Identification of soil quality indicators for assessing the effect of different tillage practices through a soil quality index in a semi-arid environment

Tillage is known to potentially affect soil quality in various ways. In this study, a soil quality index (SQI) was developed by quantifying several soil attributes either sensitive or insensitive to physical disturbance, using factor analysis as a dimension reduction technique, in order to discriminate different tillage systems. Soil properties including physical (MWD), chemical (pH, organic C, total N, available P and POM contents) and microbial (MBC, MBN, PCM, PNM and three enzymes) parameters were measured to establish a minimum data set (MDS) for the assessment of overall SQI. The soil attributes were determined on samples (0–20 cm depth) collected under moldboard (MP) and disk (DP) plows as conventional tillage (CT), and rotary (RP) and chisel (CP) plows as reduced tillage (RT) systems with a similar plant C input rate and cover crop over a period of six years (2005–2011) in a semi-arid calcareous soil (Calcixerepts) from Central Iran. Results indicated a clear difference in soil quality among the tillage systems with a significant increase of SQI under RT over time, particularly under CP practices. Although RT improved most soil microbial attributes, not all attributes contributed to SQI because of their close interrelationship. The final SQI consisted only of geometric mean of microbial activity (GMA, the square root of the product of PCM and PNM) and geometric mean of enzyme activity (GME, the cube root of the product of enzyme activities). Soil GME and GMA were found to be as key indicators contributing 55% and 36% to SQI, respectively. Therefore, the GME and GMA were the most important indicators effectively discriminating tillage systems, and could be used to monitor the enhancement of soil quality under RT in this semiarid environment. The influence of tillage year on SQI was greater than that of tillage practices. In conclusion, RT systems were characterized by a higher value of SQI, suggesting a good recovery of soil capacity and functions after abandoning CT in the studied area. Smallholder farmers should therefore be aware of the potential for high soil quality in future as a result of continuing RT systems, especially with surface tillage using CP practices.     

Development of PEGylated serum albumin with multiple reduced thiols as a long-circulating scavenger of reactive oxygen species for the treatment of fulminant hepatic failure in mice

Reactive oxygen species (ROS) are involved in the pathophysiology of fulminant hepatic failure. Therefore, we developed polyethylene glycol-conjugated bovine serum albumin with multiple reduced thiols (PEG-BSA-SH) for the treatment of fulminant hepatic failure. As a long-circulating ROS scavenger, PEG-BSA-SH effectively scavenged highly reactive oxygen species and hydrogen peroxide in buffer solution. PEG-BSA-SH showed a long circulation time in the plasma after intravenous injection into mice. Fulminant hepatic failure was induced by intraperitoneal injection of lipopolysaccharide and d-galactosamine (LPS/d-GalN) into mice. The LPS/d-GalN-induced elevation of plasma alanine aminotransferase (ALT) and aspartate aminotransferase (AST) levels was significantly inhibited by a bolus intravenous injection of PEG-BSA-SH. Furthermore, the changes in hepatic lipid peroxide and hepatic blood flow were effectively suppressed by PEG-BSA-SH. In contrast, l-cysteine, glutathione, and dithiothreitol, three traditional reduced thiols, had no statistically significant effects on the serum levels of ALT or AST. These findings indicate that PEG-BSA-SH is a promising ROS scavenger and useful in the treatment of fulminant hepatic failure.     

A method for determining overall protein fold from NMR distance restraints

Summary We describe a simple method for determining the overall fold of a polypeptide chain from NOE-derived distance restraints. The method uses a reduced representation consisting of two particles per residue, and a force field containing pseudo-bond and pseudo-angle terms, an electrostatic term, but no van der Waals or hard shell repulsive terms. The method is fast and robust, requiring relatively few distance restraints to approximate the correct fold, and the correct mirror image is readily determined. The method is easily implemented using commercially available molecular modeling software.     

A triple-resonance pulse scheme for selectively correlating amide1HN and15N nuclei with the1Hα proton of the preceding residue

Summary A 3D¹H–¹⁵N–¹³C triple resonance experiment is presented that contains exclusively cross peaks between the¹H^N and¹⁵N nuclei of one residue with the H of the preceding residue. The pulse sequence, designed to minimize the time coherence, is transverse on nuclei with short T₂ values. The experiment consists of coherence transfers via one-bond couplings from the H^N via N, CO, C to the H and back to the H^N for detection; it is called HN(COCA)HA. The experiment was tested on uniformly¹⁵N- and¹³C-enriched T4 lysozyme.     

Multiple alanine replacements within alpha-helix 126-134 of T4 lysozyme have independent, additive effects on both structure and stability.

In a systematic attempt to identify residues important in the folding and stability of T4 lysozyme, five amino acids within alpha-helix 126-134 were substituted by alanine, either singly or in selected combinations. Together with three alanines already present in the wild-type structure this provided a set of mutant proteins with up to eight alanines in sequence. All the variants behaved normally, suggesting that the majority of residues in the alpha-helix are nonessential for the folding of T4 lysozyme. Of the five individual alanine substitutions it is inferred that four result in slightly increased protein stability and one, the replacement of a buried leucine with alanine, substantially decreased stability. The results support the idea that alanine is a residue of high helix propensity. The change in protein stability observed for each of the multiple mutants is approximately equal to the sum of the energies associated with each of the constituent substitutions. All of the variants could be crystallized isomorphously with wild-type lysozyme, and, with one trivial exception, their structures were determined at high resolution. Substitution of the largely solvent-exposed residues Asp 127, Glu 128, and Val 131 with alanine caused essentially no change in structure except at the immediate site of replacement. Substitutions of the partially buried Asn 132 and the buried Leu 133 with alanine were associated with modest (< or = 0.4 A) structural adjustments. The structural changes seen in the multiple mutants were essentially a combination of those seen in the constituent single replacements. The different replacements therefore act essentially independently not only so far as changes in energy are concerned but also in their effect on structure. The destabilizing replacement Leu 133-->Ala made alpha-helix 126-134 somewhat less regular. Incorporation of additional alanine replacements tended to make the helix more uniform. For the penta-alanine variant a distinct change occurred in a crystal-packing contact, and the "hinge-bending angle" between the amino- and carboxy-terminal domains changed by 3.6 degrees. This tends to confirm that such hinge-bending in T4 lysozyme is a low-energy conformational change.     

X-ray structure of Glu 53 human lysozyme.

The three-dimensional structure of a modified human lysozyme (HL), Glu 53 HL, in which Asp 53 was replaced by Glu, has been determined at 1.77 A resolution by X-ray analysis. The backbone structure of Glu 53 HL is essentially the same as the structure of wild-type HL. The root mean square difference for the superposition of equivalent C alpha atoms is 0.141 A. Except for the Glu 53 residue, the structure of the active site region is largely conserved between Glu 53 HL and wild-type HL. However, the hydrogen bond network differs because of the small shift or rotation of side chain groups. The carboxyl group of Glu 53 points to the carboxyl group of Glu 35 with a distance of 4.7 A between the nearest carboxyl oxygen atoms. A water molecule links these carboxyl groups by a hydrogen bond bridge. The active site structure explains well the fact that the binding ability for substrates does not significantly differ between Glu 53 HL and wild-type HL. On the other hand, the positional and orientational change of the carboxyl group of the residue 53 caused by the mutation is considered to be responsible for the low catalytic activity (ca. 1%) of Glu 53 HL. The requirement of precise positioning for the carboxyl group suggests the possibility that the Glu 53 residue contributes more than a simple electrostatic stabilization of the intermediate in the catalysis reaction.     

Identification of an insertion sequence, IS1081, in Mycobacterium bovis

Abstract: An insertion sequence, IS1081, in the genome of Mycobacterium bovis has been identified and sequenced. It is 1324 bp long with 15 bp inverted repeat ends and contains a large ORF. There are six copies of IS1081 in the genome of M. bovis and the element is also present in Mycobacterium tuberculosis . IS1081 is not closely related to other DNA elements described in actinomycetes but its putative transposase bears some resemblance to that of IS256 from Staphylococcus aureus . IS1081 may be useful for genetic manipulations and for developing a diagnostic test for bovine tuberculosis based on the polymerase chain reaction.     

Phosphate sorption isotherms for evaluating phosphorus requirement of wetland rice soils

Summary Phosphate sorption isotherms were developed for five Philippine wetland rice soils using the conventional technique and a modified one. In the conventional method, P requirements of soils varied between 280 and 810 g P/g soil. In the modified method, they varied from 160 to 540 g P/g soil at 0.2 ppm P in solution. Soils with high P-sorption capacities had vermiculite and halloysite as the dominant clay minerals. Soil reduction by flooding decreased P-sorption by 28–70 percent at 0.2 ppm P in solution. The decrease in P-sorption due to soil reduction was greatest in a crystalline soil with vermiculite and halloysite as the dominant clay minerals and least in a soil with dominant X-ray amorphous silicates in the clay fraction.Desorption of freshly adsorbed P under reduction was greater in HCO ₃ ^– solution than in CaCl₂ and it increased with level of applied P. Desorption patterns of freshly adsorbed P were similar to adsorption patterns but values of P in solution were lower at desorption. Soils varied with respect to desorption of freshly sorbed P. Desorption studies indicate that soils vary in intensity factor with respect to P and thus influence P availability to plants. Use of P-sorption and P-desorption data obtained under reduced soil condition was proposed for detecting P needs of submerged rice soils.Results of a pot study with IR36 at different levels of solution P (reduced) in one soil indicated a high degree of correlation between adjusted P levels and the measured growth parameters. About 0.12 ppm P in the soil solution or 0.46 ppm P desorbed in HCO ₃ ^– solution (equivalent to 100 mg P/kg soil) was adequate for near-maximum plant height, tiller production, total dry matter yield, plant P content, and total P uptake.     

Low synonymous site variation at thelacY locus inEscherichia coli suggests the action of positive selection

We have determined the nucleotide sequences of sevenlacY alleles isolated from natural isolates ofEscherichia coli. Nucleotide heterozygosity estimates for this locus were compared to those obtained from previous studies of intraspecific variation at chromosomal loci, revealing thatlacY has unusually low synonymous site variation. The average pairwise heterozygosity of synonymous sites (Ks=0.0112+/-0.0100) is the second lowest reported and the lowest for loci that have an equivalent level of nonsynonymous variation. We consider several hypotheses to explain how different forces in evolution could act to create the observed pattern of polymorphism, including selection for translational efficiency and positive selection. Our analysis most strongly supports the hypothesis that positive selection has acted on thelacY locus inE. coli.     

Reduced glutathione esters—antidotes to toxicity. Cytotoxicity induced by hydrogen peroxide, 1-chloro-2,4-dinitrobenzene,and menadione in murine P388D1 macrophages in vitro

Repletion of depleted cellular reduced glutathione (GSH) levels in oxidative stress and exposure to arylating agents is a strategy for the development of antidotes to chemical toxicity. The effect of GSH, reduced glutathione ethyl monoester (GSHEt), and reduced glutathione ethyl diester (GSHEt₂) on the cytotoxicity of hydrogen peroxide, 1-chloro-2,4-dinitrobenzene (CDNB), and menadione to P388D₁ macrophages in vitro was investigated. The median toxic concentration TC₅₀ values of the toxicants were hydrogen peroxide 24 ± 2 mM (N = 19), CDNB 63 ± 6 μM (N = 18), and menadione 30 ± 4 μM (N = 22). Reduced glutathione, GSHEt, and GSHEt₂ were poor antidotes to hydrogen peroxide toxicity. Indeed, the observed antidote effects were attributed to the nonenzymatic reaction of the GSH derivatives with hydrogen peroxide in the extracellular medium. Reduced glutathione ethyl diester was a more potent antidote of CDNB- and menadione-mediated toxicity than GSHEt and GSH. For cell incubations with the approximate median toxic concentration TC₅₀ values of hydrogen peroxide, CDNB, and menadione, the respective median effective antidote concentration EC₅₀ values were GSHEt 23.8 ± 4.1 mM (N = 9), 3.6 ± 0.6 mM (N = 11), and 226 ± 93 μM (N = 12); and GSHEt₂ 20.4 ± 1.9 mM (N = 6), 603 ± 2 μM (N = 9), and 7.6 ± 2.3 μM (N = 12). Reduced glutathione ethyl diester was a potent antidote to CDNB- and menadione-induced toxicities but not to hydrogen peroxide-induced toxicity under acute intoxication conditions. © 1996 John Wiley & Sons, Inc.