Preparation and properties of the water-soluble chlorophyll-bovine serum albumin complexes

By mixing chlorophyll (Chl) a or b with a dense bovine serum albumin solution, the water-soluble Chl-bovine serum albumin complexes were prepared. These complexes, eluted near the void volume on a gel filtration, were separated well from unreacted bovine serum albumin, indicating an aggregation of such molecules in the complexes. Preparation of chlorophyllide (Chlide) a- or Chlide b-bovine serum albumin complex was unsuccessful, while the phytol-, and β-carotene-bovine serum albumin complexes could be obtained. Chls in the Chl-bovine serum albumin complexes had the following characteristics. (i) Main absorption peak of Chl a or b in the red region occurred at 675 nm or 652 nm, respectively. The Chl a-bovine serum albumin complex having absorption peak at 740 nm was also prepared. As compared with the stabilities of Chl a and b in Triton X-100. (ii) Both Chls in the bovine serum albumin-complexes were stable against oxidative stresses, such as photobleaching, Fenton reagent, peroxidase-H₂O₂ system. But (iii) they were easily hydrolyzed by chlorophyllase. These properties of Chls in the bovine serum albumin-complexes were similar to those of Chls in the isolated light-harvesting Chl a/b protein complex. A possible localization of Chls within the bovine serum albumin complexes was suggested that the porphyrin moiety of Chl was buried in bovine serum albumin; however, the hydrophilic edge of porphyrin ring, adjacent to the phytol group, occurred in the hydrophilic region of a bovine serum albumin molecule.     

氰类和酯类取代基水溶金属卟啉与DNA相互作用的共振拉曼研究

用共振拉曼和紫外－可见吸收光谱研究了水溶金属卟啉４－Ｎ－乙酸乙酯基－吡啶基铜卟啉和镍卟啉［简称Ｃｕ（ＮＥＡＥ）和Ｎｉ（ＮＥＡＥ）］及４－Ｎ－乙腈基－吡啶基铜卟啉［简称Ｃｕ（ＮＡＣＮ）］与小牛胸腺ＤＮＡ的相互作用。分析表明Ｃｕ（ＮＥＡＥ）、Ｎｉ（ＮＥＡＥ）和Ｃｕ（ＮＡＣＮ）分别以外部键联、部分插入和沟槽方式与ＤＮＡ作用;卟啉插入ＤＮＡ时吡啶基团向卟啉环平面转动但不可能转成与之共面;而以非插入方式作用时吡啶基团会向垂直于或者平行于卟啉环平面转动。吡啶取代基的大小和空间位阻是影响相互作用方式的关键因素之一。     

Chemistry in environmentally benign media Part 1. Synthesis and characterization of 1,2-bis[bis(hydroxymethyl)phosphino]ethane (‘HMPE’). X-ray structure of [Pt{(HOH2C)2PCH2CH2P(CH2OH)2}2](Cl)2

The water-soluble bisphosphine, 1,2-bis(bis(hydroxymethyl)phosphino)ethane (1), was synthesized in near quantitative yield by the reaction of bisphosphine, H₂PCH₂CH₂PH₂, with an aqueous formaldehyde in the presence of K₂PtCl₄. The reaction of this water-soluble bisphosphine 1 with cis-Pt(COD)Cl₂ affords the mononuclear bischelate complex, [Pt{(HOH₂C)₂PCH₂CH₂P(CH₂OH)₂}₂](Cl)₂ (2), in near quantitative yield. The new ligand and complex have been characterized spectroscopically and the structure of the metal complex, 2, was determined by X-ray crystallography. The Pt(II) complex 2 crystallizes in the orthorhombic space group Pbca(a=14.623(1), B=16.216(2), C=9.319(4) Å) with Z=4. The final R value is 0.024.     

Dopamine Semiquinone Radical Doped PEDOT:PSS: Enhanced Conductivity,Work Function and Performance in Organic Solar Cells

Poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has been is applied as hole transport material in organic electronic devices for more than 20 years. However, the redundant sulfonic acid group of PEDOT:PSS has often been overlooked. Herein, PEDOT:PSS‐DA is prepared via a facile doping of PEDOT:PSS with dopamine hydrochloride (DA·HCl) which reacts with the redundant sulfonic acid of PSS. The PEDOT:PSS‐DA film exhibits enhanced work function and conductivity compared to those of PEDOT:PSS. PEDOT:PSS‐DA‐based devices show a power conversion efficiency of 16.55% which is the highest in organic solar cells (OSCs) with (poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)‐4‐fluorothiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithio‐phene))‐co‐(1,3‐di(5‐thiophene‐2‐yl)‐5,7‐bis(2‐ethylhexyl)‐benzo[1,2‐c:4,5‐c′]dithiophene‐4,8‐dione))] (PM6):(2,2′‐((2Z,2′Z)‐((12,13‐bis(2‐ethylhexyl)‐3,9‐diundecyl‐12,13‐dihydro‐[1,2,5]thiadiazolo[3,4‐e]thieno[2′′,3′:4′,5′]thieno[2′,3′:4,5]pyrrolo[3,2‐g]thieno[2′,3′:4,5]thieno[3,2‐b]indole‐2,10‐diyl)bis(methanylylidene))bis(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐indene‐2,1‐diylidene))dimalononitrile) (Y6) as the active layer. Furthermore, PEDOT:PSS‐DA also exhibits enhanced performance in three other donor/acceptor systems, exhibiting high compatibility in OSCs. This work demonstrates that doping PEDOT:PSS with various amino derivatives is a potentially efficient strategy to enhance the performance of PEDOT:PSS in organic electronic devices.     

Unifying Charge Generation,Recombination, and Extraction in Low‐Offset Non‐Fullerene Acceptor Organic Solar Cells

Even though significant breakthroughs with over 18% power conversion efficiencies (PCEs) in polymer:non‐fullerene acceptor (NFA) bulk heterojunction organic solar cells (OSCs) have been achieved, not many studies have focused on acquiring a comprehensive understanding of the underlying mechanisms governing these systems. This is because it can be challenging to delineate device photophysics in polymer:NFA blends comprehensively, and even more complicated to trace the origins of the differences in device photophysics to the subtle differences in energetics and morphology. Here, a systematic study of a series of polymer:NFA blends is conducted to unify and correlate the cumulative effects of i) voltage losses, ii) charge generation efficiencies, iii) non‐geminate recombination and extraction dynamics, and iv) nuanced morphological differences with device performances. Most importantly, a deconvolution of the major loss processes in polymer:NFA blends and their connections to the complex BHJ morphology and energetics are established. An extension to advanced morphological techniques, such as solid‐state NMR (for atomic level insights on the local ordering and donor:acceptor π? π interactions) and resonant soft X‐ray scattering (for donor and acceptor interfacial area and domain spacings), provide detailed insights on how efficient charge generation, transport, and extraction processes can outweigh increased voltage losses to yield high PCEs.     

Using C60 fullerenes for photodynamic inactivation of mosquito iridescent viruses

This article describes the photodynamic inactivation of mosquito iridescent virus (MIV) Aedes flavescens in the presence of water-soluble C₆₀ fullerenes. It has been observed that the photodynamic inactivation of MIV for about 1?h reduces the infectious titre of the virus in large wax-moth larvae Galleria mellonella to 4.5 lg ID₅₀/mL. The influence of the C₆₀ concentration on its anti-viral activity was tested in the concentration range from 1 to 0.001?mg/mL. It has been found that C₆₀ is able to inactivate the iridovirus even in low concentrations. Consequently, the findings of this work suggest that photoexcited C₆₀ fullerenes can be successfully used for the inactivation of iridoviruses in biological systems.     

Direct Correlation of the Organic Solar Cell Device Performance to the In‐Depth Distribution of Highly Ordered Polymer Domains in Polymer/Fullerene Films

This study correlates the device performance of organic solar cells and the electronic charge transport within polymer/fullerene films, directly to the optical order of the polymer. The optical order was measured by spectroscopic ellipsometry and evaluated by our previously derived model. We were able to determine the in‐depth distribution of higher and lower ordered poly(3‐hexylthiophene) (P3HT) domains within an [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) matrix. The over the film thickness integrated volume fraction of highly ordered P3HT domains could be directly correlated to the corresponding solar cell device performance. We are able to describe various thermally annealing conditions between room‐temperature and 200 °C.     

Relating Recombination,Density of States,and Device Performance in an Efficient Polymer:Fullerene Organic Solar Cell Blend

We explore the interrelation between density of states, recombination kinetics, and device performance in efficient poly[4,8‐bis‐(2‐ethylhexyloxy)‐benzo[1,2‐b:4,5‐b']dithiophene‐2,6‐diyl‐alt‐4‐(2‐ethylhexyloxy‐1‐one)thieno[3,4‐b]thiophene‐2,6‐diyl]:[6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PBDTTT‐C:PC₇₁BM) bulk‐heterojunction organic solar cells. We modulate the active‐layer density of states by varying the polymer:fullerene composition over a small range around the ratio that leads to the maximum solar cell efficiency (50–67 wt% PC₇₁BM). Using transient and steady‐state techniques, we find that nongeminate recombination limits the device efficiency and, moreover, that increasing the PC₇₁BM content simultaneously increases the carrier lifetime and drift mobility in contrast to the behavior expected for Langevin recombination. Changes in electronic properties with fullerene content are accompanied by a significant change in the magnitude or energetic separation of the density of localized states. Our comprehensive approach to understanding device performance represents significant progress in understanding what limits these high‐efficiency polymer:fullerene systems.     

Inter‐Fullerene Electronic Coupling Controls the Efficiency of Photoinduced Charge Generation in Organic Bulk Heterojunctions

Photoinduced charge generation (PCG) dynamics are notoriously difficult to correlate with specific molecular properties in device relevant polymer:fullerene organic photovoltaic blend films due to the highly complex nature of the solid state blend morphology. Here, this study uses six judiciously selected trifluoromethylfullerenes blended with the prototypical polymer poly(3‐hexylthiophene) and measure the PCG dynamics in 50 fs–500 ns time scales with time‐resolved microwave conductivity and femtosecond transient absorption spectroscopy. The isomeric purity and thorough chemical characterization of the fullerenes used in this study allow for a detailed correlation between molecular properties, driving force, local intermolecular electronic coupling and, ultimately, the efficiency of PCG yield. The findings show that the molecular design of the fullerene not only determines inter‐fullerene electronic coupling, but also influences the decay dynamics of free holes in the donor phase even when the polymer microstructure remains unchanged.