Three-dimensional perfused cell culture

Compelling evidence suggests the limitation and shortcomings of the current and well established cell culture method using multi-well plates, flasks and Petri dishes. These are particularly important when cell functions are sensitive to the local microenvironment, cell–cell and cell–extracellular matrix interactions. There is a clear need for advanced cell culture systems which mimic in vivo and more physiological conditions. This review summarises and analyses recent progress in three dimensional (3D) cell culture with perfusion as the next generation cell culture tools, while excluding engineered tissue culture where three dimensional scaffold has to be used for structural support and perfusion for overcoming mass transfer control. Apart from research activities in academic community, product development in industry is also included in this review.     

Stimulation of tissue plasminogen activator production from epithelial cell lines

The aim of this study was to investigate the possibility of enhancing the yield of tissue plasminogen activator (tPA) from two epithelial cell lines of normal (non-malignant) derivation grown in tissue culture. The three agents used in this investigation were chosen because of their proven enhancing effect on analogous cells or products. The anabolic hormone stanozolol was found to have no significant stimulatory effect on these cell lines. A phorbol acetate (12-O-tetradecanoylphorbol 13-acetate) caused a twofold enhancement in tPA yield but the most significant results were obtained with 5-azacytidine. This agent increased the yield by up to fourfold in small stationary cultures and threefold in large-scale microcarrier cultures. A combination of azacytidine and phorbol acetate did not have an additive effect on total yield but did alter the kinetics of tPA expression with time. Indications were that the maximum yield with these types of potentiating agents was achieved as it could not be increased by using a combination of two different agents.     

Dynamic features of cells expressing macrophage properties in tissue cultures of dissociated cerebral cortex from the rat

Summary Two previously identified forms of macrophage were investigated in primary cultures of cerebral cortical cells. Dynamic features were revealed through time-lapse video recording and aspects of macrophage function were assessed. The two cell forms were shown to be different pre-mitotic stages of a single cell type. The cell cycle for these cells involved an initial large, flat, quiescent cell which retracted to yield a slightly rounded form with numerous processes. This latter form lost processes and developed profuse filopodia as it became very rounded just prior to division; both resulting daughter cells then regained the initial large flat appearance. These cells possessed several properties of macrophages, including phagocytosis, nucleoside diphosphatase enzyme, and CR3 receptors. These properties were transient, expressed just before and after mitosis, but subsequently down-regulated in the flat daughter cells. Because of this feature, it was difficult to determine the exact size of this cell population; however, the observed rate of proliferation suggests it may be substantial. It is suggested that these cells correspond to non-microglial macrophages of brain tissue and, because of their significant down-regulation, they may be difficult to detect. This may be important in studies of brain accessory immune cells in tissue culture.     

Field performance of micropropagated,macropropagated, and seed-derived propagules of three Eucalyptus grandis ortets

Tree size, survival, and coppicing of micropropagated plantlets, macropropagated cuttings, and seedlings of Eucalyptus grandis Hill ex Maiden were monitored through 57 months in a study in southern Florida to assess propagation options. Two plantlet lines developed by direct micropropagation and orchard open-pollinated seedlings from three ortets were compared in the main study. Rooted cuttings from up to four ramets of each of the three ortets and another ortet were examined in an adjacent supplemental study. Freezes at six and 16 months killed most initial and first-coppice stems to the ground. Most developmental differences in the main study were consistent from ages 2 to 57 months. Propagation by ortet interactions were observed beginning at 21 months, due to the poor performance of seedlings of one ortet after the second freeze. At 57 months, no differences in tree height, DBH, volume, or survival were detected between plantlet lines and between rooted cuttings and plantlets, but seedlings were inferior to plantlets and cuttings. Vegetative propagules had more uniform tree size at every age, with typically less than one-half the variability observed among seedlings. Even though plantlets and cuttings may be more expensive to produce, they have numerous advantages over seedlings for E. grandis plantation establishment in Florida.     

ECM Protein Nanofibers and Nanostructures Engineered Using Surface-initiated Assembly

The extracellular matrix (ECM) in tissues is synthesized and assembled by cells to form a 3D fibrillar, protein network with tightly regulated fiber diameter, composition and organization. In addition to providing structural support, the physical and chemical properties of the ECM play an important role in multiple cellular processes including adhesion, differentiation, and apoptosis. In vivo, the ECM is assembled by exposing cryptic self-assembly (fibrillogenesis) sites within proteins. This process varies for different proteins, but fibronectin (FN) fibrillogenesis is well-characterized and serves as a model system for cell-mediated ECM assembly. Specifically, cells use integrin receptors on the cell membrane to bind FN dimers and actomyosin-generated contractile forces to unfold and expose binding sites for assembly into insoluble fibers. This receptor-mediated process enables cells to assemble and organize the ECM from the cellular to tissue scales. Here, we present a method termed surface-initiated assembly (SIA), which recapitulates cell-mediated matrix assembly using protein-surface interactions to unfold ECM proteins and assemble them into insoluble fibers. First, ECM proteins are adsorbed onto a hydrophobic polydimethylsiloxane (PDMS) surface where they partially denature (unfold) and expose cryptic binding domains. The unfolded proteins are then transferred in well-defined micro- and nanopatterns through microcontact printing onto a thermally responsive poly(N-isopropylacrylamide) (PIPAAm) surface. Thermally-triggered dissolution of the PIPAAm leads to final assembly and release of insoluble ECM protein nanofibers and nanostructures with well-defined geometries. Complex architectures are possible by engineering defined patterns on the PDMS stamps used for microcontact printing. In addition to FN, the SIA process can be used with laminin, fibrinogen and collagens type I and IV to create multi-component ECM nanostructures. Thus, SIA can be used to engineer ECM protein-based materials with precise control over the protein composition, fiber geometry and scaffold architecture in order to recapitulate the structure and composition of the ECM in vivo.     

Cryogenic 3D printing for tissue engineering

We describe a new cryogenic 3D printing technology for freezing hydrogels, with a potential impact to tissue engineering. We show that complex frozen hydrogel structures can be generated when the 3D object is printed immersed in a liquid coolant (liquid nitrogen), whose upper surface is maintained at the same level as the highest deposited layer of the object. This novel approach ensures that the process of freezing is controlled precisely, and that already printed frozen layers remain at a constant temperature. We describe the device and present results which illustrate the potential of the new technology.     

The relationship between turgor pressure and titratable acidity in mesophyll cells of intact leaves of a Crassulacean-acid-metabolism plant,Kalanchoe daigremontiana Hamet et Perr

Day/night changes in turgor pressure (P) and titratable acidity content were investigated in the (Crassulacean-acid-metabolism (CAM) plant Kalanchoe daigremontiana. Measurements of P were made on individual mesophyll cells of intact attached leaves using the pressure-probe technique. Under conditions of high relative humidity, when transpiration rates were minimal, changes in P correlated well with changes in the level of titratable acidity. During the standard 12 h light/12 h dark cycle, maximum turgor pressure (0.15 MPa) occurred at the end of the dark period when the level of titratable acidity was highest (about 300 eq H⁺·g^-1 fresh weight). A close relationship between P and titratable acidity was also seen in leaves exposed to perturbations of the standard light/dark cycle. (The dark period was either prolonged, or else only CO₂-free air was supplied in this period). In plants deprived of irrigation for five weeks, diurnal changes in titratable acidity of the leaves were reduced (H=160 eq H⁺·g^-1 fresh weight) and P increased from essentially zero at the end of the light period to 0.02 MPa at the end of the dark period. Following more severe water stress (experiments were made on leaves which had been detached for five weeks), P was zero throughout day and night, yet small diurnal changes in titratable acidity were still measured. These findings are discussed in relation to a hypothesis by Lüttge et al. 1975 (Plant Physiol. 56,613-616) for the role of P in the regulation of acidification/de-acidification cycles of plants exhibiting CAM.Abbreviations CAM crassulacean acid metabolism - FW fresh weight - P turgor pressure     

Cooperation of epidermis and inner tissues in auxin-mediated growth of maize coleoptiles

The function of the epidermis in auxinmediated elongation growth of maize (Zea mays L.) coleoptile segments was investigated. The following results were obtained: i) In the intact organ, there is a strong tissue tension produced by the expanding force of the inner tissues which is balanced by the contracting force of the outer epidermal wall. The compression imposed by the stretched outer epidermal wall upon the inner tissues gives rise to a wall-pressure difference which can be transformed into a water-potential difference between inner tissues and external medium (water) by removal of the outer epidermal wall. ii) Peeled segments fail to respond to auxin with normal growth. The plastic extensibility of the inner-tissue cell walls (measured with a constant-load extensiometer using living segments) is not influenced by auxin (or abscisic acid) in peeled or nonpeeled segments. It is concluded that auxin induces (and abscisic acid inhibits) elongation of the intact segment by increasing (decreasing) the extensibility specifically in the outer epidermal wall. In addition, tissue tension (and therewith the pressure acting on the outer epidermal wall) is maintained at a constant level over several hours of auxin-mediated growth, indicating that the inner cells also contribute actively to organ elongation. However, this contribution does not involve an increase of cell-wall extensibility, but a continuous shifting of the potential extension threshold (i.e., the length to which the inner tissues would extend by water uptake after peeling) ahead of the actual segment length. Thus, steady growth involves the coordinated action of wall loosening in the epidermis and regeneration of tissue tension by the inner tissues. iii) Electron micrographs show the accumulation of striking osmiophilic material (particles of approx. 0.3 m diameter) specifically at the plasma membrane/cell-wall interface of the outer epidermal wall of auxin-treated segments. iv) Peeled segments fail to respond to auxin with proton excretion. This is in contrast to fusicoccin-induced proton excretion and growth which can also be readily demonstrated in the absence of the epidermis. However, peeled and nonpeeled segments show the same sensitivity to protons with regard to the induction of acid-mediated in-vivo elongation and cell-wall extensibility. The observed threshold at pH 4.5–5.0 is too low to be compatible with a second messenger function of protons also in the growth response of the inner tissues. Organ growth is described in terms of a physical model which takes into account tissue tension and extensibility of the outer epidermal wall as the decisive growth parameters. This model states that the wall pressure increment, produced by tissue tension in the outer epidermal wall, rather than the pressure acting on the inner-tissue walls, is the driving force of growth.Abbreviations and symbols E _el, E _pl elastic and plastic in-vitro cell-wall extensibility, respectively - E _tot E _el+E _pl - FC fusicoccin - IAA indole-3-acetic acid - IT inner tissue - ITW inner-tissue walls - OEW outer epidermal wall - osmotic pressure - P wall pressure - water potential