Ecological interactions in Aedes species on Reunion Island

Two invasive, container‐breeding mosquito species, Aedes aegypti (Stegomyia aegypti) and Aedes albopictus (Stegomyia albopicta) (Diptera: Culicidae), have different distribution patterns on Reunion Island. Aedes albopictus occurs in all areas and Ae. aegypti colonizes only some restricted areas already occupied by Ae. albopictus. This study investigates the abiotic and biotic ecological mechanisms that determine the distribution of Aedes species on Reunion Island. Life history traits (duration of immature stages, survivorship, fecundity, estimated finite rate of increase) in Ae. aegypti and Ae. albopictus were compared at different temperatures. These fitness measures were characterized in both species in response to competitive interactions among larvae. Aedes aegypti was drastically affected by temperature, performing well only at around 25 °C, at which it achieved its highest survivorship and greatest estimated rate of increase. The narrow distribution of this species in the field on Reunion Island may thus relate to its poor ability to cope with unfavourable temperatures. Aedes aegypti was also more negatively affected by high population densities and to some extent by interactions with Ae. albopictus, particularly in the context of limited food supplies. Aedes albopictus exhibited better population performance across a range of environmental conditions. Its ecological plasticity and its superior competitive ability relative to its congener may further enhance its invasion success on Reunion Island.     

What Do We Know About Metal Recycling Rates?

The recycling of metals is widely viewed as a fruitful sustainability strategy, but little information is available on the degree to which recycling is actually taking place. This article provides an overview on the current knowledge of recycling rates for 60 metals. We propose various recycling metrics, discuss relevant aspects of recycling processes, and present current estimates on global end‐of‐life recycling rates (EOL‐RR; i.e., the percentage of a metal in discards that is actually recycled), recycled content (RC), and old scrap ratios (OSRs; i.e., the share of old scrap in the total scrap flow). Because of increases in metal use over time and long metal in‐use lifetimes, many RC values are low and will remain so for the foreseeable future. Because of relatively low efficiencies in the collection and processing of most discarded products, inherent limitations in recycling processes, and the fact that primary material is often relatively abundant and low‐cost (which thereby keeps down the price of scrap), many EOL‐RRs are very low: Only for 18 metals (silver, aluminum, gold, cobalt, chromium, copper, iron, manganese, niobium, nickel, lead, palladium, platinum, rhenium, rhodium, tin, titanium, and zinc) is the EOL‐RR above 50% at present. Only for niobium, lead, and ruthenium is the RC above 50%, although 16 metals are in the 25% to 50% range. Thirteen metals have an OSR greater than 50%. These estimates may be used in considerations of whether recycling efficiencies can be improved; which metric could best encourage improved effectiveness in recycling; and an improved understanding of the dependence of recycling on economics, technology, and other factors.     

Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

Autumnal moth – why autumnal?

1. As for some other spring‐feeding moths, adult flight of Epirrita autumnata (Lepidoptera: Geometridae) occurs in late autumn. Late‐season flight is a result of a prolonged pupal period. Potential evolutionary explanations for this phenological pattern are evaluated. 2. In a laboratory rearing, there was a weak correlation between pupation date and the time of adult emergence. A substantial genetic difference in pupal period was found between two geographic populations. Adaptive evolution of eclosion time can thus be expected. 3. Metabolic costs of a prolonged pupal period were found to be moderate but still of some ecological significance. Pupal mortality is likely to form the main cost of the prolonged pupal period. 4. Mortality rates of adults, exposed in the field, showed a declining temporal trend from late summer to normal eclosion time in autumn. Lower predation pressure on adults may constitute the decisive selective advantage of late‐season flight. It is suggested that ants, not birds, were the main predators responsible for the temporal trend. 5. Egg mortality was estimated to be low; it is thus unlikely that the late adult period is selected for to reduce the time during which eggs are exposed to predators. 6. In a laboratory experiment, oviposition success was maximal at the time of actual flight peak of E. autumnata, however penalties resulting from sub‐optimal timing of oviposition remained limited.     

The cost of mutualism in a fly-fungus interaction

The movement ability of individuals has become increasingly important to a variety of ecological questions. In this study, I investigate how plant structure and changes in body size through development affect the movement ability of a predaceous stinkbug, Podisus maculiventris, on three species of goldenrod (Solidago spp.) representing a wide range of surface complexities. I adapt existing techniques for quantifying movement in two dimensions to the study of movement on natural plant structures in three dimensions. These experiments indicate that plant structure and insect size are significant factors affecting the movement ability of P. maculiventris. Changes in movement ability due to factors of ontogeny and different habitat structures suggest that the scale of an individual’s ambit or ecological sphere of influence may vary within its lifespan. Considering the influence of ontogeny and habitat structure on movement ability may be useful to investigations of population dynamics, foraging behavior, and pest management. Received: 14 July 1999 / Accepted: 23 March 2000     

Plant litter feedback and population dynamics in an annual plant,<Emphasis Type="Italic"> Cardamine pensylvanica</Emphasis>

The presence of litter has the potential to alter the population dynamics of plants. In this paper, we explore the effects of litter on population dynamics using a simple experimental laboratory system with populations of the annual crucifer, Cardamine pensylvanica. Using a factorial experiment with four densities and three litter levels, we determined the effect of litter on biomass and plant fecundity, and the life stages responsible for these changes in yield. Although litter had significant effects on seed germination and on seedling survivorship, we show, using a population dynamics model, that these effects were not demographically significant. Rather, the potential effect of litter on population dynamics resulted almost entirely from its effect on biomass. Persistent litter suppressed plant biomass and apparently removed the direct density effect present in the absence of litter. Thus, litter changed the shape of the recruitment curve from slightly humped to asymptotic. In addition to changing the shape of the recruitment curve, litter reduced the carrying capacity of the populations. Thus, the population dynamics model indicated that not all statistically significant responses were dynamically significant. Given the potential complexity of litter effects, simple population models provide a powerful tool for understanding the potential consequences of short-term responses. Received: 8 September 1999 / Accepted: 5 April 2000     

Effect of different larval rearing temperatures on the productivity (Ro) and morphology of the malaria vector Anopheles superpictus Grassi (Diptera: Culicidae) using geometric morphometrics

Temperature affects both the biology and morphology of mosquito vectors. Geometric morphometrics is a useful new tool for capturing and analyzing differences in shape and size in many morphological parameters, including wings. We have used this technique for capturing the differences in the wings of the malaria vector Anopheles superpictus, using cohorts reared at six different constant temperatures (15°, 20°, 25°, 27°, 30°, and 35° C) and also searched for potential correlations with the life tables of the species. We studied wing shape in both male and female adults, using 22 landmarks on the wing in relation to ecological parameters, including the development rate. The ecological zero was calculated as 9.93° C and the thermal constant as 296.34 day‐degrees. The rearing temperature affects egg, larval, and pupal development and also the total time from egg to adult. As rearing temperatures increased, longevity decreased in both sexes. In An. superpictus, R_o value and productivity correlated with the statistically significant gradual deformations in the wing shape related to size in both sexes. These deformations directly linked to differences in immature rearing temperatures. Analysis using PCA and UPGMA phenograms showed that although wings of females became narrower dorsoventrally as the temperature increased, they became broader in males. Comparisons of the wing landmarks indicated the medial part of the wing was most affected by larval rearing temperatures, showing relatively more deformations. Algorithmic values of the life tables were determined in correlation with the results of geometric morphometrics. Comparisons of centroid sizes in the cohorts showed that overall wing size became smaller in both sexes in response to higher rearing temperatures.     

Internal lipid synthesis and vesicle growth as a step toward self-reproduction of the minimal cell

One of the major properties of the semi-synthetic minimal cell, as a model for early living cells, is the ability to self-reproduce itself, and the reproduction of the boundary layer or vesicle compartment is part of this process. A minimal bio-molecular mechanism based on the activity of one single enzyme, the FAS-B (Fatty Acid Synthase) Type I enzyme from Brevibacterium ammoniagenes, is encapsulated in 1-palmitoyl-2oleoyl-sn-glycero-3-phosphatidylcholine (POPC) liposomes to control lipid synthesis. Consequently molecules of palmitic acid released from the FAS catalysis, within the internal lumen, move toward the membrane compartment and become incorporated into the phospholipid bilayer. As a result the vesicle membranes change in lipid composition and liposome growth can be monitored. Here we report the first experiments showing vesicles growth by catalysis of one enzyme only that produces cell boundary from within. This is the prototype of the simplest autopoietic minimal cell.     

Resprouting in the Mediterranean‐type shrub Erica australis afffected by soil resource availability

Abstract. Soil resource availability may affect plant regeneration by resprouting in disturbed environments directly, by affecting plant growth rates, or indirectly by determining allocation to storage in the resprouting organs. Allocation to storage may be higher in stressful, low resource‐supply soils, but under such conditions plant growth rates may be lower. These factors could act in opposite directions leading to poorly known effects on resprouting. This paper analyses the role played by soil resources in the production and growth of resprouts after removal of above‐ground plant tissues in the Mediterranean shrub Erica australis. At 13 sites, differing in substrate, we cut the base of the stems of six plants of E. australis and allowed them to resprout and grow for two years. Soils were chemically analysed and plant water potential measured during the summer at all sites to characterize soil resource availability. We used stepwise regression analysis to determine the relationships between the resprouting response [mean site values of the number of resprouts (RN), maximum length (RML) and biomass (RB)] and soil nutrient content and plant water potential at each site. During the first two years of resprouting there were statistically significant differences among sites in the variables characterizing the resprouting response. RML was always different among sites and had little relationship with lignotuber area. RN was less different among sites and was always positively correlated with lignotuber area. RB was different among sites after the two years of growth. During the first months of resprouting, RN and RML were highly and positively related to the water status of the plant during summer. At later dates soil fertility variables came into play, explaining significant amounts of variance of the resprouting variables. Soil extractable cations content was the main variable accounting for RML and RB. Our results indicate that resprout growth of E. australis is positively affected by high water availability at the beginning of the resprouting response and negatively so by high soil extractable cation content at later periods. Some of these factors had previously shown to be related, with an opposite sign, to the development of a relatively larger lignotuber. Indeed, RML and RB measured in the second year of resprouting were significantly and negatively correlated with some indices of biomass allocation to the lignotuber at each site. This indicates that sites favouring allocation to the resprouting organ may not favour resprout growth.