Influence of spent brewer’s yeast β-glucan on gelatinization and retrogradation of rice starch

The effects of β-glucan (BG) prepared from spent brewer’s yeast on gelatinization and retrogradation of rice starch (RS) were investigated as functions of mixing ratio and of storage time. Results of rapid visco-analysis (RVA) indicated that addition of BG increased the peak, breakdown, setback, and final viscosities, but decreased the pasting temperatures of the rice starch/β-glucan (RS/BG) mixtures. Differential scanning calorimetry (DSC) data demonstrated an increase in onset (T_o), peak (T_p), and conclusion (T_c) temperatures and a decrease in gelatinization enthalpy (ΔH₁) with increasing BG concentration. Storage of the mixed gels at 4 °C resulted in a decrease in T_o, T_p, T_c, and melting enthalpy (ΔH₂). The retrogradation ratio (ΔH₂/ΔH₁) and the phase transition temperature range (T_c − T_o) of the mixed gels increased with storage time, but this effect was reduced by the addition of BG. BG addition also slowed the syneresis of the mixed gels. Results of dynamic viscoelasticity measurement indicated that the addition of BG promoted RS retrogradation at the beginning and then retarded it during longer storage times. The added BG also retarded the development of gel hardness during refrigerated storage of the RS/BG mixed gels.     

Physico-chemical and morphological characteristics of New Zealand Taewa (Maori potato) starches

The physico-chemical, morphological, thermal, pasting, textural, and retrogradation properties of the starches isolated from four traditional Taewa (Maori potato) cultivars (Karuparera, Tutaekuri, Huakaroro, Moemoe) of New Zealand were studied and compared with starch properties of a modern potato cultivar (Nadine). The relationships between the different starch characteristics were quantified using Pearson correlation and principal component analysis. Significant differences were observed among physico-chemical properties such as phosphorus content, amylose content, swelling power, solubility and light transmittance of starches from the different potato cultivars. The starch granule morphology (size and shape) for all the potato cultivars showed considerable variation when studied by scanning electron microscopy and particle size analysis. Starch granules from Nadine and Moemoe cultivars showed the presence of large and irregular or cuboid granules in fairly high number compared with the starches from the other cultivars. The transition temperatures (T_o; T_p; T_c) and the enthalpies (ΔH_gel) associated with gelatinization suggested differences in the stability of the crystalline structures among these potato starches. The Moemoe starch showed the lowest T_o, while it was higher for Tutaekuri and Karuparera starches. Pasting properties such as peak, final and breakdown viscosity and texture profile analysis (TPA) parameters of starch gels such as hardness and fracturability were found to be higher for Nadine and Huakaroro starches. The Nadine and Huakaroro starch gels also had lower tendency towards retrogradation as evidenced by their lower syneresis (%) during storage at 4 °C. Principal component analysis showed that the Tutaekuri and Nadine cultivars differed to the greatest degree in terms of the properties of their starches.     

The effects of electrolysis at room temperature on retrogradation of sweet potato starch

The effects of electrolysis at room temperature on formation of sweet potato retrograded starch were studied by photographic method in the paper. The optimal parameters of electrolytic preparation of sweet potato retrograded starch were determined. The ratio between sweet potato starch and water was 10 g/100 mL with addition of NaCl 1.0 g/100 mL, pH value of the solution was 6.0 and the solution was electrolyzed for 30 min at 90 V at room temperature, then it was stored at 4 °C for 24 h after being autoclaved for 30 min at 120 °C, the retrogradation rate of sweet potato starch at this condition was 33.1%, which is 138% higher than that of control group. Four possible reasons are put forward to explain the results.     

Effect of temperature on gelatinization and retrogradation in high hydrostatic pressure treatment of potato starch-water mixtures

The effect of temperature (20-70 °C) on the gelatinization and retrogradation of potato starch-water mixtures (10-70%, w/w) treated with high hydrostatic pressure (HHP) (400-1000 MPa) was investigated. Gelatinization enthalpy change (ΔH_gel) and re-gelatinization enthalpy change of retrograded crystalline part (ΔH_retro) of the HHP-treated starch were evaluated using differential scanning calorimetry. The value of ΔH_gel of 10-20% (w/w) mixtures decreased with increased pressure and temperature, while ΔH_gel of 30-50% (w/w) mixtures decreased to certain values with increased pressure and the values depended on treatment temperature. With higher temperature and pressure conditions, ΔH_gel of 10-40% (w/w) mixtures reached zero, but ΔH_gel of 50-70% (w/w) mixtures did not. Retrogradation was observed with HHP-treated 20-60% (w/w) mixtures and the value of ΔH_retro depended on the starch content, pressure, and temperature. The value of ΔH_retro trended to increase with increase in starch content. In addition, retrogradation was promoted by HHP treatment at low temperature. Gelatinizaiton and retrogradation behaviors of HHP-treated (400-1000 MPa) potato starch-water mixtures (10-70%, w/w) at 20-70 °C were summerized in a series of state diagrams.     

Studies of the retrogradation process for various starch gels using Raman spectroscopy

The retrogradation of untreated wild-type starches (potato, maize, and wheat), waxy maize starches, and one pregelatinized, modified amylose-rich starch was investigated continuously using Raman spectroscopy. The method detects conformational changes due to the multi-stage retrogradation, the rate of which differs between the starches. The pregelatinized, modified amylose-rich starch shows all stages of retrogradation in the course of its Raman spectra. In comparison to amylose, the retrogradation of amylopectin is faster at the beginning of the measurements and slower in the later stages. The untreated starches can be ranked in the order of their rate of retrogradation as follows: potato>maize>wheat.     

Pasting viscosity and in vitro digestibility of retrograded waxy and normal corn starch powders

Pasting viscosity and in vitro digestibility of oven-dried powders of waxy and normal corn starch gels (40% solids) retrograded under an isothermal (4 °C) or temperature cycled (4/30 °C) storage were investigated. Temperature cycling induced higher onset temperature for melting of amylopectin crystals than isothermal storage under a differential scanning calorimeter whereas little difference in crystalline type was observed under X-ray diffraction analysis. Temperature cycling caused higher pasting temperature and viscosity for the retrograded starches than isothermal storage. The retrograded waxy corn starch powders exhibited pasting behaviors similar to that of native waxy corn starch. However, the retrograded normal corn starch powders showed very much different pasting patterns with lower pasting viscosity but higher pasting temperature than native starch counterpart. The retrogradation increased slowly digestible starch content without changing resistant starch content, more effectively by the temperature cycling than the isothermal storage.     

Pressurized solvent extraction of pure food grade starch

A commercial pressurized solvent extractor was used to remove lipid and non-lipid material from cornstarch using n-propanol/water and ethanol/water mixtures. Yields and chemical composition of the extract fractions were determined. Cornstarch samples were characterized using pasting properties and shear storage modulus measurements. The n-propanol/water extracted slightly higher amounts of both lipids and non-lipids. The lipid fractions contained mostly linoleic, palmitic and oleic free fatty acids. The non-lipid fraction contained mostly protein in the form of zein. The extracted starch had lower peak and setback viscosities than did the unextracted starch. The starch extracted with n-propanol/water had the lowest shear storage modulus values. Conversely, the samples extracted with ethanol/water had the highest shear storage modulus values. It is hypothesized that low amounts of zein present in conjunction with the starch is responsible for this observed effect.     

Retrogradation of corn starch after thermal treatment at different temperatures

Multi-endotherms of the gelatinization of corn starch, such as G, M1, M2, and Z endotherms, have been detected by DSC. The retrogradation of corn starch after initial thermal treatment at different temperatures was studied by DSC; in particular, the effect of thermal treatment before and after each endotherm of gelatinization on retrogradation was determined as a function of annealing time. The effect of thermal treatment at a certain temperature on the residual gelatinization endotherm at a higher temperature is also discussed. It was found that the higher temperature of thermal treatment always removed all the endotherms below that temperature. However, a certain thermal treatment temperature could affect the residual endotherm above this treatment temperature. The time-dependent retrogradation of corn starch is mainly due to G and M1 endotherms. The temperature and enthalpy of the melting of amylose–lipid complexes M2 and nonlipid complex amylose Z were not affected by aging time. The final enthalpy of retrogradation was found to be lower than that of gelatinization.     

Crystallinity and structure of starch using wide angle X-ray scattering

Wide angle X-ray diffraction was used to evaluate the crystalline fraction of a variety of starches, using preliminary smoothing then an iterative smoothing algorithm to estimate amorphous background scattering. This methodology was then used to determine initial crystallinity and monitor gelation and retrogradation of high amylose thermoplastic starch used to produce film. Retrogradation was monitored over a 5-day period. It was found that the starch film retrograded rapidly over the first 12 h with the film displaying both B-type crystallinity and long range amorphous ordering that were separately quantitatively calculated. Changes in starch films, including complete or partial gelatinization, retrogradation and crystallinity, were all determined through wide angle X-ray diffraction.     

Starches from different botanical sources I: Contribution of amylopectin fine structure to thermal properties and enzyme digestibility

Fifteen starches from different botanical sources were selected to study the influence of structural features on thermal properties and enzyme digestibility. Morphological appearance, X-ray diffraction pattern, apparent amylose content, unit-chain length distribution of amylopectin, thermal properties and enzyme digestibility of starch varied with botanical source. It was demonstrated that the distribution of unit-chains of amylopectin significantly correlated with functional properties of the starches. Gelatinization temperature of native and retrograded starches decreased and increased with a relative abundance of unit-chains with an approximate degree of polymerization (DP) of 8–12 and 16–26, respectively (P<0.01). Similar unit-chain lengths also affected the enzyme digestibility of starch granules (P<0.01).