Age-related variability in occlusal wear planes

Investigation of two populations of 136 individuals shows several patterns of occlusal wear plane change which are positively correlated with age. For individuals up to the age of 18, there is a characteristic pattern in which the occlusal wear planes of the mandibular teeth are lingually sloped and those of the maxillary dentition buccally sloped, with the exception of the maxillary premolars, which are also lingually sloped. The long axes of the mandibular teeth give them a lingual orientation relative to the maxillary teeth, and the long axes of the maxillary molars, by contrast, are buccally oriented. In the 18-30 age range for all sexes, the mandibular M1 becomes buccally sloped on its occlusal surface while the occlusal wear plane on the maxillary M1 becomes lingually sloped. Later age changes indicate a trend for the mandibular premolars to become buccally sloped, while the wear planes of the maxillary premolars remain lingually sloped. There is a corresponding tendency for the maxillary and mandibular second molars to undergo changes in the initial orientation of the occlusal wear planes.     

Influence of the host plant on occluded virus production and lethal infectivity of a baculovirus

Intra- and inter-specific effects of cotton, soybean, and clover on the time until death of Helicoverpa zea (Boddie) and Heliothis virescens (F.) larvae lethally infected with H. zea nucleopolyhedrovirus (HzSNPV) were evaluated in the laboratory. In the first test, on second instar only, the time until death of lethally infected larvae of both species differed with the plant tissues (vegetative or reproductive) and plant species. The total viral activity produced per larva in LC(50) units (occluded viral bodies (OBs) per larva/LC(50) in OBs/mm(2) of diet surface) was greater from H. virescens larvae fed vegetative than reproductive tissues of all host plants, but from H. zea virus production was greater only when fed vegetative tissue of soybean. In a second test that compared second and fourth instar H. virescens on cotton, total viral activity from larvae treated in both instars was greater when fed vegetative than reproductive tissues. Results of these tests suggest that the ability of host plants to influence baculovirus disease is more complex than previously believed. When examining the epizootic potential of a baculovirus, more attention must be given to the effects of the host plant on the insect-virus interactions.     

Essential Role of the CBD1-CBD2 Linker in Slow Dissociation of Ca2+ from the Regulatory Two-domain Tandem of NCX1

In NCX proteins CBD1 and CBD2 domains are connected through a short linker (3 or 4 amino acids) forming a regulatory tandem (CBD12). Only three of the six CBD12 Ca²⁺-binding sites contribute to NCX regulation. Two of them are located on CBD1 (K_d = ∼0.2 μm), and one is on CBD2 (K_d = ∼5 μm). Here we analyze how the intrinsic properties of individual regulatory sites are affected by linker-dependent interactions in CBD12 (AD splice variant). The three sites of CBD12 and CBD1 + CBD2 have comparable K_d values but differ dramatically in their Ca²⁺ dissociation kinetics. CBD12 exhibits multiphasic kinetics for the dissociation of three Ca²⁺ ions (k_r = 280 s⁻¹, k_f = 7 s⁻¹, and k_s = 0.4 s⁻¹), whereas the dissociation of two Ca²⁺ ions from CBD1 (k_f = 16 s⁻¹) and one Ca²⁺ ion from CBD2 (k_r = 125 s⁻¹) is monophasic. Insertion of seven alanines into the linker (CBD12–7Ala) abolishes slow dissociation of Ca²⁺, whereas the kinetic and equilibrium properties of three Ca²⁺ sites of CBD12–7Ala and CBD1 + CBD2 are similar. Therefore, the linker-dependent interactions in CBD12 decelerate the Ca²⁺ on/off kinetics at a specific CBD1 site by 50–80-fold, thereby representing Ca²⁺ “occlusion” at CBD12. Notably, the kinetic and equilibrium properties of the remaining two sites of CBD12 are “linker-independent,” so their intrinsic properties are preserved in CBD12. In conclusion, the dynamic properties of three sites are specifically modified, conserved, diversified, and integrated by the linker in CBD12, thereby generating a wide range dynamic sensor.     

Direct Pressure Monitoring Accurately Predicts Pulmonary Vein Occlusion During Cryoballoon Ablation

Cryoballoon ablation (CBA) is an established therapy for atrial fibrillation (AF). Pulmonary vein (PV) occlusion is essential for achieving antral contact and PV isolation and is typically assessed by contrast injection. We present a novel method of direct pressure monitoring for assessment of PV occlusion.Transcatheter pressure is monitored during balloon advancement to the PV antrum. Pressure is recorded via a single pressure transducer connected to the inner lumen of the cryoballoon. Pressure curve characteristics are used to assess occlusion in conjunction with fluoroscopic or intracardiac echocardiography (ICE) guidance. PV occlusion is confirmed when loss of typical left atrial (LA) pressure waveform is observed with recordings of PA pressure characteristics (no A wave and rapid V wave upstroke). Complete pulmonary vein occlusion as assessed with this technique has been confirmed with concurrent contrast utilization during the initial testing of the technique and has been shown to be highly accurate and readily reproducible.We evaluated the efficacy of this novel technique in 35 patients. A total of 128 veins were assessed for occlusion with the cryoballoon utilizing the pressure monitoring technique; occlusive pressure was demonstrated in 113 veins with resultant successful pulmonary vein isolation in 111 veins (98.2%). Occlusion was confirmed with subsequent contrast injection during the initial ten procedures, after which contrast utilization was rapidly reduced or eliminated given the highly accurate identification of occlusive pressure waveform with limited initial training.Verification of PV occlusive pressure during CBA is a novel approach to assessing effective PV occlusion and it accurately predicts electrical isolation. Utilization of this method results in significant decrease in fluoroscopy time and volume of contrast.     

Acute impact of blood flow restriction on strength-endurance performance during the bench press exercise

The main goal of the present study was to evaluate the acute effects of blood flow restriction (BFR) at 70% of full arterial occlusion pressure on strength-endurance performance during the bench press exercise. The study included 14 strength-trained male subjects (age = 25.6 ± 4.1 years; body mass = 81.7 ± 10.8 kg; bench press 1 repetition maximum (1RM) = 130.0 ± 22.1 kg), experienced in resistance training (3.9 ± 2.4 years). During the experimental sessions in a randomized crossover design, the subjects performed three sets of the bench press at 80% 1RM performed to failure with two different conditions: without BFR (CON); and with BFR (BFR). Friedman’s test showed significant differences between BFR and CON conditions for the number of repetitions performed (p < 0.001); for peak bar velocity (p < 0.001) and for mean bar velocity (p < 0.001). The pairwise comparisons showed a significant decrease for peak bar velocity and mean bar velocity in individual Set 1 for BFR when compared to CON conditions (p = 0.01 for both). The two-way repeated measures ANOVA showed a significant main effect for the time under tension (p = 0.02). A post-hoc comparisons for the main effect showed a significant increase in time under tension for BFR when compared to CON (p = 0.02). The results of the presented study indicate that BFR used during strength-endurance exercise generally does not decrease the level of endurance performance, while it causes a drop in bar velocity.     

Longitudinal study of dental arch relationships in Australian aboriginals with reference to alternate intercuspation

The patterns of age change in dental arch breadths and depths were studied longitudinally in Australian Aboriginals, 92 males and 68 females. Three types of change in relative arch dimensions were recognized: a divergent pattern in which the differences between maxillary and mandibular dimensions increased with age, a convergent pattern in which the differences decreased, and a parallel pattern in which the arch differences remained metrically stable. The feature that best distinguished the Aboriginals from Caucasian groups was the high frequency of subjects, 71% of males and 40% of females, who showed a divergent growth pattern. The association between divergent growth in arch breadths and the development of alternate intercuspation, which is characterized by an inability to occlude the teeth on both sides of the arch at the same time, is discussed.     

Dental arch shape and tooth wear variability

The rapid rate of tooth wear frequently reported among certain contemporary aboriginal populations has often been attributed to dietary form and abrasives. Several investigators have reported a close correlation between food bulk and the wear planes formed over the dental arches, i.e., steep oblique wear vs. flat horizontal planes. In this investigation we demonstrate that arch shape is an additional and a significant factor influencing the distribution of wear facets and exposed dentin over occlusal surfaces. We examined 64 dental stone casts of Aboriginals from Yuendumu, Central Australia, born between 1900 and 1940. These casts offer a record of the variety of tooth wear and arch forms and their interrelationships. This group of individuals, some subsisting on abrasive and some on soft diets, have dentition which exhibit various wear rates and wear patterns probably due to the diversity of arch shape, size, and occlusal relationships. Hypsiloid or U-shaped maxillas had a more buccally directed wear in contrast to the parabolic or hyperbolic forms, which exhibit a heavier lingual loading. Varying occlusal conditions also contribute to differing wear patterns over the arches. Individuals with alternate intercuspation, for example, have a more horizontally directed wear. These and other conditions of shape, size, and occlusion emphasize the importance of morphological factors in the production of tooth wear rates and patterns in addition to dietary abrasives.     

Changing occlusal variation in Pima Amerinds

Occlusal variables and arch measurements have been recorded on 341 Pima Amerinds pertaining to two samples, one of older individuals raised on traditional diets, the other of younger individuals raised on refined commercial foods that are typical of modern urbanized people. Permanent dental occlusion is significantly more variable from defined ideals in the younger sample, despite their fewer deformities resulting from progressive aging. The youths had relatively narrower palates, correlating with a general trend among industrialized populations and also among experimental animals fed soft diets. Relative rate of deciduous tooth loss and replacement did not correlate with any occlusal variable.     

Helicoidal plane of dental occlusion

A helicoidal plane of postcanine occlusion has been patchily reported in many recent and fossil dentitions of man, and has been suggested as a taxonomic marker distinguishing between the dentitions of Homo and Australopithecines. The present paper describes the helicoidal plane in 19 out of 23 modern human (probably Indian) worn dentitions, in both gracile and robust Australopithecines and in extant anthropoids. It is suggested that tooth wear converts the plane of occlusion present in little-worn teeth, the Monson curve, into a helicoidal plane when 1) the diet is more abrasive, 2) the enamel is thinner and less abrasion resistant, and 3) a longer time separates the eruption of the three molar teeth in a jaw quadrant. A model demonstrates that during the power stroke of a chewing cycle the working side molars move in much the same direction whether the molar occlusal plan follows a Monson curve or a helicoidal plane. The difference is that in the former case the three molars work at the same time while in the latter case they work in sequence from anterior to posterior, thereby concentrating force on one tooth at a time. Because the occlusal plane changes during the life of individuals consuming an abrasive diet, the condition of most anthropoids and hominids, it is argued that the Monson curve has functional significance not because of its influence on occlusal relations and/or jaw movement but because the molar teeth are embedded in bone roughly perpendicular to it, a direction which resists tilting of the teeth during mastication. It is concluded that the helicoidal plane probably has little if any value as a taxonomic marker.     

On the Occlusal Fit of Tribosphenic Molars: Are We Underestimating Species Diversity in the Mesozoic?

The complex occlusal fits between tribosphenic teeth are a rich source of information for taxonomic, phylogenetic, and evolutionary analysis. The degree of fit between upper and lower cheek teeth has been used to refer specimens to species-level taxa, but statistical data on occlusal fit in relation to taxonomic identity have been lacking. We used landmarks on upper and lower first molars of 20 bat populations representing 16 species to assess the degree of occlusal fit (1) between teeth from the same individual; (2) between teeth from different individuals belonging to the same populations; and (3) between teeth belonging to different populations. We found that the fit of teeth belonging to different populations was significantly worse than between those of the same population and that the degree of misfit increased linearly with time since common ancestry, albeit with substantial variance. We used our comparisons to assess the species-level diversity within Batodon, the smallest known placental mammal from the Cretaceous. Our data suggest, with caveats, that instead of belonging to a single species, the specimens assigned to Batodon represent at least two species as different as those belonging to different genera or families of living bats.