Atom ordering in cuboctahedral Ni-Al nanoalloys

Energy calculations have been carried out on high-symmetry cuboctahedral Ni-Al nanoalloy clusters, of varying composition, with the interatomic interactions modelled by the Gupta many-body potential. Relaxations of cuboctahedral fragments cut from the bulk lattice of Ni₃Al, with 13-561 atoms, were undertaken, as were relaxations of high symmetry clusters with 55 and 147 atoms. The lowest energy isomers were found to be dominated by three factors: the tendency toward mixing due to the favourable energy of mixing, Δ_mixE; the size difference between nickel and aluminium; and the higher cohesive and surface energy of nickel compared to aluminium. The latter two factors favour Al-segregation to the surface. The most stable Ni:Al composition approaches 3:1 for larger clusters.     

Low Electron Scattering Potentials in High Performance Mg2Si0.45Sn0.55 Based Thermoelectric Solid Solutions with Band Convergence

Understanding the electron and phonon transport characteristics is crucial for designing and developing high performance thermoelectric materials. Weak scattering effects on charge carriers, characterized by deformation potential and alloy scattering potential, are favorable for thermoelectric solid solutions to enable high carrier mobility and thereby promising thermoelectric performance. Mg₂(Si,Sn) solid solutions have attracted much attention due to their low cost and environmental compatibility. Usually, their high thermoelectric performance with ZT ～ 1 is ascribed to the band convergence and reduced lattice thermal conductivity caused by alloying. In this work, both a low deformation potential Ξ = 13 eV and a low alloy scattering potential U = 0.7 eV are found for the thermoelectric alloys by characterizing and modeling of thermoelectric transport properties. The band convergence is also verified by the increased density‐of‐states effective mass. It is proposed that, in addition to band convergence and reduced lattice thermal conductivity, the low deformation potential and alloy scattering potential are additional intrinsic features that contribute to the high thermoelectric performance of the solid solutions.     

Influence of surface copper content on Stenotrophomonas maltophilia biofilm control using chlorine and mechanical stress

Abstract

This work aimed to evaluate the action of materials with different copper content (0, 57, 96 and 100%) on biofilm formation and control by chlorination and mechanical stress. Stenotrophomonas maltophilia isolated from drinking water was used as a model microorganism and biofilms were developed in a rotating cylinder reactor using realism-based shear stress conditions. Biofilms were characterized phenotypically and exposed to three control strategies: 10?mg l^?1 of free chlorine for 10?min, an increased shear stress (a fluid velocity of 1.5?m s^?1 for 30s), and a combination of both treatments. These shock treatments were not effective in biofilm control. The benefits from the use of copper surfaces was found essentially in reducing the numbers of non-damaged cells. Copper materials demonstrated better performance in biofilm prevention than chlorine. In general, copper alloys may have a positive public health impact by reducing the number of non-damaged cells in the water delivered after chlorine exposure.     

Ni‐Metalloid (B,Si, P,As, and Te) Alloys as Water Oxidation Electrocatalysts

Breakthroughs toward effective water‐splitting electrocatalysts for mass hydrogen production will necessitate material design strategies based on unexplored material chemistries. Herein, Ni‐metalloid (B, Si, P, As, Te) alloys are reported as an emergent class of highly promising electrocatalysts for the oxygen evolution reaction (OER) and insight is offered into the origin of activity enhancement on the premise of the surface electronic structure, the OER activation energy, influence of the guest metalloid elements on the lattice structure of the host metal (Ni), and surface‐oxidized metalloid oxoanions. The metalloids modify the lattice structure of Ni, causing changes in the nearest Ni–Ni interatomic distance (d_Ni–Ni). The activation energy E_a scales with d_Ni–Ni indicating an apparent dependence of the OER activity on lattice properties. During the OER, surface Ni atoms are oxidized to nickel oxyhydroxide, which is the active state of the catalyst, meanwhile, the surface metalloids are oxidized to the corresponding oxoanions that affect the interfacial electrode/electrolyte properties and hence the adsorption/desorption interaction energies of the reacting species.     

Kesterite Thin‐Film Solar Cells: Advances in Materials Modelling of Cu2ZnSnS4

Quaternary semiconducting materials based on the kesterite (A₂BCX₄) mineral structure are the most promising candidates to overtake the current generation of light‐absorbing materials for thin‐film solar cells. Cu₂ZnSnS₄ (CZTS), Cu₂ZnSnSe₄ (CZTSe) and their alloy Cu₂ZnSn(Se,S)₄ consist of abundant, low‐cost and non‐toxic elements, unlike current CdTe and Cu(In,Ga)Se₂ based technologies. Zinc‐blende related structures are formed by quaternary compounds, but the complexity associated with the multi‐component system introduces difficulties in material growth, characterization, and application. First‐principles electronic structure simulations, performed over the past five years, that address the structural, electronic, and defect properties of this family of compounds are reviewed. Initial predictions of the bandgaps and crystal structures have recently been verified experimentally. The calculations highlight the role of atomic disorder on the cation sub‐lattice, as well as phase separation of Cu₂ZnSnS₄ into ZnS and CuSnS₃, on the material performance for light‐to‐electricity conversion in photovoltaic devices. Finally, the current grand challenges for materials modeling of thin‐film solar cells are highlighted.     

Sputter Growth and Characterization of Metamagnetic B2-ordered FeRh Epilayers

Chemically ordered alloys are useful in a variety of magnetic nanotechnologies. They are most conveniently prepared at an industrial scale using sputtering techniques. Here we describe a method for preparing epitaxial thin films of B2-ordered FeRh by sputter deposition onto single crystal MgO substrates. Deposition at a slow rate onto a heated substrate allows time for the adatoms to both settle into a lattice with a well-defined epitaxial relationship with the substrate and also to find their proper places in the Fe and Rh sublattices of the B2 structure. The structure is conveniently characterized with X-ray reflectometry and diffraction and can be visualised directly using transmission electron micrograph cross-sections. B2-ordered FeRh exhibits an unusual metamagnetic phase transition: the ground state is antiferromagnetic but the alloy transforms into a ferromagnet on heating with a typical transition temperature of about 380 K. This is accompanied by a 1% volume expansion of the unit cell: isotropic in bulk, but laterally clamped in an epilayer. The presence of the antiferromagnetic ground state and the associated first order phase transition is very sensitive to the correct equiatomic stoichiometry and proper B2 ordering, and so is a convenient means to demonstrate the quality of the layers that can be deposited with this approach. We also give some examples of the various techniques by which the change in phase can be detected.     

Porous Trimetallic PtRhCu Cubic Nanoboxes for Ethanol Electrooxidation

Direct ethanol fuel cells (DEFCs) have great activity as a green energy conversion device. However, the weak activity of most anode electrocatalysts for the C? C bond cleavage is an obstacle to the DEFCs development. Herein, a simple galvanic replacement reaction strategy to synthesize hollow and porous PtRhCu trimetallic nanoboxes (CNBs) with a tunable Pt/Rh atomic ratio is developed. For the ethanol oxidation reaction (EOR), PtRhCu CNBs show morphology and composition‐dependent electrocatalytic activity. The composition optimized Pt₅₄Rh₄Cu₄₂ CNBs exhibit excellent specific and mass activity and stability for the EOR, which is attributed to its unique geometric structure and synergistic effects. The hollow porous structure can effectively enhance the atomic utilization and mass transfer. The introduction of Cu improves the antipoisoning capability for CO. The introduction of Rh elevates the self‐stability of PtRhCu CNBs. More importantly, further electrochemical results confirm that the introduction of Rh significantly promotes the cleavage of C? C bonds, leading to the transformation of the main catalytic pathway for EOR from C₂ to C₁ pathway. The real concentration detection for C₂ products (CH₃COOH and CH₃CHO) shows Pt₅₄Rh₄Cu₄₂ CNBs have a nearly 11.5‐fold C₁ pathway enhancement compared to Pt nanoparticles, showing an obvious selectivity enhancement for the C₁ pathway.     

Measurement of fibroblast and bacterial detachment from biomaterials using jet impingement

Fibroblast and Staphylococcus aureus detachment strength from orthopaedic alloys and a tissue culture plastic (Thermanox) have been investigated with jet impingement. For S. aureus, unlike fibroblasts, detachment is caused more by pressure than shear. For these biomaterials, detachment strength is much higher for S. aureus than fibroblasts. Comparing materials under equivalent flow conditions, S. aureus attach to stainless steel and titanium with equal strength and more strongly than to Thermanox. For fibroblasts, detachment strength from all materials was similar. Fibroblast detachment strength from these biomaterials substantially decreases with time at equal flow rates and increases with flow rate at equal exposure times. Detachment strength is very similar for 3T3 and L929 fibroblasts on Thermanox for equivalent flow rate/time combinations, though enhanced adhesion of 3T3 cells was often noted for metals. Time effects are less evident for S. aureus. S. aureus adhesion to metals is more affected by flow rate than fibroblast adhesion.     

Achieving zT > 2 in p‐Type AgSbTe2−xSex Alloys via Exploring the Extra Light Valence Band and Introducing Dense Stacking Faults

Through simultaneously enhancing the power factor by engineering the extra light band and enhancing phonon scatterings by introducing a high density of stacking faults, a record figure‐of‐merit over 2.0 is achieved in p‐type AgSbTe_2?xSe_x alloys. Density functional theory calculations confirm the presence of the light valence band with large degeneracy in AgSbTe₂, and that alloying with Se decreases the energy offset between the light valence band and the valence band maximum. Therefore, a significantly enhanced power factor is realized in p‐type AgSbTe_2?xSe_x alloys. In addition, transmission electron microscopy studies indicate the appearance of stacking faults and grain boundaries, which together with grain boundaries and point defects significantly strengthen phonon scatterings, leading to an ultralow thermal conductivity. The synergetic strategy of simultaneously enhancing power factor and strengthening phonon scattering developed in this study opens up a robust pathway to tailor thermoelectric performance.