What Do We Know About Metal Recycling Rates?

The recycling of metals is widely viewed as a fruitful sustainability strategy, but little information is available on the degree to which recycling is actually taking place. This article provides an overview on the current knowledge of recycling rates for 60 metals. We propose various recycling metrics, discuss relevant aspects of recycling processes, and present current estimates on global end‐of‐life recycling rates (EOL‐RR; i.e., the percentage of a metal in discards that is actually recycled), recycled content (RC), and old scrap ratios (OSRs; i.e., the share of old scrap in the total scrap flow). Because of increases in metal use over time and long metal in‐use lifetimes, many RC values are low and will remain so for the foreseeable future. Because of relatively low efficiencies in the collection and processing of most discarded products, inherent limitations in recycling processes, and the fact that primary material is often relatively abundant and low‐cost (which thereby keeps down the price of scrap), many EOL‐RRs are very low: Only for 18 metals (silver, aluminum, gold, cobalt, chromium, copper, iron, manganese, niobium, nickel, lead, palladium, platinum, rhenium, rhodium, tin, titanium, and zinc) is the EOL‐RR above 50% at present. Only for niobium, lead, and ruthenium is the RC above 50%, although 16 metals are in the 25% to 50% range. Thirteen metals have an OSR greater than 50%. These estimates may be used in considerations of whether recycling efficiencies can be improved; which metric could best encourage improved effectiveness in recycling; and an improved understanding of the dependence of recycling on economics, technology, and other factors.     

Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

Screening environmental samples for source-specific bacteriophage hosts using a method for the simultaneous pouring of 12 petri plates

A simple apparatus was developed to allow 12 petri plates to be poured simultaneously by hand. It was used when screening bacterial isolates from sewage and dog feces for their ability to detect phages from these sources. This was done to assess the ease with which source-specific phage hosts can be isolated from these sources of fecal pollution. Host bacteria that consistently detected phages from sewage were easily isolated from sewage. These bacterial isolates did not detect phages from dog feces. Host bacteria were not isolated from dog feces even after screening hundreds of colonies from fecal samples from six dogs. Journal of Industrial Microbiology & Biotechnology (2000) 24, 124–126. Received 06 July 1999/ Accepted in revised form 05 November 1999     

The Everyday Life Context of Increasing Energy Demands: Time Use Survey Data in a Decomposition Analysis

Industrial ecologists have modeled with precision the material foundations of industrial systems, but given less attention to the demand for products and the drivers of structural changes in these systems. This article suggests that time use data complement data on monetary expenditure and can be used to elucidate the everyday life context in which the changes in the economy take place. It builds upon the claim that goods are not direct sources of utility, but enter specific household activities as inputs. A second argument for the proposed approach is that it can be used to introduce and foster human agency in analyses of production systems. The article uses Finnish time use survey data, consumption expenditure data, and data on the sectoral energy intensities of financial output in the Finnish economy. First, a measure of the energy intensity of activities is derived by relating consumer time use and the required direct and indirect energy requirements. Second, the results include a decomposition of changes in the energy requirements of private consumption in Finland during the 1990s. It is shown that although the same activities on average require increasing energy inputs per unit of time, Finns have simultaneously changed the structure of their everyday life toward less energy-intensive activities.     

A neutron activation technique for manganese measurements in humans

Manganese (Mn) is an essential element for humans, animals, and plants and is required for growth, development, and maintenance of health. Studies show that Mn metabolism is similar to that of iron, therefore, increased Mn levels in humans could interfere with the absorption of dietary iron leading to anemia. Also, excess exposure to Mn dust, leads to nervous system disorders similar to Parkinson's disease. Higher exposure to Mn is essentially related to industrial pollution. Thus, there is a benefit in developing a clean non-invasive technique for monitoring such increased levels of Mn in order to understand the risk of disease and development of appropriate treatments.To this end, the feasibility of Mn measurements with their minimum detection limits (MDL) has been reported earlier from the McMaster group. This work presents improvement to Mn assessment using an upgraded system and optimized times of irradiation and counting for induced gamma activity of Mn. The technique utilizes the high proton current Tandetron accelerator producing neutrons via the ⁷Li(p,n)⁷Be reaction at McMaster University and an array of nine NaI (Tl) detectors in a 4π geometry for delayed counting of gamma rays. The neutron irradiation of a set of phantoms was performed with protocols having different proton energy, current and time of irradiation. The improved MDLs estimated using the upgraded set up and constrained timings are reported as 0.67 μgMn/gCa for 2.3 MeV protons and 0.71 μgMn/gCa for 2.0 MeV protons. These are a factor of about 2.3 times better than previous measurements done at McMaster University using the in vivo set-up. Also, because of lower dose-equivalent and a relatively close MDL, the combination of: 2.0 MeV; 300 μA; 3 min protocol is recommended as compared to 2.3 MeV; 400 μA; 45 s protocol for further measurements of Mn in vivo.     

Background selection by the peppered moth (Biston betularia Linn.): individual differences

The hypothesis that dimorphically coloured, cryptic moths select appropriate rest sites by comparing their body scales to substrate reflectance was tested using typical and melanic morphs of the peppered moth, Biston betularia (L.). Experiments designed to block the individual's inspection of its inherited colour phenotype do not support Kettlewell's contrast/conflict (self-inspection) hypothesis. Instead, tracking of marked moths over successive days revealed individual differences in rest-site selection which were not related to treatments, experience (imprinting), nor closely to a moth's inherited colour pattern. Differences between family broods indicate that some genetic bias in background selection exists. The production of artificially selected lines with consistent but opposing preferences will allow us to investigate the co-evolution of pattern and behaviour.     

Effect of domestic sewage on sand beach meiofauna at Goa,India

Meiofauna of a sewage-polluted sandy beach, where sand alone constituted > 90%, was surveyed. Nematodes dominated the fauna numerically at all stations, followed by harpacticoid copepods. Most of the animals were confined to the top 5 cm of the sediment. A seasonal pattern was observed in the distribution of the fauna. There were significant spatial and temporal variations in mean meiofauna density, attributed to organic discharge via sewage and prevailing environmental conditions in the study area.     

Industrial melanism in the spittlebug Philaenus spumarius (L) (Homoptera: Aphrophoridae)*

The visible polymorphism of the spittlebug, Philaenus spumarius, has been investigated in the vicinity of a smokeless fuel factory in the Cynon Valley of south Wales. The factory is a significant source of local particulate air pollution. A striking relationship exists between the combined frequencies of the eight dark (melanic) morphs and proximity to the factory. Maximum melanic phenotype frequencies of over 95“, occur in both sexes immediately adjacent to it and decline to levels normal for south Wales 1.5–6 km away, depending on direction. This relationship is largely confined to sites within the valley; samples from adjacent localities outside it have melanic frequencies within normal limits for the south Wales area. Maximum melanic phenotype frequencies in the Cynon Valley are far higher than any known from elsewhere in the species range in Europe, Asia and North America. No consistent difference is apparent in total melanic frequency between males and females at any of the sites in this study. However, marked differences exist between the sexes in the relative contributions of the eight melanic phenotypes to the overall association with the factory. For females the industrial melanism is entirely attributable to the group flanicollis + gibbus + leucocephalus (mainly leucocephalus) whereas in males both this group and the group quadnmaculatus + albomaculatus + leucopthalmus contribute to the relationship. It is suggested that this relationship is due to the selective effects of the local air pollution from the factory. The exact nature of the selection involved is as yet uncertain; it would appear to be strong since the local adaptation involved has developed in a maximum of 40 generations since the factory was opened. Finally, comparison is made with two other insects, a ladybird and a moth, in which high frequencies of melanic forms are also associated with this pollution source.     

Hydroxynitrile lyases: Functions and properties

Plant hydroxynitrile lyases (Hnl) have attracted the attention of bioorganic scientists for more than 90 years. However, the most important increase in knowledge of this class of enzymes has only arisen in the recent decade. The industrial application of these enzymes as biocatalysts for the synthesis of enantiomerically pure α-cyanohydrins may be responsible for the growing interest in this area.
The Hnls are involved in the catabolic degradation of cyanogenic glycosides, releasing HCN which serves as defense agent against herbivores and microbial attack, or as a nitrogen source. Hydroxynitrile lyases from various plant families appear to represent a new example of enzymes that originated from the convergent evolution of different precursor proteins. The enzymes have been classified into non-FAD- and FAD-containing proteins. FAD-containing enzymes have been isolated exclusively from the Rosaceae, whereas the FAD-independent Hnls, which are more heterogenous in structure, have been characterized from various plant families (Poaceae, Euphorbiaceae, Linaceae, Olacaceae. Filitaceae). The aim of this review is to present a general survey of the natural function and localization of this class of enzymes and a comprehensive summary of the biochemical and genetic data of the isolated proteins.     

Keratinolytic fungi in sewage sludge

Sewage sludge from the Upper Silesia Region of Poland were surveyed for keratinolytic fungi. Out of 100 Petri dishes examined, 89 were positive for these micro-organisms. Altogether, 185 fungal appearances belonging to 10 species were observed. Trichophyton terrestre with its teleomorph Arthroderma quadrifidum, T. ajelloi with A. uncinatum, Microsporum gypseum with Arthroderma sp., and Chrysosporium keratinophilum with Aphanoascus keratinophilus prevailed in the sludges. The sewage treatment technologies together with the sludge structure, humidity and pH were found to be critical factors determining the occurrence of keratinolytic fungi in the sludge environment. The qualitative and quantitative composition of keratinolytic fungi could be a useful tool in evaluation of sludge treatment processes.