Glycogen Metabolism in Aureobasidium Pullulans: A Glycogen Synthetase with Unusual Activation Properties

Abstract

Cultures of filamentous fungi that secrete significant amounts of exopolysaccharides are among the most difficult of fermentation fluids, presenting difficulties in the areas of aeration, agitation, mixing, and control that may in turn impact the physiology of the microorganism in an undesirable manner. The fungus Sclerotium glucanicum, which produces a potentially useful exopolysaccharide known as scleroglucan, illustrates many such difficulties. This review discusses in detail the range of physiological studies on the producing microorganism itself, including those concerning formation of “undesirable” byproducts, principally oxalate, but also, under certain conditions, other TCA cycle acids. In addition, the bioreactor technology in use for production of this type of biopolymer is discussed in relation to the difficulties such fluid types present. The potential of pneumatically agitated reactors for such production is evaluated, and the lack of fundamental studies on such reactors and on the hydrodynamics and mixing behavior of such complex fluids is pointed out.     

Collagen gene construction and evolution

Summary Collagen genes appear to have been assembled by the tandem repetition of homologous primary (9 base pair), secondary (54 base pair), and tertiary (702 base pair) modules. In vertebrate interstitial collagen genes many of the secondary modules are separated by introns, but in invertebrate collagen genes the non-coding sequences lie near the ends of supposed tertiary modules and are therefore about 702 (54×13) base pairs apart. The genes for vertebrate interstitial collagens (types I–III) seem to have been constructed by the tandem repetition of five tertiary modules, three of which were subsequently shortened by internal deletions. This shortening of the gene resulted in the non-integral relationship between the period of the fibrils and the length of the molecules of vertebrate collagens, and was therefore responsible for the mechanical properties of the completed product. Comparisons of the amino acid sequences of various collagens indicate that the main types of collagen evolved about 800–900 million years ago, a date that agrees well with the fossil record of primitive Metazoa.     

Selection and proliferation of rapid growing cell lines from embryo derived cell cultures of yew tree (Taxus cuspidata Sieb. et Zucc)

Calli were induced from 300,000 embryos isolated from immature to mature stage of seeds collected on late September from 14 elite trees. When the embryos were cultured onto plastic Petri-dish containing 20 mL of modified B5 basal medium supplemented with 3% (w/v) sucrose, 500 mg/L casein hydrolysate, 250 mg/L myo-inositol, 0.5% (w/v) polyvinyl polypyrrolidon (PVPP), 2×MS vitamins, 0.5 mg/L gibberellic acid, and 10 mg/L 2,4-D after 2 weeks of culture, yellowish-white calli were immediately formed on the surfaces of embryos, and subcultured for 4 weeks in same culture medium. Because most of calli maintained for more than 3 months were revealed differences in their colors, surface texture, and growth rate, visual selection was made for first round screening. When the size of visually selected calli larger than 19 mm in their diameter were inoculated, persistent proliferation was observed. Among the plating methods tested for the selection of rapid growing cell lines at single cell and/or small cell aggregate level, 2-layer spread plating revealed as the best for single cell cloning. To enhance cell growth and maintain high rate of viability for long-term culture of yew cells in bioreactor, final cell volume less than 50% in SCV seemed to be the best. Time course study revealed that 30% of inoculum density was suitable for fed batch culture. Among the tested conditional media, the rate of 1∶2 (old medium: fresh medium) was recorded at the best for cell growth.     

The membrane dialysis bioreactor with integrated radial-flow fixed bed —a new approach for continuous cultivation of animal cells

A hybridoma cell was cultivated continuously in a membrane dialysis bioreactor with an integrated radial-flow fixed bed consisting of porous Siran^® carriers over a period of 6 weeks. Antibodies accumulated to an average of 100 mg l^?1, approx. 10 times more than in fixed bed cultures without dialysis membrane. Serum costs could be reduced about 85% due to an appropriate feeding strategy. Siran^® carriers with 3–5 mm diameter showed an advantage compared to those with 1–2 mm diameter. For the 3–5 mm carrier the specific glucose uptake rate and the MAb production rate were constant, if the velocity was between 0.09 mm s^?1 and 0.75 mm s^?1. At higher velocities cells are washed out of the bed. Furthermore antibody consistency and cell stability were verified in long-term cultivations over a period of 96 days. From an estimation of the antibody concentration reachable with the reactor concept under optimal conditions a concentration 45 times higher compared to axial-flow fixed bed reactors and 11 times higher compared to stirred tank reactors can be expected.     

In vitro multiplication in liquid culture of Syngonium contaminated with Bacillus spp. and Rathayibacter tritici

Contaminated Syngonium clusters were multiplied in an air lift bioreactor in liquid medium containing sucrose with the medium being circulated through a sterilizing filter. After 30 days, the culture in filtered medium produced 19.5 shoot initials per gram fresh weight of inoculum compared to 8.7 shoot initials produced in unfiltered medium. Transfer to an elongation medium with 30 mg l^-1 Rifampicin produced shoots on 67% of the clusters, while transfer to elongation medium without Rifampicin poduced shoots on 40% of the clusters. Clusters grown for three subcultures in a reactor without medium filtration had lost their multiplication ability. Clusters grown for three subcultures in a reactor with filtration, however, continued to show a two-three fold increase in fresh weight and shoot production.Abbreviations MS Murashige and Skoog     

Cultivation of Aspergillus niger in a pilot plant external-loop air-lift bioreactor

Abstract: Changes of the main hydrodynamic and oxygen transfer parameters during Aspergillus niger cultivation in an external-loop air-lift bioreactor of 200 dm³ operating capacity were investigated. The final average concentrations of biomass and citric acid obtained in batch fermentations were about 17 g 1^-1 and 90 g 1^-1, respectively. Significant influence of the increasing biomass concentration on the rheological properties of the broth and operating parameters was found. Volumetric oxygen transfer coefficient. k ^L a , was found to be dependent on the apparent viscosity of the broth with an exponent of -0.984.     

The types of bioreactors used for shoots and embryos

Plant regenerated organs such as shoots, bulbs, microtubers, corms, embryos, etc. have been successfully proliferated in the bioreactor. The use of a bioreactor leads to the development of technology suitable for large scale plant propagation. The basic construction and characteristics of various types of bioreactor systems are reviewed in relation to shoot and embryo cultures. A pilot scale 500 liter bioreactor system was applied to the production of large scale Stevia rebaudiana shoots.Abbreviations DW dry weight - EC electrical conductivity - FW fresh weight - ORP oxidation-reduction potential     

Design of a bubble-swawm bioreactor for animal cell culture

A stationary bubble-swarm has been used to aerate a mammalian cell culture bioreactor with an extremely low gas flow rate. Prolonging the residence time of the gas bubbles within the medium improved the efficiency of the gas transfer into the liquid phase and suppressed foam formation. An appropriate field of speed gradients prevented the bubbles from rising to the surface. This aeration method achieves an almost 90% transfer of oxygen supplied by the bubbles. Consequently, it is able to supply cells with oxygen even at high cell densities, while sparging with a gas flow of only 0.22·10^–3–1.45·10^–3 vvm (30–200 ml/h).The reactor design, the oxygen transfer rates and the high efficiency of the system are presented. Two repeated batch cultures of a rat-mouse hybridoma cell line are compared with a surface-aerated spinner culture. The used cell culture medium was serum-free, either with or without BSA and did not contain surfactants or other cell protecting agents. One batch is discussed in detail for oxygen supply, amino acid consumption and specific antibody production.     

Nutrient utilization during bioreactor culture,and maturation of somatic embryo cultures ofPicea mariana andPicea glauca-engelmannii

Summary Embryogenic cell cultures ofPicea mariana (black spruce) and the species complexPicea glauca-engelmannii (interior spruce) were maintained either as suspensions in liquid medium in 250 or 500-ml-capacity shake-flasks, 7-liter-capacity airlift or mechanically stirred bioreactors, or on agar-solidified medium. Cultures from each of the maintenance conditions were subsequently transferred to agar-solidified LP medium containing 40μM (±) -abscisic acid for maturation into cotyledonary stage embryos. For both species, the highest maturation frequency resulted from cultures grown in the airlift bioreactor. With black spruce cells grown in the airlift bioreactor containing LP medium with 60 mM sucrose, a maximum of 7.1 g·liter⁻¹ dry weight and 2892 embryos·ml⁻¹ were obtained after 15 days. For interior spruce cells, a maximum dry weight of 5.9 g·liter⁻¹ and 2698 embryos·ml⁻¹ were obtained after 21 to 30 days. During culture over 2 wk, ammonia was almost completely utilized by both species, wherease nitrate was depleted to 40% of the initial concentration. Sucrose was rapidly hydrolyzed to glucose and fructose by both species. Black spruce cultures preferentially metabolized glucose, whereas interior spruce preferentially metabolized fructose. Improved growth of interior spruce cells in mechanically stirred bioreactors occurred when cultured in LP medium with 60 mM fructose as the sole carbon source. NRCC no. 36479     

Overexpression of cloned genes using recombinant Escherichia coli regulated by a T7 promoter: II. Two-stage continuous cultures and model simulations

A two-stage culture strategy was studied for continuous high-level production of a foreign protein in the chemically inducible T7 expression system. The first stage is dedicated to the maintenance of plasmid-bearing cells and the second stage to the target protein synthesis by induction of cells coming from the first stage. On entering the second stage, recombinant cells undergo a gradual induction of the target gene expression. These plasmid-bearing cells experience dynamic changes in intracellular compositions and specific growth rates with their individual residence times. Therefore, the overall cultural characteristics in the production stage are really averages of the contributions from the various cells with different residence times. The behavior of the two-stage culture is described by a model, which accounts for dynamic variations of cell growth and protein synthesis rates with cell residence times. Model simulations were compared with experimental results at a variety of operating conditions such as inducer concentration and dilution rate. This model is useful for understanding the behavior of two-stage continuous cultures. (c) 1993 John Wiley & Sons, Inc.