Seed germination,seedling inoculation and establishment ofAlnus spp. in containers in greenhouse trials

Methods for production of containerized seedlings ofAlnus species were developed which permit nitrogen-fixing nodules to form on the root systems prior to outplanting, in order to provide an early nitrogen input during seedling establishment. The methods are based on procedures for inoculating root systems with suspensions ofFrankia (Actinomycetales), applied either directly in the container cell as a soil drench at the time of seeding, or as a root dip for seedlings transplanted into the containers. Germination of dried, stored seed was enhanced by light and by presoaking for 16 h in water. Pretreatments to overcome seed dormancy or to eliminate fungal pathogens did not further enhance germination. Some loss of seedlings was recorded in the early stages of growth shortly after germination, which is a factor in calculating projected seedling yield. Nodulation and seedling growth were evaluated in terms of growth media characteristics. Seedlings performed well in peat-vermiculite, at soil pH between 5.5 and 8.0.     

Levels of genetic diversity at different stages of the domestication cycle of interior spruce in British Columbia

Concerns over the reductionist nature of the domestication of forest-tree species focus on the possibility of potential genetic erosion during this process. To address these concerns, genetic diversity assessments in a breeding zone the Province of British Columbia “interior” spruce (Picea glauca×engelmanni) program was conducted using allozyme markers. Genetic-variation comparisons were made between natural and production (seed orchard) populations as well as seed and seedling crops produced from the same breeding zone’s seed orchard. The natural population sample consisted of a total of 360 trees representing three stands within each of three watersheds present in the Shuswap-Adams low-elevation zone of interior British Columbia. Small amounts of genetic differentiation were observed among the nine natural populations (4%) and this was attributable to extensive gene flow Consequently, the sum of these nine populations was considered as a baseline for the genetic variation present in the breeding zone. The comparisons between the seed orchard and the breeding zone produced a similar percentage of polymorphic loci while the expected hetrozygosity (0.207 vs 0.210) and the average number of alleles per locus (2.7 vs 2.4) were slightly lower in the seed orchard. A total of seven natural populations’ rare alleles were not present in the orchard population, while one allele was unique to the orchard. The %P increased to 70.6% in the seedlot, but dropped to the natural populations level (64.7%) in the plantation. The observed increase in %P was a result of pollen contamination in the orchard. It is suspected that the reduction in the plantation was caused by an unintentional selection in the nursery. Simulated roguing in the orchard did not drastically reduce even if up to 50% of the orchard’s clones were rogued. However, roguing was associated with a reduction in the average number of alleles per locus (i.e., sampling effect). Received: 2 January 1996 / Accepted: 24 May 1996     

Evaluating effect of arbuscular mycorrhizal fungal consortia and Azotobacter chroococcum in improving biomass yield of Jatropha curcas

This study was conducted to study the long-term impact of bioinoculants, Azotobacter chroococcum and arbuscular mycorrhizal fungi (AMF) on growth and biomass yield of Jatropha curcas grown in nursery and in field conditions. The experiment was set up in a randomized block design, and the following treatments was designed (T₁ = control, T₂ = Azotobacter, T₃ = inoculation with AMF, and T₄ = inoculation with Azotobacter + AMF). Data on various growth attributes (shoot height and shoot diameter) and biochemical parameters [leaf relative water content (LRWC), sugars, protein, and photosynthetic pigments] were recorded up to 6 months in the nursery and in the field (18 months). Results pertaining to morpho-physiological traits showed Azotobacter and AMF consortia increase shoot height, shoot diameter, LRWC, sugars, proteins, and photosynthetic pigments over control under nursery conditions. Besides enhancing the plant growth, these bioinoculants helped in better establishment of Jatropha plants under field conditions. A significant improvement in the shoot height, shoot diameter, fruit yield/plant, and seed yield (g)/plant was evident in 18-month-old Jatropha plants under field conditions when Azotobacter and AMF were co-inoculated. This work supports the application of bioinoculants for establishment of Jatropha curcas in semi-arid regions.     

Genetic variation of liverleaf (Hepatica nobilis Schreb.) in Bavaria against the background of seed transfer guidelines in forestry and restoration

The liver leaf, Hepatica nobilis (Ranunculaceae), is a perennial forest understory herb with specific habitat requirements, which occurs on calcareous soils in beech and oak forests. In Bavaria it can be found, therefore, only in four geographic regions, which are Franconia, the Franconian-Swabian Jura, the prealpine transitions region and the prealpine moraine belt with the Alps. In German forestry, provenance delineations are used since 1987. Similarly for herbs seed provenances and production areas are applied in commercial seed production and restoration. In this study we analyzed whether the genetic variation of H. nobilis reflects the geographic distribution of the species in Bavaria or the provenance delineations used for seed production.We applied AFLPs to study genetic variation within and between 24 populations of H. nobilis.Our analysis revealed high levels of genetic variation within and moderate variation between populations. Variation between seed production areas and seed provenances was low and comparable to the variation between geographic regions. Genetic variation within populations or rare fragments did not differ between production areas, provenances or geographic regions. A significant positive relation of genetic and geographic distances was present within 100 km.Pollination and seed dispersal seem mainly to happen within populations of the myrmecochorous H. nobilis, whereas long-distance dispersal is presumably occasional and random. Our study supports the relevance of dispersal traits for seed collections used in conservation. The protection of historically old beech and oak forests is exceedingly important to preserve the genetic variation of H. nobilis in Bavaria.     

Morpho-colorimetric characterization by image analysis to identify diaspores of wild plant species

Digital images of ex situ germplasm stored in the Sardinian Germplasm Bank (BG-SAR) were used for the application of image analysis techniques at the Stazione Sperimentale di Granicoltura per la Sicilia. The analysed accessions refer to 148 taxonomic units belonging to 102 genera and 47 families, typical of the Sardinian flora, and of the Mediterranean basin in general.The images of diaspores were acquired by a flatbed scanner and elaborated with a macro specially developed for the morphometric and colorimetric measurements. This method allowed carrying out a database for the characterization of autochthonous germplasm in entry to the bank and the realization of statistic classifiers for the discrimination of genera and species within the following families: Apiaceae, Boraginaceae, Caryophyllaceae, Cistaceae, Fabaceae and Scrophulariaceae. Such classifiers, based on the linear discriminant analysis (LDA) technique and checked by cross-validation, showed a performance included between 74.3% and 96.4%.In addition, for the genus Astragalus, it was possible to elaborate a classifier able to identify very similar taxa of a species complex, obtaining a performance between 83.7% and 100%. Such analysis proved the validity of the methodology also from the taxonomic point of view.Suggestions for subsequent methodological progress, which could offer applications in other research issues, such as ecological analysis, soil seed bank and archaeological botany are proposed.     

Biodiversity and ecosystem functioning: It is time for dispersal experiments

The experimental study of the relationship between biodiversity and ecosystem function has mainly addressed the effect of species and number of functional groups. In theory, this approach has mainly focused on how extinction affects function, whereas dispersal limitation of ecosystem function has been rarely discussed. A handful of seed introduction experiments, as well as numerous observations of the effects of long‐distance dispersal of alien species, indicate that ecosystem function may be strongly determined by dispersal limitation at the local, regional and/or global scales. We suggest that it is time to replace biodiversity manipulation experiments, based on random draw of species, with those addressing realistic scenarios of either extinction or dispersal. Experiments disentangling the dispersal limitation of ecosystem function should have to take into account the probability of arrival. The latter is defined as the probability that a propagule of a particular species will arrive at a particular community. Arrival probability depends on the dispersal ability and the number of propagules of a species, the distance a species needs to travel, and the permeability of the matrix landscape. Current databases, in particular those in northwestern and central Europe now enable robust estimation of arrival probability in plant communities. We suggest a general hypothesis claiming that dispersal limitation according to arrival probability will have ecosystem‐level effects different from those arising due to random arrival. This hypothesis may be rendered more region‐, landscape‐ or ecosystem‐specific by estimating arrival probabilities for different background conditions.     

LiGAPS-Beef,a mechanistic model to explore potential and feed-limited beef production 1: model description and illustration

The expected increase in the global demand for livestock products calls for insight in the scope to increase actual production levels across the world. This insight can be obtained by using theoretical concepts of production ecology. These concepts distinguish three production levels for livestock: potential (i.e. theoretical maximum) production, which is defined by genotype and climate only; feed-limited production, which is limited by feed quantity and quality; and actual production. The difference between the potential or limited production and the actual production is the yield gap. The objective of this paper, the first in a series of three, is to present a mechanistic, dynamic model simulating potential and feed-limited production for beef cattle, which can be used to assess yield gaps. A novelty of this model, named LiGAPS-Beef (Livestock simulator for Generic analysis of Animal Production Systems – Beef cattle), is the identification of the defining factors (genotype and climate) and limiting factors (feed quality and available feed quantity) for cattle growth by integrating sub-models on thermoregulation, feed intake and digestion, and energy and protein utilisation. Growth of beef cattle is simulated at the animal and herd level. The model is designed to be applicable to different beef production systems across the world. Main model inputs are breed-specific parameters, daily weather data, information about housing, and data on feed quality and quantity. Main model outputs are live weight gain, feed intake and feed efficiency (FE) at the animal and herd level. Here, the model is presented, and its use is illustrated for Charolais and Brahman × Shorthorn cattle in France and Australia. Potential and feed-limited production were assessed successfully, and we show that FE of herds is highest for breeds most adapted to the local climate conditions. LiGAPS-Beef also identified the factors that define and limit growth and production of cattle. Hence, we argue the model has scope to be used as a tool for the assessment and analysis of yield gaps in beef production systems.     

Variation of Pleurotus ostreatus (Jacq. Ex Fr.) P. Kumm. (1871) performance subjected to differentdoses and timings of nano-urea

Supplementation of the growing substrate by nitrogenous additives has been known to improve the production of oyster mushroom (Pleurotus ostreatus (Jacq. ex Fr.) P. Kumm. (1871)). However, the application of nano-additives has not been reported in such cultivation yet. The study investigated the effect of nano-urea added in two different doses (3 g and 5 g per kg substrate), once (at spawning or after first flush) or twice (at spawning and after first flush) to the growing substrate consisting of wheat straw and spent oyster substrate (1:1, w/w). Results showed that the application of nano-urea once has induced the highest number of mushroom flushes (four flushes) despite the dose applied. Contrarily to early findings, where high doses of nitrogen have caused inhibition of mushroom growth and production, nano-urea application has had better effects when applied twice. With 5 g/kg, it induced the shortest period between the first and the third flush (15 days). With 3 g/kg, it resulted in the highest biological and economic yields at the third flush (332.7 g/bag and 283.1 g/bag respectively), in total (973.4 g/bag and 854.0 g/bag respectively), the highest biological efficiency (109.6%), and pileus diameter/stipe length ratio (2.8). Experimental findings of the current study may be potentially applied at commercial scale.