Mutants of a lovastatin-hyperproducingAspergillus terreus deficient in the production of sulochrin

Summary A lovastatin-hyperproducing culture ofAspergillus terreus was shown to produce several co-metabolites extracted from whole broth. The predominant co-metabolite was the benzophenone, sulochrin, reported to arise from a polyketide biosynthetic pathway. This compound was targeted for elimination by classical mutagenesis and screening. A surface culture method employing microtiter, plates was used to ferment mutants for the primary screen. Qualitative determinations of lovastatin and sulochrin production were achieved by high-performance thin-layer chromatography. A mutant, strain AH6, which produced lovastatin titers equivalent to the parent culture and no detectable sulochrin was isolated. In addition, a lovastatin-hyperproducing mutant designated CB4 was capable of producing 16% more lovastatin and 30% less sulochrin than the parent culture in shake flask fermentations. In a pilot-scale 250-gallon fermentation, strain CB4 gave a 20% increase in lovastatin titer while producing 83% less sulochrin than the parent culture.     

Evaluation of coumarin-based fluorogenic P450 BM3 substrates and prospects for competitive inhibition screenings

Fluorescence-based assays for the cytochrome P450 BM3 monooxygenase from Bacillus megaterium address an attractive biotechnological challenge by facilitating enzyme engineering and the identification of potential substrates of this highly promising biocatalyst. In the current study, we used the scarcity of corresponding screening systems as an opportunity to evaluate a novel and continuous high-throughput assay for this unique enzyme. A set of nine catalytically diverse P450 BM3 variants was constructed and tested toward the native substrate-inspired fluorogenic substrate 12-(4-trifluoromethylcoumarin-7-yloxy)dodecanoic acid. Particularly high enzyme-mediated O-dealkylation yielding the fluorescent product 7-hydroxy-4-trifluoromethylcoumarin was observed with mutants containing the F87V substitution, with A74G/F87V showing the highest catalytic efficiency (0.458 min⁻¹ μM⁻¹). To simplify the assay procedure and show its versatility, different modes of application were successfully demonstrated, including (i) the direct use of NADPH or its oxidized form NADP⁺ along with diverse NADPH recycling systems for electron supply, (ii) the use of cell-free lysates and whole-cell preparations as the biocatalyst source, and (iii) its use for competitive inhibition screens to identify or characterize substrates and inhibitors. A detailed comparison with known, fluorescence-based P450 BM3 assays finally emphasizes the relevance of our contribution to the ongoing research.     

Glycoside hydrolase carbohydrate-binding modules as molecular probes for the analysis of plant cell wall polymers

Novel molecular probes have been developed for the analysis and detection of polysaccharides in plant cell walls using carbohydrate-binding modules (CBMs) derived from modular glycoside hydrolases belonging to families 2a, 6, and 29. Recombinant forms of these proteins containing his-tags, in conjunction with anti-his-tag detection, provide a flexible system that utilizes CBMs as molecular probes in a range of applications. Assays for the rapid analysis of the binding of CBMs to polysaccharides and oligosaccharides using nitrocellulose-based CBM macroarrays and microtiter plate-based CBM capture and competitive-inhibition assays are described. We also demonstrate the use of CBMs with his-tags for the localization of their target ligands in planta. The generation of molecular probes from other families of CBMs will dramatically increase the repertoire of molecular probes available to determine the developmental and functional aspects of plant cell walls.     

Colorimetric detection of the toxic dinoflagellate Alexandrium minutum using sandwich hybridization in a microtiter plate assay

Rapid and reliable detection of harmful algae in coastal areas and shellfish farms is an important requirement for monitoring programs. Molecular technologies are rapidly improving the detection of phytoplankton and their toxins. Assays are based on the discrimination of genetic differences in the species. A commercially available PCR ELISA Dig Detection Kit in a microtiter plate was adapted for the rapid assessment of specificity of the two probes used in a sandwich hybridization assay. The toxic dinoflagellate Alexandrium minutum was used as the target organism and a capture and signal probe were designed for a species-specific identification of this species. This assay also provided the necessary specificity tests prior to the probes being adapted to an automated biosensor using a sandwich hybridization format. All probes regardless of the detection method must be extensively tested prior to use in the field. Total rRNA was isolated from three different strains of A. minutum and the mean concentration of RNA per cell of was determined to be 0.028 ng ± 0.003. Thus, a standard calibration curve for different RNA concentrations was determined so that cell numbers could be inferred from the assay. The assay and the standard curve were evaluated by using spiked field samples. The results demonstrated that the molecular assay was able to detect A. minutum cells at different cell counts in the presence of a complex background.     

A colorimetric microtiter plate method for assessment of phage effect on Pseudomonas aeruginosa biofilm

Bacteriophages have a potential in biofilm control. The aim of the study was to develop a method for selection of the most effective Pseudomonas aeruginosa phages for inhibition of biofilm formation and its eradication. The microtiter plate method is based on crystal violet staining and measuring of optical density.     

Occurrence of Potentially Pathogenic Bacteria in Epilithic Biofilm Forming Bacteria isolated from Porter Brook River-stones,Sheffield, UK

Biofilms in aquatic ecosystems develop on wet benthic surfaces and are primarily comprised of various allochthonous microorganisms, including bacteria embedded within a self-produced matrix of extracellular polymeric substances (EPS). In such environment, where there is a continuous flow of water, attachment of microbes to surfaces prevents cells being washed out of a suitable habitat with the added benefits of the water flow and the surface itself providing nutrients for growth of attached cells. When watercourses are contaminated with pathogenic bacteria, these can become incorporated into biofilms. This study aimed to isolate and identify the bacterial species within biofilms retrieved from river-stones found in the Porter Brook, Sheffield based on morphological, biochemical characteristics and molecular characteristics, such as 16S rDNA sequence phylogeny analysis. Twenty-two bacterial species were identified. Among these were 10 gram-negative pathogenic bacteria, establishing that potential human pathogens were present within the biofilms. Klebsiella pneumoniae MBB9 isolate showed the greatest ability to form a biofilm using a microtiter plate-based crystal violet assay. Biofilm by K. pneumoniae MBB9 formed rapidly (within 6 h) under static conditions at 37 °C and then increased up to 24 h of incubation before decreasing with further incubation (48 h), whereas the applied shear forces (horizontal orbital shaker; diameter of 25 mm at 150 rpm) had no effect on K. pneumoniae MBB9 biofilm formation.     

A 96-well microtiter plate assay for high-throughput screening of Mycobacterium tuberculosis dTDP-d-glucose 4,6-dehydratase inhibitors

Mycobacterium tuberculosis dTDP-d-glucose 4,6-dehydratase (RmlB) is the second enzyme for the biosynthesis of dTDP-l-rhamnose, which is a sugar donor to the synthesis of the cell wall linker, d-N-acetylglucosamine-l-rhamnose. RmlB is essential to mycobacterial growth and is not found in humans; therefore, it is a potential target for developing new anti-tuberculosis drugs. So far, there has been no suitable method for high-throughput screening of RmlB inhibitors. Here, the recombinant M. tuberculosis RmlB was purified and an absorbance-based microtiter plate assay was developed for RmlB activity. It could be used for high-throughput screening of RmlB inhibitors. The kinetic properties of M. tuberculosis RmlB, including optimal pH, optimal temperature, the effect of metal ions, and the kinetic parameters, were determined with this assay. The inhibitory effects of dTTP and dTDP on M. tuberculosis RmlB were also studied with the assay.     

Fabrication and characterization of a multiwell array SERS chip with biological applications

Uniform, large surface area substrates for surface-enhanced Raman spectroscopy (SERS) are fabricated by oblique angle deposition. The SERS-active substrates are patterned by a polymer-molding technique to provide a uniform array for high throughput biosensing and multiplexing. Using a conventional SERS-active molecule, 1,2-di(4-pyridyl)ethylene (BPE) ≥98%, we show that this device provides a uniform Raman signal enhancement from well to well with a detection limit of at least 10⁻⁸ M of the BPE solution or 10⁻¹⁸ mol of BPE. The SERS intensity is also demonstrated to vary logarithmically with the log of BPE concentration and the apparent sensitivity of the patterned substrate is compared to previous reports from our group on non-patterned substrates. Avian influenza is analyzed to demonstrate the utility of SERS multiwell patterned substrates for biosensing. The spectra acquired from patterned substrates show better reproducibility and less variation compared to the unpatterned substrates according to multivariate analysis. Our results highlight potential advantages of the patterned substrate.     

Microbial alcohol dehydrogenase screening for enantiopure lactone synthesis: Down-stream process from microtiter plate to bench bioreactor

One-pot conversion with whole cells of bacteria was performed for biooxidation of meso monocyclic (3a–b) and bicyclic diols (3c–e) into corresponding chiral lactones of bicyclo[4.3.0]nonane structure (2a–b) as well as exo- and endo-bridged lactones with the structure of [2.2.1] (3c–d) and [2.2.2] (3e). Micrococcus sp. DSM 30771 was selected as biocatalyst with significant alcohol dehydrogenase activity. Among tested strains, microbial oxidation of meso diols 3a–e catalyzed by Micrococcus sp. afforded enantiomerically pure ((+)-(2S,3R)-2c (ee = 99%), (+)-(2S,3R)-2e (ee = 99%)) or enriched ((+)-(1S,5R)-2a (ee = 90%), (−)-(1S,5R)-2b (ee = 86%), (+)-(2S,3R)-2d (ee = 80%)) lactone moieties. Comparative study with respect to microbial cultivation as well as biooxidation was undertaken to verify agreement of secondary metabolite biosynthesis in different scales: from MTP (4 mL), across shake flask (100 mL) till bioreactor (4 L). The results from biotransformations showed quite similar dependence in oxidation of all substrates 3a–e in MTP and flasks as well, thereby confirmed the validity and reasonable approach of using MTP for preliminary studies.     

Growth of the salt-tolerant yeast Zygosaccharomyces rouxii in microtiter plates: effects of NaCl,pH and temperature on growth and fusel alcohol production from branched-chain amino acids

Zygosaccharomyces rouxii, a salt-tolerant yeast isolated from the soy sauce process, produces fusel alcohols (isoamyl alcohol, active amyl alcohol and isobutyl alcohol) from branched-chain amino acids (leucine, isoleucine and valine, respectively) via the Ehrlich pathway. Using a high-throughput screening approach in microtiter plates, we have studied the effects of pH, temperature and salt concentration on growth of Z. rouxii and formation of fusel alcohols from branched-chain amino acids. Application of minor variations in pH (range 3-7) and NaCl concentrations (range 0-20%) per microtiter plate well allowed a rapid and detailed evaluation of fermentation conditions for optimal growth and metabolite production. Conditions yielding the highest cell densities were not optimal for fusel alcohol production. Maximal fusel alcohol production occurred at low pH (3.0-4.0) and low NaCl concentrations (0-4%) at 25 degrees C. At pH 4.0-6.0 and 0-18% NaCl, considerable amounts of alpha-keto acids, the deaminated products from the branched-chain amino acids, accumulated extracellularly. The highest cell densities were obtained in plates incubated at 30 degrees C. The results obtained under various incubation conditions with (deep-well) microtiter plates were validated in Erlenmeyer shake-flask cultures.