MV-mimicking micelles loaded with PEG-serine-ACP nanoparticles to achieve biomimetic intra/extra fibrillar mineralization of collagen in vitro

Since their discovery, matrix vesicles (MVs) containing minerals have received considerable attention for their role in the mineralization of bone, dentin and calcified cartilage. Additionally, MVs' association with collagen fibrils, which serve as the scaffold for calcification in the organic matrix, has been repeatedly highlighted. The primary purpose of the present study was to establish a MVs–mimicking model (PEG-S-ACP/micelle) in vitro for studying the exact mechanism of MVs-mediated extra/intra fibrillar mineralization of collagen in vivo. In this study, high-concentration serine was used to stabilize the amorphous calcium phosphate (S-ACP), which was subsequently mixed with polyethylene glycol (PEG) to form PEG-S-ACP nanoparticles. The nanoparticles were loaded in the polysorbate 80 micelle through a micelle self-assembly process in an aqueous environment. This MVs–mimicking model is referred to as the PEG-S-ACP/micelle model. By adjusting the pH and surface tension of the PEG-S-ACP/micelle, two forms of minerals (crystalline mineral nodules and ACP nanoparticles) were released to achieve the extrafibrillar and intrafibrillar mineralization, respectively. This in vitro mineralization process reproduced the mineral nodules mediating in vivo extrafibrillar mineralization and provided key insights into a possible mechanism of biomineralization by which in vivo intrafibrillar mineralization could be induced by ACP nanoparticles released from MVs. Also, the PEG-S-ACP/micelle model provides a promising methodology to prepare mineralized collagen scaffolds for repairing bone defects in bone tissue engineering.     

Design,Synthesis, and Biological Evaluation of 2‐(2‐Bromo‐3‐nitrophenyl)‐5‐phenyl‐1,3,4‐oxadiazole Derivatives as Possible Anti‐Breast Cancer Agents

Breast Cancer (BCa) is the most often diagnosed cancer among women who were in the late 1940’s. Breast cancer growth is largely dependent on the expression of estrogen and progesterone receptor. Breast cancer cells may have one, both, or none of these receptors. The treatment for breast cancer may involve surgery, hormonal therapy (Tamoxifen, an aromatase inhibitor, etc.) and oral chemotherapeutic drugs. The molecular docking technique reported the findings on the potential binding modes of the 2‐(2‐bromo‐3‐nitrophenyl)‐5‐phenyl‐1,3,4‐oxadiazole derivatives with the estrogen receptor (PDB ID: 3ERT). The 1,3,4‐oxadiazole derivatives 4a – 4j have been synthesized and described by spectroscopic method. 2‐(2‐Bromo‐6‐nitrophenyl)‐5‐(4‐bromophenyl)‐1,3,4‐oxadiazole ( 4c ) was reconfirmed by single‐crystal XRD. All the compounds have been tested in combination with generic Imatinib pharmaceutical drug against breast cancer cell lines isolated from Caucasian woman MCF‐7, MDA‐MB‐453 and MCF‐10A non‐cancer cell lines. The compounds with the methoxy (in 4c ) and methyl (in 4j ) substitution were shown to have significant cytotoxicity, with 4c showing dose‐dependent activation and decreased cell viability. The mechanism of action was reported by induced apoptosis and tested by a DNA enzyme inhibitor experiment (ELISA) for Methyl Transferase. Molecular dynamics simulations were made for hit molecule 4c to study the stability and interaction of the protein?ligand complex. The toxicity properties of ADME were calculated for all the compounds. All these results provide essential information for further clinical trials.     

Synthesis of gold nanoparticles using Crinum macowanii bulb extracts and the application of these materials in blood detections at crime scenes

We here in report the synthesis of gold nanoparticles (AuNPs) using a Crinum macowanii bulb water extract. The as‐synthesized AuNPs were characterized using ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, and a zeta potential‐sizer. The results showed that the as‐synthesized AuNPs were crystalline and mostly spherical in shape with a small mixture of triangular, tetrahedral, hexagonal, octagonal, and diamond shapes. The as‐synthesized AuNPs together with those synthesized by conventional methods were subsequently used as enhancers for the luminol signal in blood detection. It was noted that the AuNPs synthesized from the Crinum macowanii bulb water extract could enhance the chemiluminescence signal for blood detection by luminol to the same extent as AuNPs prepared by conventional methods. Furthermore, both types of AuNPs served as fluorescence enhancers for blood detection when luminol was replaced with the bulb water extract.     

Synthesis and structural characterization of silver nanoparticles using bacterial exopolysaccharide and its antimicrobial activity against food and multidrug resistant pathogens

A green, simple, and effective approach was performed to synthesize potent silver nanoparticles (SNPs) using bacterial exopolysaccharide as both a reducing and stabilizing agent. The synthesized SNPs were characterized using UV-vis spectroscopy, transmission electron microscopy, energy dispersive X-ray analysis, X-ray diffraction, and Fourier-transform-infrared spectra analyses. The SNPs varied in shape and were multidispersed with a mean diameter of 10 nm ranging from 2 to 15 nm and were stable up to 2 months at room temperature. The antimicrobial activity of the SNPs was analyzed against bacterial and fungal pathogens using the agar well diffusion method. Dose dependent inhibition was observed for all bacterial pathogens. The multidrug resistant pathogens P. aeruginosa and K. pneumonia were found to be more susceptible to the SNPs than the food borne pathogen L. monocytogenes. The fungi Aspergillus spp. exhibited a maximum zone of inhibition compared to that of Penicillum spp. These results suggest that exopolysaccharide-stabilized SNPs can be used as an antimicrobial agent for various biomedical applications.     

Carbon Coated ZnFe2O4 Nanoparticles for Advanced Lithium‐Ion Anodes

The preparation and electrochemical characterization of a new material consisting of carbon coated ZnFe₂O₄ nanoparticles is presented. This material, which offers an interesting combination of alloying and conversion mechanisms, is capable of hosting up to nine equivalents of lithium per unit formula, corresponding to an exceptional specific capacity, higher than 1000 mAh g^?1. Composite electrodes of such a material, prepared using environmentally friendly sodium carboxymethyl cellulose as binder, showed the highest, ever reported, specific capacity and high rate performance upon long‐term testing. Furthermore, in situ X‐ray diffraction analysis allowed identifying the reduction process occurring upon initial lithiation.     

Isolation and physico-chemical characterisation of extracellular polymeric substances produced by the marine bacterium Vibrio parahaemolyticus

A marine bacterial strain identified as Vibrio parahaemolyticus by 16S rRNA gene (HM355955) sequencing and gas chromatography (GC) coupled with MIDI was selected from a natural biofilm by its capability to produce extracellular polymeric substances (EPS). The EPS had an average molecule size of 15.278 μm and exhibited characteristic diffraction peaks at 5.985°, 9.150° and 22.823°, with d-spacings of 14.76661, 9.29989 and 3.89650 Å, respectively. The Fourier-transform infrared spectroscopy (FTIR) spectrum revealed aliphatic methyl, primary amine, halide groups, uronic acid and saccharides. Gas chromatography mass spectrometry (GCMS) confirmed the presence of arabinose, galactose, glucose and mannose. ¹HNMR (nuclear magnetic resonance) revealed functional groups characteristic of polysaccharides. The EPS were amorphous in nature (CI_xrd 0.092), with a 67.37% emulsifying activity, thermostable up to 250°C and displayed pseudoplastic rheology. MALDI-TOF–TOF analysis revealed a series of masses, exhibiting low-mass peaks (m/z) corresponding to oligosaccharides and higher-mass peaks for polysaccharides consisting of different ratios of pentose and hexose moieties. This is the first report of a detailed characterisation of the EPS produced by V. parahaemolyticus, which could be further explored for biotechnological and industrial use.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.     

Effect of montmorillonite on morphology,glass transition and crystallinity of the xylitol-plasticized bionanocomposites

High amylose based nanocomposites plasticized by xylitol were prepared via twin-screw extrusion. The synergistic interaction in the xylitol-plasticized nanocomposite was studied via various characterization methods and the unique behavior of the xylitol-plasticized nanocomposite had been discussed. As revealed in the XRD and TEM results, good intercalated/exfoliated morphology had been achieved in all the nanocomposites. Furthermore, the expansion of nanoclay basal spacing was related to the xylitol/nanoclay ratio. DSC analysis clearly proved the unique crystallization process of xylitol-plasticized samples. Moreover, in the crystallization domain results, two domains sized at approximately 93.7 Å and 346 Å were found. This observation points to a two-level complex effect from two aggregate domains; one, the re-aggregation of certain number of silicate layers into domains which trap some of the amylose polymer chains, and two, the bulk drying process which combines smaller amylose crystalline domains within a larger amorphous high amylose matrix.     

Formation of Hydroxysulphate Green Rust 2 as a Single Iron(II-III) Mineral in Microbial Culture

Although GR2(SO₄ ^2-) can be easily formed by abiotic synthesis, the biotic formation of hydroxysulphate as a single iron(II-III) mineral in microbial culture and its characterization was not achieved. This study was carried out to investigate the sole formation of GR2(SO₄ ^2-) during the reduction of γ-FeOOH by a dissimilatory iron-respiring bacterium, Shewanella putrefaciens CIP 8040^T. Reduction experiments were performed in a non-buffered medium devoid of organic compounds, with 25 mM of sulphate and with a range of lepidocrocite concentrations with H₂ as the electron donor under nongrowth conditions. The resulting biogenic solids, after iron-respiring activity, were characterized by X-ray diffraction (XRD), transmission Mössbauer spectroscopy (TMS) and electron microscopy (SEM and TEM). The sulphate has been identified as the intercalated anion by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). In addition, the structure of this sulphate anion was discussed. Our experimental study demonstrated that, under H₂ atmosphere, the biogenic solid was a GR2(SO₄ ^2-), as the sole iron(II-III) bearing mineral, whatever the initial lepidocrocite concentration. The crystals of the biotically formed GR2(SO₄ ^2-) are significantly larger than those observed for GR2(SO₄ ^2-) obtained through abiotic preparation, < 15 μ m diameter as against 0.5–4 μm, respectively.