Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

MacStylet, software to analyse electrical penetration graph data on the Macintosh

Conclusion Since the EPG method is increasingly utilized in the investigation of plant-Homoptera interactions, this software has been developed to enable fast processing of abundant data. The objective seems to have been achieved and, with a little practice, a 2-hour experiment may be analysed in about 10–15 minutes. Mac-Stylet is stand-alone shareware, freely distributed to all persons interested (request to G. Febvay, email: febvay@jouy.inra.fr).     

How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.     

Decision Support through Mass and Energy Flow Management in the Vehicle-Refinishing Sector

In the past few decades, major advances in environmental protection within the coating application industry have been made. In spite of this technological progress, approximately 50% of industrial-solvent emissions still come from the paint-application sector. The advances made in reducing emissions for plants requiring licensing have unfortunately had no influence on the environmental efforts of smaller companies. Solvent-reduced painting systems, such as high-solid paints, water-based coating, and powder coating have not been able to achieve acceptance, nor have innovative application technologies. The principal arguments against a conversion to these ecologically more favorable alternatives were related to cost and quality.
Recently, the EU Solvent Directive (1999/13/EC) went into effect, aiming to significantly reduce industrial-solvent emissions. Up until this point, however, instruments enabling smaller companies to determine their solvent emissions and to simultaneously develop process-improvement potentials while keeping costs in mind have been missing.
Using the mass and energy flow-management approach, cost structures and environmental benefits can be made transparent to the entrepreneur. The primary result of the research projects presented here is the computer-based mass and energy flow model called the individual computer-aided mass and energy flow model for the vehicle-refinishing sector (IMPROVE). It can be used as a detailed business-consultancy tool. Based upon this, practical guidelines were developed for easy orientation and activity planning. They can be used by companies to help them fulfill the requirements of environmental legislation and to display the benefits that can be achieved by various emission-reduction measures.     

A spectral correlation function for efficient sequential NMR assignments of uniformly 15N-labeled proteins

Summary A new computer-based approach is described for efficient sequence-specific assignment of uniformly ¹⁵N-labeled proteins. For this purpose three-dimensional ¹⁵N-correlated [¹H, ¹H]-NOESY spectra are divided up into two-dimensional ¹H-¹H strips which extend over the entire spectral width along one dimension and have a width of ca. 100 Hz, centered about the amide proton chemical shifts along the other dimension. A spectral correlation function enables sorting of these strips according to proximity of the corresponding residues in the amino acid sequence. Thereby, starting from a given strip in the spectrum, the probability of its corresponding to the C-terminal neighboring residue is calculated for all other strips from the similarity of their peak patterns with a pattern predicted for the sequentially adjoining residue, as manifested in the scalar product of the vectors representing the predicted and measured peak patterns. Tests with five different proteins containing both -helices and -sheets, and ranging in size from 58 to 165 amino acid residues show that the discrimination achieved between the sequentially neighboring residue and all other residues compares well with that obtained with an unguided interactive search of pairs of sequentially neighboring strips, with important savings in the time needed for complete analysis of 3D ¹⁵N-correlated [¹H, ¹H]-NOESY spectra. The integration of this routine into the program package XEASY ensures that remaining ambiguities can be resolved by visual inspection of the strips, combined with reference to the amino acid sequence and information on spin-system types obtained from additional NMR spectra.Abbreviations 1D, 2D, 3D, 4D one-, two-, three-, four-dimensional - NOE nuclear Overhauser enhancement - NOESY nuclear Overhauser enhancement spectroscopy - COSY correlation spectroscopy - TOCSY total correlation spectroscopy     

Epstein-Barr病毒基因组编码的BARF-1和EC-LF4蛋白质与免疫球蛋白结构同源

将EB病毒蛋白质BARF-1和EC-LF4与NBRF蛋白质库的序列进行局部同源性检索以及与已知的Ig V或C功能区相关分子进行对准比较,检查了同源性积分的统计学意义,并进行了二级结构预测和疏水性分析,确定了BARF-1的第13-124位和第126-221位残基片段分别与V和C样功能区类似,EC-LF4的第20-135位残基片段与V样功能区相似,BARF-1是非膜蛋白,EC-LF4是膜整合蛋白,其胞外部分近膜侧有一个类似于Ig绞链区的序列。因此,BARF-1与Ig轻链结构相似,EC-LF4与CD8抗原的第一条链相似。根据Ig超族分子的一般功能(即介导细胞粘附和细胞识别),推测EC-LF4可能作为一种粘附分子与淋巴细胞表面的Ig相关分子结合而促进EB病毒对淋巴细胞的感染。BARF-1因已知与病毒复制有关,与Ig超族的一般功能无关。EC-LF4和BARF-1的Ig样功能区可能来源于EB病毒对宿主细胞Ig基因的整合。     

hw‐quickcheck: an easy‐to‐use computer program for checking genotypes for agreement with Hardy–Weinberg expectations

Deviations from Hardy–Weinberg expectations are frequently a sign of genotyping error. hw‐quickcheck is an easy‐to‐use computer program for detecting departures from Hardy–Weinberg equilibrium. hw‐quickcheck uses exact tests for all of its calculations. These tests include a global test for heterozygote excess/deficiency and genotype‐specific tests.     

burnr: Fire history analysis and graphics in R

We developed a new software package, burnr, for fire history analysis and plotting in the R statistical programming environment. It was developed for tree-ring fire-scar analysis, but is broadly applicable to other event analyses (e.g., avalanches, frost rings, or culturally modified trees). Our new package can read, write, and manipulate standard tree-ring fire history FHX files, produce fire—demography charts, calculate fire frequency and seasonality statistics, and run superposed epoch analysis (SEA). A key benefit of burnr is that it enables automation of analyses and plotting, especially for large data sets. The package also facilitates creative plotting, mapping, and analyses when combined with the thousands of packages available in R. In this paper, we describe the basic functionality of burnr and introduce users to fire history analyses in R.     

The Blue Water Footprint of Primary Copper Production in Northern Chile

Water consumption related to the life cycle of metals is seldom reported, even though mines are often situated in very dry regions. In this study we quantified the life cycle consumption of groundwater and fresh surface water (blue water footprint [WF_blue]) for the extraction and production of high‐grade copper refined from both a copper sulfide ore and a copper oxide ore in the Atacama Desert of northern Chile. Where possible, we used company‐specific data. The processes for extracting copper from the two types of ore are quite different from each other, and the WF_blue of the sulfide ore refining process is 2.4 times higher than that of the oxide ore refining process (i.e., 96 cubic meters per metric ton [tonne] of copper versus 40 cubic meters per tonne of copper). Most of the water consumption (59% of WF_blue) in the sulfide ore process occurred at the concentrator plant, via seepage, accumulation, and also by evaporation. In the oxide ore process, the main user of water is the heap‐leaching process, with 45% of WF_blue. The crushing and agglomeration operations, electrowinning cells, and solution pools are also significant contributors to the total consumption of water in the oxide ore process. Most of the water consumed in the oxide ore process was lost to evaporation. The WF_blue of the oxide ore process can be reduced by preventing water evaporation and using more sophisticated devices during irrigation of the leaching heaps. The WF_blue of the sulfide ore refining process can be reduced by improving water recovery (i.e., reducing seepage, accumulation, and evaporation) from the tailings dam at the concentrator plant. Using seawater in the production of copper is also a promising option to reduce the WF_blue by up to 62%.     

MultiGWAS: An integrative tool for Genome Wide Association Studies in tetraploid organisms

The genome‐wide association studies (GWASs) are essential to determine the genetic bases of either ecological or economic phenotypic variation across individuals within populations of the model and nonmodel organisms. For this research question, the GWAS replication testing different parameters and models to validate the results'' reproducibility is common. However, straightforward methodologies that manage both replication and tetraploid data are still missing. To solve this problem, we designed the MultiGWAS, a tool that does GWAS for diploid and tetraploid organisms by executing in parallel four software packages, two designed for polyploid data (GWASpoly and SHEsis) and two designed for diploid data (GAPIT and TASSEL). MultiGWAS has several advantages. It runs either in the command line or in a graphical interface; it manages different genotype formats, including VCF. Moreover, it allows control for population structure, relatedness, and several quality control checks on genotype data. Besides, MultiGWAS can test for additive and dominant gene action models, and, through a proprietary scoring function, select the best model to report its associations. Finally, it generates several reports that facilitate identifying false associations from both the significant and the best‐ranked association Single Nucleotide Polymorphisms (SNPs) among the four software packages. We tested MultiGWAS with public tetraploid potato data for tuber shape and several simulated data under both additive and dominant models. These tests demonstrated that MultiGWAS is better at detecting reliable associations than using each of the four software packages individually. Moreover, the parallel analysis of polyploid and diploid software that only offers MultiGWAS demonstrates its utility in understanding the best genetic model behind the SNP association in tetraploid organisms. Therefore, MultiGWAS probed to be an excellent alternative for wrapping GWAS replication in diploid and tetraploid organisms in a single analysis environment.