Seed germination,seedling inoculation and establishment ofAlnus spp. in containers in greenhouse trials

Methods for production of containerized seedlings ofAlnus species were developed which permit nitrogen-fixing nodules to form on the root systems prior to outplanting, in order to provide an early nitrogen input during seedling establishment. The methods are based on procedures for inoculating root systems with suspensions ofFrankia (Actinomycetales), applied either directly in the container cell as a soil drench at the time of seeding, or as a root dip for seedlings transplanted into the containers. Germination of dried, stored seed was enhanced by light and by presoaking for 16 h in water. Pretreatments to overcome seed dormancy or to eliminate fungal pathogens did not further enhance germination. Some loss of seedlings was recorded in the early stages of growth shortly after germination, which is a factor in calculating projected seedling yield. Nodulation and seedling growth were evaluated in terms of growth media characteristics. Seedlings performed well in peat-vermiculite, at soil pH between 5.5 and 8.0.     

Levels of genetic diversity at different stages of the domestication cycle of interior spruce in British Columbia

Concerns over the reductionist nature of the domestication of forest-tree species focus on the possibility of potential genetic erosion during this process. To address these concerns, genetic diversity assessments in a breeding zone the Province of British Columbia “interior” spruce (Picea glauca×engelmanni) program was conducted using allozyme markers. Genetic-variation comparisons were made between natural and production (seed orchard) populations as well as seed and seedling crops produced from the same breeding zone’s seed orchard. The natural population sample consisted of a total of 360 trees representing three stands within each of three watersheds present in the Shuswap-Adams low-elevation zone of interior British Columbia. Small amounts of genetic differentiation were observed among the nine natural populations (4%) and this was attributable to extensive gene flow Consequently, the sum of these nine populations was considered as a baseline for the genetic variation present in the breeding zone. The comparisons between the seed orchard and the breeding zone produced a similar percentage of polymorphic loci while the expected hetrozygosity (0.207 vs 0.210) and the average number of alleles per locus (2.7 vs 2.4) were slightly lower in the seed orchard. A total of seven natural populations’ rare alleles were not present in the orchard population, while one allele was unique to the orchard. The %P increased to 70.6% in the seedlot, but dropped to the natural populations level (64.7%) in the plantation. The observed increase in %P was a result of pollen contamination in the orchard. It is suspected that the reduction in the plantation was caused by an unintentional selection in the nursery. Simulated roguing in the orchard did not drastically reduce even if up to 50% of the orchard’s clones were rogued. However, roguing was associated with a reduction in the average number of alleles per locus (i.e., sampling effect). Received: 2 January 1996 / Accepted: 24 May 1996     

Genetic variation of liverleaf (Hepatica nobilis Schreb.) in Bavaria against the background of seed transfer guidelines in forestry and restoration

The liver leaf, Hepatica nobilis (Ranunculaceae), is a perennial forest understory herb with specific habitat requirements, which occurs on calcareous soils in beech and oak forests. In Bavaria it can be found, therefore, only in four geographic regions, which are Franconia, the Franconian-Swabian Jura, the prealpine transitions region and the prealpine moraine belt with the Alps. In German forestry, provenance delineations are used since 1987. Similarly for herbs seed provenances and production areas are applied in commercial seed production and restoration. In this study we analyzed whether the genetic variation of H. nobilis reflects the geographic distribution of the species in Bavaria or the provenance delineations used for seed production.We applied AFLPs to study genetic variation within and between 24 populations of H. nobilis.Our analysis revealed high levels of genetic variation within and moderate variation between populations. Variation between seed production areas and seed provenances was low and comparable to the variation between geographic regions. Genetic variation within populations or rare fragments did not differ between production areas, provenances or geographic regions. A significant positive relation of genetic and geographic distances was present within 100 km.Pollination and seed dispersal seem mainly to happen within populations of the myrmecochorous H. nobilis, whereas long-distance dispersal is presumably occasional and random. Our study supports the relevance of dispersal traits for seed collections used in conservation. The protection of historically old beech and oak forests is exceedingly important to preserve the genetic variation of H. nobilis in Bavaria.     

Morpho-colorimetric characterization by image analysis to identify diaspores of wild plant species

Digital images of ex situ germplasm stored in the Sardinian Germplasm Bank (BG-SAR) were used for the application of image analysis techniques at the Stazione Sperimentale di Granicoltura per la Sicilia. The analysed accessions refer to 148 taxonomic units belonging to 102 genera and 47 families, typical of the Sardinian flora, and of the Mediterranean basin in general.The images of diaspores were acquired by a flatbed scanner and elaborated with a macro specially developed for the morphometric and colorimetric measurements. This method allowed carrying out a database for the characterization of autochthonous germplasm in entry to the bank and the realization of statistic classifiers for the discrimination of genera and species within the following families: Apiaceae, Boraginaceae, Caryophyllaceae, Cistaceae, Fabaceae and Scrophulariaceae. Such classifiers, based on the linear discriminant analysis (LDA) technique and checked by cross-validation, showed a performance included between 74.3% and 96.4%.In addition, for the genus Astragalus, it was possible to elaborate a classifier able to identify very similar taxa of a species complex, obtaining a performance between 83.7% and 100%. Such analysis proved the validity of the methodology also from the taxonomic point of view.Suggestions for subsequent methodological progress, which could offer applications in other research issues, such as ecological analysis, soil seed bank and archaeological botany are proposed.     

Biodiversity and ecosystem functioning: It is time for dispersal experiments

The experimental study of the relationship between biodiversity and ecosystem function has mainly addressed the effect of species and number of functional groups. In theory, this approach has mainly focused on how extinction affects function, whereas dispersal limitation of ecosystem function has been rarely discussed. A handful of seed introduction experiments, as well as numerous observations of the effects of long‐distance dispersal of alien species, indicate that ecosystem function may be strongly determined by dispersal limitation at the local, regional and/or global scales. We suggest that it is time to replace biodiversity manipulation experiments, based on random draw of species, with those addressing realistic scenarios of either extinction or dispersal. Experiments disentangling the dispersal limitation of ecosystem function should have to take into account the probability of arrival. The latter is defined as the probability that a propagule of a particular species will arrive at a particular community. Arrival probability depends on the dispersal ability and the number of propagules of a species, the distance a species needs to travel, and the permeability of the matrix landscape. Current databases, in particular those in northwestern and central Europe now enable robust estimation of arrival probability in plant communities. We suggest a general hypothesis claiming that dispersal limitation according to arrival probability will have ecosystem‐level effects different from those arising due to random arrival. This hypothesis may be rendered more region‐, landscape‐ or ecosystem‐specific by estimating arrival probabilities for different background conditions.     

Mode of action of a surfactant–polymer formulation to support performance of the entomopathogenic nematode Steinernema carpocapsae for control of diamondback moth larvae (Plutella xylostella)

The use of entomopathogenic nematodes on cabbage leaves against larvae of the diamondback moth (DBM) Plutella xylostella requires the addition of formulation adjuvants to achieve satisfying control. Without adjuvants nematodes settle in the tank mix of backpack sprayers causing uneven distribution. The polymers arabic and guar gum, alginate and xanthan were used in concentrations between 0.05 and 0.3% to retard sedimentation of Steinernema carpocapsae. Arabic gum had no effect, guar gum prevented sedimentation at 0.3% but the effect dropped significantly at lower concentration. At 0.05%, xanthan prevented nematode sedimentation better than alginate. Deposition of nematodes on the leaves was significantly increased by the addition of any of the polymers. Spraying nematodes on leaves with an inclination of 45° without the addition of any formulation resulted in 70% run-off. Adding 0.2% alginate or xanthan reduced the losses to <20%. The use of a surfactant–polymer formulation significantly reduced defoliation by DBM larvae. Visual examinations provided evidence that nematodes are not ingested by DBM larvae. Invasion of S. carpocapsae is an active process via the anus. The function of the formulation is not to prolong nematode survival, but to provide environmental conditions which enable rapid invasion of the nematodes. Nematode performance was improved by selection of the best surfactant in combination with xanthan and by optimisation of the concentrations of the surfactant Rimulgan® and the polymer xanthan. The best control results were achieved with Rimulgan® at 0.3% together with 0.3% xanthan, causing DBM mortality of >90% at 80% relative humidity and >70% at 60%. The formulation lowered the LC₅₀ from 12 to 1 nematode/larva. The viscosity of the surfactant–polymer formulations correlated well with nematode efficacy, prevention of sedimentation and adherence to the leave. This physical parameter can therefore be recommended for improvement of nematode formulations to be used for foliar application against DBM.     

Screening of rice cultivars for Cr-stress response by using the parameters of seed germination,morpho-physiological and antioxidant analysis

Rice is the most important crop for the majority of population across the world with sensitive behavior toward heavy metals such as chromium (Cr) in polluted regions. Although, there is no information on the Cr resistance phenotyping in rice. Herein, two different groups of rice cultivars (normal, and hybrid) were used, each group with 14 different rice cultivars. Firstly, seed germination analysis was conducted by evaluating various seed germination indices to identify the rice cultivars with greatest seed germination vigor. Furthermore, exposure of chromium (Cr) toxicity to 28 different rice varieties (NV1-NV14, HV1-HV14) caused noticeable plant biomass reduction. Subsequently, NV2, NV6, NV10, NV12, NV13 (normal type), HV1, HV4, HV8, and HV9 (hybrid types) were pragmatic as moderately sensitive varieties, while NV3, NV4, NV9, and NV14 (normal type), HV3, HV6, HV7, and HV13 were observed as moderately tolerant. Although, NV7, and HV10 were ranked most sensitive cultivars, and NV11, and HV14 were considered as most tolerant varieties as compared to the other rice (both groups) genotypes. Afterward, Cr induced reduction in chlorophyll pigments were significantly lesser in HV14 relative to NV11, NV7, and especially HV10, and as a result HV14 modulated the total soluble sugar level as well as reduced ROS accumulation, and MDA contents production by stimulating the antioxidant defense mechanism conspicuously which further reduced the electrolyte leakage as well. Our outcomes provide support to explore the Cr tolerance mechanism in cereal crops as well as knowledge about rice breeding with increased tolerance against Cr stress.     

Alginate embedding and subsequent sporulation of in vitro-produced Conidiobolus thromboides hyphae using a pressurised air-extrusion method

Conidiobolus thromboides is an entomophthoralean fungus with potential as a biological control agent of aphids. However, its application in biological control is limited due to its formulation requirements. The objective of this study was to develop and optimise a novel air-extrusion method to embed C. thromboides hyphae at high density in alginate pellets. An orthogonal experimental design was used to investigate selected combinations of parameters known to affect hyphal density within pellets. The diameter of pellets produced, and the calculated density of hyphae within them, ranged from 0.18 ± 0.09 to 3.17 ± 0.06 mm and from 0.02 to 350.56 mg/mm³ respectively. These data were used to predict the optimal parameter combination to deliver the greatest density of hyphae of C. thromboides per pellet: 1% sodium alginate, a 1:2 ratio of hyphae to sodium alginate, an orifice diameter of 0.232 mm and an air pressure of 0.05 MPa. Pellets made under the optimal conditions predicted produced a mean total of 4.3 ± 0.6 × 10⁵ conidia per pellet at 100% relative humidity which was significantly greater than the mean total number of conidia produced from infected aphid cadavers of comparable size (9.35 ± 0.85 × 10⁴) (p < 0.001). In conclusion, air-extrusion embedding appears to be a promising method for formulating in vitro-produced hyphae of C. thromboides for use in biological control.