and reduction in the life of ROMs. This study characterizes the biofouling in the ROMs from a desalination plant and reports its effective removal using the supernatant obtained from Alteromonas sp. strain Ni1-LEM. The characterization of the bacterial community revealed that the most abundant taxa in ROMs were the genera Fulvivirga and Pseudoalteromonas, and unclassified species of the families Flavobacteriaceae and Sphingomonadaceae. This bacterial community significantly decreased upon treatment with the supernatant from Alteromonas sp. Ni1-LEM, resulting in the prevalence of the genus Pseudoalteromonas. Furthermore, this bacterial supernatant significantly inhibited cell adhesion of seven benthic microalgae isolated from ROMs as well as promoting cell detachment of the existing microbial biofilms. The study showed that the extracellular supernatant modified the conformation of extracellular polymeric substances (EPS) in the biofouling of ROMs without any biocidal effects.     

Surface active adrenoceptor compounds prevent the settlement of cyprid larvae of Balanus improvisus

The barnacle Balanus improvisus is the major fouling macroorganism in Swedish waters and it colonizes most man‐made surfaces submerged in the sea. New or impending legislation restricts the use of traditional, hazardous antifouling coatings based on heavy metals, mainly copper and tin. This calls for the development of new non‐toxic methods that prevent barnacle settlement. In this work several adrenoceptor compounds are shown to be very efficient in preventing the settlement of cyprid larvae of B. improvisus. The settlement rate of laboratory‐reared cyprids was studied in hydrophilised polystyrene dishes containing adrenoceptor antagonists and agonists dissolved in seawater. Two of these drugs, medetomidine and clonidine, repeatedly inhibited settlement at concentrations between 1 nM and 10 nM. In the vertebrate adrenoceptor classification system, which separates pharmacological substances according to their receptor affinity, both of these substances are classified as α₂ adrenoceptor agonists. An inhibiting effect on presyn‐aptic receptors is suggested, but the localization of the receptor effect requires futher studies. Experiments also revealed that the inhibiting effect of medetomidine was reversible. Cyprids incubated with medetomidine for 20 h attached and metamorphosed into juvenile barnacles after washing and transferrence to seawater. The antagonizing compound atipamezole reversed the effect of medetomidine. This observation supports the assumption that this substance acts at the receptor level. Studies of the surface affinity of medetomidine revealed a strong tendency to accumulate in solid/ liquid phase boundaries. This ability makes it particularly attractive as a candidate for the development of a slow‐release carrier in marine coatings. Panels coated with medetomidine in an acrylate polymer and exposed in the field reduced the recruitment of B. improvisus by 96% after 4 weeks and by 70% after 8 weeks.     

Marine microbial natural products in antifouling coatings

Ecological problems associated with current antifouling technologies have increased interest in the natural strategies that marine organisms use to keep their surfaces clean and free from fouling. Bacteria isolated from living surfaces in the marine environment have been shown to produce chemicals that are potential antifoulants. Active compounds from the cells and culture supernatant of two bacterial strains, FS‐55 and NudMB50–11, isolated from surface of the seaweed, Fucus serratus, and the nudibranch, Archidoris pseudoargus, respectively, were extracted using solid phase extraction. The extracts were combined with acrylic base paint resin and assayed for antifouling activity by measuring their ability to inhibit the growth of fouling bacteria. These formulations were found to be active against fouling bacteria isolated from marine surfaces. The formulation of antifouling paints that incorporate marine microbial natural products is reported here for the first time. This is a significant advance towards the production of an environmentally friendly antifouling paint that utilises a sustainable supply of natural biodegradable compounds.     

Phenoloxidase (E.C. 1.14.18.1) from the byssus gland of Mytilus edulis: Purification,partial characterization and application for screening products with potential antifouling activities

Although a total ban on the use of TBT coatings is not expected in the short term, there is a growing need for environmentally safe antifouling systems. To assist in the rapid screening of a large number of potential antifouling substances, a method that is simple, efficient and inexpensive is required. The production of byssus threads by the blue mussel, Mytilus edulis, has often been studied for testing the antifouling efficacy of various compounds. The present study reports a new antifouling assay based on the inhibition of purified M. edulis phenoloxidase activity. The method has the advantage of being specific, reliable, sensitive and rapid.     

Potential antifouling strategies for marine finfish aquaculture: the effects of physical and chemical treatments on the settlement and survival of the hydroid Ectopleura larynx

The hydroid Ectopleura larynx is a common fouling organism on aquaculture nets. To contribute to the development of novel cleaning methods, laboratory and field studies determined the effects of heat (30, 40, 50 and 60°C for immersion times of 1 and 3 s) and acetic acid (0.2 and 2.0% for immersion times of 1, 3 and 10 s, 1 and 5 min) on the settlement of actinulae and the survival of juvenile and adult E. larynx. Laboratory studies showed that, regardless of immersion time, a temperature of 50°C was effective in preventing the settlement of actinulae and the survival of juveniles, while ≤12% of adult hydroids could survive. A temperature of 60°C killed all adult hydroids. For an acetic acid concentration of 0.2%, an immersion time of 1 min substantially reduced the settlement of actinulae and the survival of juvenile and adult hydroids, and none of the juvenile and adult hydroids survived after 5 min. For an acetic acid concentration of 2.0%, all immersion times were effective and reduced the mean settlement of actinulae and the survival of juvenile and adult hydroids to ≤10%. Field studies with fouled net panels exposed to selected heat or acetic acid treatments showed small reductions in mean wet weight and net aperture occlusion of the net panels 2 and 5 days after treatment. Visual inspections of the net panels showed that hydranths of the hydroids were shed, but the dead stolons of the hydroids remained on the treated net panels. Novel cleaning methods and devices may utilise these results to effectively kill E. larynx on aquaculture nets, while further studies are needed to determine the necessity of removing the dead hydroids before further biofouling accumulates on thenets.     

Anti-barnacle activity of novel simple alkyl isocyanides derived from citronellol

Twenty novel simple alkyl isocyanides derived from citronellol were synthesized and evaluated for their antifouling activity and toxicity against cypris larvae of the barnacle, Balanus amphitrite. The anti-barnacle activity of the synthesized isocyanides was in the EC₅₀ range of 0.08–1.49 μg ml^?1. Simple isocyanides containing a benzoate and chloro group showed the most potent anti-barnacle activity. In addition, none of the synthesized compounds showed significant toxicity and LC₅₀ values were <10 μg ml^?1. The LC₅₀/EC₅₀ ratios of almost all of the synthesized compounds were >10². The results indicate that these simple isocyanides are promising low-toxicity antifouling agents.