Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.     

Availability and mobility of nutrients in acid forest soil treated with fast and slow-release nutrients

The effects of slow and fast-release fertilizers (P, K, Mg) on the movement and availability of nutrients in acid forest soil were studied. Fast-release superphosphate, potassium chloride and magnesium sulphate and slow-release apatite (P) and biotite (K, Mg) were applied alone or together with urea or urea+limestone. The nutrient content in the organic horizon was determined one growing season and three growing seasons after the application, and in the mineral layer after one growing season. The movement of nutrient ions in the organic horizon was studied by an ion exchange resin bag method during a 5-month period following application. The fast-release salts immediately increased the soluble P and exchangeable K and Mg contents in the organic and mineral soils and in the resin bags. After three growing seasons the effect of K application in the organic layer was non-detectable and that of P had clearly diminished. Apatite gradually increased soluble P content in the organic layer, but biotite had only a minor effect on the K and Mg contents. The nutrients from the fast-release fertilizers had clearly become available and mobile in the year of application and were thus susceptible to leaching. The rate of nutrient release from apatite and biotite is slower and the added nutrients are retained in the organic horizon. Slow-release compounds, like apatite and biotite, might be potential fertilizers for counteracting acidic deposition and subsequent nutrient losses.     

Site binding as a local equilibrium. Mn2+ binding to poly(acrylic acid) as a function of the degree of ionization

Mn2+ binding to poly(acrylic acid) at different degrees of ionization, alpha, has been studied from the frequency dependence of the water protons' relaxation rates T1(-1) and T2(-1). Site binding is treated as an equilibrium with the concentration of free ions at the immediate vicinity (CIV) of the polyion. The CIV is calculated as the solution of the Poisson-Boltzmann equation at the surface of the cylindrical polyion. A single value of K is shown to fit the results at all values of alpha. The amount of site binding is higher than the total amount of condensed divalent counterions predicted for a finite polyion concentration in the presence of monovalent counterions by Manning's theory.     

Biosynthesis of sesquiterpenes in Hymenaea inferred from their quantitative co-occurrence

Leaf pocket resins of 11 species of the tropical arborescent genus Hymenaea are virtually identical qualitatively, but of widely varying quantitative proportions. Within this large range of variability, several strong positive quantitative correlations between resin constituents were found, especially between caryophyllene and β-humulene and between γ-muurolene and δ-cadinene. These data lead to clarification of sesquiterpene biosynthetic routes in Hymenaea. In addition, quantitative relationships found among caryophyllene, α- and β-selinene, γ-muurolene and δ-cadinene are explained only with difficulty by long accepted biosynthetic pathways, and the intermediacy of germacrenes is suggested.     

INHIBITION OF CHLORELLA (CHLOROPHYCEAE) GROWTH BY FATTY ACIDS, USING THE PAPER DISC METHOD1,2

Using the paper disc-agar plate method, a number of fatty and related acids have been tested for tested activity for inhibiting the growth of Chlorella pyrenoidosa Chick. Of the saturated acids, a peak in growth inhibiting activity wax observed in the C₇–C₁₂ range, where inhibition wax observed when solutions down to 0.02 M were applied to the discs. Most of the unsaturated acids tested showed greater inhibition than did the corresponding saturated acids. Acrylic acid showed detectable inhibition at 0.001 M concentration.     

The effect of immersion cleansers on gloss,colour and sorption of acetal denture base material

doi: 10.1111/j.1741‐2358.2012.00657.x The effect of immersion cleansers on gloss, colour and sorption of acetal denture base material Objective: To study the effect of peroxide and hypochlorite cleansers on gloss, colour and sorption of acetal denture resins. Materials and methods: Pink acetal and thermoplastic acrylic resins were evaluated. Thirty‐five specimens 39 × 39 × 1.8 mm of each resin were prepared. Each group of specimens (n = 7) was then immersed into cleansers for 100 days. Group I immersed in tap water, Group II in Corega Extradent for 5 min, Group III in Corega Extradent for 8 h, Group IV in NitrAdine? Seniors for 15 min and Group V in NaOCl 5.25%. Gloss, colour and weight measurements were taken initially and after 100 days. Data subjected to two‐way anova and Tukey’s test at α = 0.05. Results: Acrylic resin showed reductions of glossiness from ?5 to ?15 and acetal from ?0.2 to ?6. Colour changes (ΔΕ*) ranged from 2.64 to 7.64 for acrylic and 2.77 to 26.54 for acetal resin. Sorption for acrylic ranged from 11.64 to 17.06 μg/mm³ and 9.18 to 24.79 μg/mm³ for acetal resin. The results of (ΔΕ*) and sorption showed an interaction between denture resins and cleansers. Conclusions: The gloss of acetal resin was less affected by water, peroxides and NaOCl 5.25% compared with acrylic resin. Acetal resin showed clinically acceptable (ΔΕ*) whereas acrylic resin unacceptable ones for water and peroxide solutions. The immersion of acetal resin in NaOCl 5.25% showed clinically unacceptable (ΔΕ*) and higher sorption and should be avoided or should be managed with care.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.     

大孔树脂分离纯化“黑金刚”紫马铃薯花青苷工艺研究

以紫色马铃薯"黑金刚"花青苷为原料,采用D101、HDP100A、HDP450A、NK-9、AB-8五种大孔吸附树脂对花青苷的吸附与解析特性进行了比较研究,并在此基础上,采用最佳大孔树脂对花青苷纯化过程中的静态、动态吸附和解析附条件进行了优化研究。结果表明AB-8大孔树脂具有较好的吸附和解析能力,是纯化紫色马铃薯花青苷的最佳树脂,较优纯化条件为:上样液花青苷浓度为0.028mg.g-1,上样液pH=2,洗脱液乙醇浓度为50%,洗脱液pH=1,吸附流速为1mL.min-1,洗脱流速为1mL.min-1。经大孔树脂纯化后,色价值比纯化前提高了7.55倍。     

Fourier transform IR study of aggregational behavior of N-acetyl-L- and N-butyloxycarbonyl-L-glutamic acid oligomeric benzyl esters in dioxane and benzene: beta-turn --> antiparallel beta-sheet transition

Resins from several different genera are studied using Fourier transform (FT)-Raman spectroscopy. Tree resins can be broadly divided into those that contain diterpenoid components and those that contain triterpenoid components. The diterpenoid resins analyzed are from the genera Pinus, Cedrus, and Agathis (kauri resin) and the triterpenoid resins examined are samples from Pistacia, Boswellia (frankincense), and Commiphora (myrrh) genera. A protocol is developed to nondestructively distinguish diterpenoid and triterpenoid resins and to differentiate the genera within the two types. The effects of oxidation on the discrimination of the FT-Raman spectra are considered.