Association of specific leaf weight, an estimate of chlorophyll, and chlorophyll concentration with apparent photosynthesis in soybean

Increasing specific leaf weight (SLW) may improve leaf apparent photosynthesis (AP) in soybean [Glycine max (L.) Merr.] but screening for SLW and AP is laborious. The Objectives of this study were (i) to determine the time course of SLW and chlorophyll concentration in experimental lines selected for differences in SLW and (ii) to evaluate the potential use of the Minolta 502 SPAD meter as a rapid estimator of SLW, AP and chlorophyll concentration in leaves of soybean. In 1991 and 1992, sixteen experimental lines representing extremes in SLW were grown at Urbana, IL, and West Lafayette, IN, with three replications at each location. SPAD values, SLW and AP were measured at the R2 (full flower), R4 (full pod) and R5 (beginning seed) growth stages. In 1992 SLW, SPAD values and chlorophyll concentration were measured weekly. Seasonal patterns of SPAD values, SLW, and chlorophyll concentration were very similar through R5. After R5, SLW continued to increase but SPAD values and chlorophyll concentration declined. SPAD values and SLW were highly correlated at the R2, R4 and R5 stages at both locations and in both years. Environmental conditions during this research were not suitable for maximum AP expression, which is likely why AP and SPAD values were correlated only at the R4 growth stage at Urbana in 1992. SPAD measurements were consistent across diverse environments and effectively separated the high SLW lines from the low SLW lines. Measuring with the Minolta 502 SPAD meter is rapid, simple and non-destructive and could be an alternative method for direct selection for SLW.Abbreviations AP- leaf apparent photosynthesis - CV- coefficient of variation - Rug- leaf rugosity - SLW- specific leaf weight - SPAD-L- SPAD value of the most recently expanded terminal leaflet - SPAD-P- SPAD value of leaflet used to measure AP - SPAD-S- SPAD value of leaflets used to measure SLW - SPAD-U- SPAD value of the terminal leaflet one node above the most recently expanded terminal leaflet The US Government right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged     

Head tube: a simple device for estimating velocity in running water

Construction and operation of a head tube are described. A head tube is an inexpensive, easily-built alternative to a current meter for measuring water velocity in streams and rivers. When water flowing in a channel is obstructed by an object, its depth increases at the point of zero velocity (stagnation zone). The difference between the flowing-water depth and depth in the stagnation zone is the head (h). A head tube consists of a clear, hollow, 2.5 cm diameter acrylic tube and a sliding sleeve made of clear plastic. The tube is placed vertically on the river bottom. The difference (head) between water level inside the tube and the height of water against the tube's upstream face is measured against a scale (cm s^–1) drawn on the sleeve, which provides a direct reading of velocity. Graduations of the scale are calculated from a hydrodynamic equation relating mean velocity () to head (h): = (2gh)^0.5, whereg is acceleration due to gravity. When tested in a laboratory flume, the head tube gave very precise estimates of velocity (R ² of relationship = 0.98), although the original calibration scale overestimated current meter-measured velocity by 22 percent. The relationship between head tube and current meter estimates of mean velocity determined in a river with stony substrate was less precise than the correspondence observed in the laboratory (R ² = 0.81). However, estimates of discharge based on head tube measurements were within 8 percent of estimates based on current meter readings.     

An automated differential thermal and potentiometric titration apparatus for binding studies

A differential pH-termal titration apparatus is described which can detect pH differences with a sensitivity of ±0.0001 pH units and a thermal sensitivity of ±0.00002°C at a time constant of 0.1 s. With a reaction which yields 1 kcal mol⁻¹, the current system can detect concentrations as low as 4×10⁻⁶ M or, in a 2 ml volume, a total amount of 40 nmol. With a time constant of 0.1 s, the sensitivity is 20±4 μ°C. The experimental protocol is specified by a microprocessor and three modes of operation are possible: titration at constant rate of reagent addition, titration at variable rates of addition so that the contents of both cells are at either constant pH or at a constant temperature and variable rate when a rate of change is specified. Experimental data are collected in files, corrected for heat loss, initial baseline drift, and changes in volume. The final corrected from the standardized run of 0.01338 M HCl in 0.2 M KCl at 25°C calibrate the pH scale yielded the calorimetric conversion constants and pK_w which are calculated and stored for subsequent corrections for the titration of an unknown acid or the measurement of bindin constants and heats.     

Patterns of morphological and genetic diversity of Valeriana jatamansi Jones in different habitats and altitudinal range of West Himalaya,India

Importance to know and understand diversity of Himalayan plants is increasingly recognized considering the fact that various natural and anthropogenic pressures might bring about serious influences to morphological and genetic diversity of the vegetation in the region. In this context, Valeriana jatamansi was investigated in detail, taking into account its importance in various Ayurvedic and modern medicines. Randomly selected mature plants from twenty five different populations (located between 1215 m to 2775 m asl) of V. jatamansi were analysed for their morphological attributes. Further, ISSR markers were used to detect genetic variation among 151 plants of selected 25 populations. Use of 20 primers yielded 125 reproducible polymorphic loci which were used to estimate different parameters of genetic diversity. These parameters were in turn applied to develop relationships with habitat types and altitude range. Significant variation (p < 0.05) in above ground dry weight (AGDW) and below ground dry weight (BGDW) across the populations was observed. Nei's genetic diversity index (He) ranged from 0.25 to 0.37 across the populations, with a mean of 0.31. Genetic diversity exhibited a decreasing trend with increasing altitude, and maximum diversity (He = 0.325) was observed in the range of 1201–1500 m asl. Among the different habitat conditions, highest genetic diversity (He = 0.334; Pp = 84.38) was observed in grassland habitats while minimum in mixed forest habitats (He = 0.285; Pp = 72.433). The genetic diversity (He) had significant negative relationships with AGDW, BGDW and rhizome diameter (Pearson r = −0.359, −0.424 and −0.317, respectively; p < 0.05). The genetic characterization of V. jatamansi from the western Himalaya by this study suggests influences of habitat types and the altitudinal range upon genetic diversity, and based on these proposals for conservation strategies in favour of the species are made.     

1914G variant of BCHE gene associated with enzyme activity,obesity and triglyceride levels

Polymorphisms of butyrylcholinesterase (BChE) have been reported to be associated to weight, BMI variance and hypertriglyceridemia in adults and adolescents. The aim of the present study was to investigate the association of −116A (SNP: G/A; rs1126680) and 1914G (SNP: A/G; rs3495) variants of BCHE gene with anthropometric and biochemical variables associated with obesity in population sample of 115 individuals, from Southern Brazil. Participants were grouped in two categories: obese (BMI ≥ 30) and non-obese (BMI < 30). The 1914G allele showed significantly higher frequency in the obese group, and carriers of 1914G allele showed lower mean BChE activity when compared to 1914A carriers (p = 0.006). Higher means of BMI (p = 0.02) and triglyceride (TG; p = 0.01) were found in 1914G carriers (BMI = 27.57kg/m²; TG = 150.8 mg/dL) when compared to 1914A homozygotes (BMI = 25.55 kg/m²; TG = 107.9 mg/dL). Carriers of the −116A allele showed lower mean BChE activity than usual homozygotes, and the −116A variant was found in cis with 1914G (p < 0.0001; D′ = 1). The region of BCHE gene that contains the 1914G mutation site is target of microRNAs (miRs) and the response of BChE to glucocorticoids is especially influenced by these miRs. Therefore, it is possible that the 1914G allele can be interfering in gluconeogenesis, hyperglycemia, lipolysis and body fat distribution. This lower activity may cause an imbalance in lipid metabolism, which may lead to an increased predisposition to obesity and to a lower ability to maintain metabolic homeostasis.     

Screening and identification of novel isolate Streptomyces sp., NLKPB45 from Nellore costal region for its biomedical applications

Actinobacteria, which are the prolific producers of antibiotics and significant suppliers to the pharmaceutical industry, can produce a wide variety of bioactive metabolites. An actinomycete strain designated NLKPB45 was isolated from mangrove soils samples of Nellore coastal regions Andhra Pradesh and assessed for antibiotic production and activity against pathogenic bacteria. From a total of 9 mangrove soil samples, 143 acinomycetes were isolated. Among the isolated them 6 actinomycetes strains showed potential antibacterial activity against at two tested pathogens gram positive and gram negative bacteria E. coli and S. aureus. The potent strain NLKPB45 was identified by 16S gene isolation and sequencing to the Streptomyces genus. The ethyl acetate extracts also as shown excellent antimicrobial activity against Salmonella sp., staphylococcus aureus, E. coli, and B. subtilus were detected in both the supernatant extract samples from fermentations of culture NLKPB45. The anticancer activity of extracts in the HeLa with IC₅₀ value of 37.1924 μg/ml, MCF-7 IC₅₀ value of 40.9177 μg/ml and HT 29 IC₅₀ value of 43.3758 μg/ml.     

全自动血型仪的应用评价

目的了解全自动血型鉴定系统用于检测ABO血型和Rh(D)血型的效果。方法采用深圳爱康AK03A型数字血型仪对北海市中心血站2010年5月—2011年12月无偿献血者20702份样本进行ABO血型和Rh(D)血型鉴定,并与手工试管法进行对比验证。结果发现正反定型不一致的有75例,ABO初筛血型错误的36例,Rh(D)阴性的53例。结论全自动血型鉴定系统检测血型快捷、方便、高效,能降低检测人员的工作强度,但判读结果时需要与手工试管法结合进行验证,才能得出正确的结果。     

应用高精度pH计测定植物的光合速率和呼吸速率

为方便、准确地测定植物的光合速率和呼吸速率,将高精度pH计和高灵敏复合电极引入测定系统.结合样品的测定,阐明了pH计法的测定原理、气路连接和复合电极的标定,并指出了测定过程中应注意的事项.