Effects of detergents on catalytic activity of human endometase/matrilysin 2, a putative cancer biomarker

Matrix metalloproteinases (MMPs) are a family of hydrolytic enzymes that play significant roles in development, morphogenesis, inflammation, and cancer invasion. Endometase (matrilysin 2 or MMP-26) is a putative early biomarker for human carcinomas. The effects of the ionic and nonionic detergents on catalytic activity of endometase were investigated. The hydrolytic activity of endometase was detergent concentration dependent, exhibiting a bell-shaped curve with its maximum activity near the critical micelle concentration (CMC) of nonionic detergents tested. The effect of Brij-35 on human gelatinase B (MMP-9), matrilysin (MMP-7), and membrane-type 1 MMP (MT1-MMP) was further explored. Their maximum catalysis was observed near the CMC of Brij-35 (∼ 90 μM). Their IC₅₀ values were above the CMC. The inhibition mechanism of MMP-7, MMP-9, and MT1-MMP by Brij-35 was a mixed type as determined by Dixon’s plot; however, the inhibition mechanism of endometase was noncompetitive with a K_i value of 240 μM. The catalytic activities of MMPs are influenced by detergents. Monomer of detergents may activate and stabilize MMPs to enhance catalysis, but micelle of detergents may sequester enzyme and block the substrate binding site to impede catalysis. Under physiological conditions, a lipid or membrane microenvironment may regulate enzymatic activity.     

Influence of ionic strength and pH on the interaction between high-affinity heparin and antithrombin

Binding constants for the binding of high-affinity heparin to antithrombin at different ionic strengths were determined by fluorescence titrations and were also estimated from dissociation curves of the heparin-antithrombin complex. These curves were monitored by near-ultraviolet circular dichroism or fluorescence. The dependence of the binding constant on the activity of NaCl suggested that maximally 5–6 charged groups are directly involved in the interaction between the two macromolecules. Major pH-dependent changes of the interaction, as evident by changes of the spectroscopic properties of the complex between the molecules, were found to occur below pH 5.5 and above pH 8.5. The acid change, which was irreversible, was most likely caused by an irreversible conformational change of antithrombin. At alkaline pH, however, the gross conformation of antithrombin was stable up to pH 12, while the affinity of high-affinity heparin for antithrombin began to decrease markedly at pH 8.5. The dissociation curve, which was reversible, had a midpoint around pH 9.5. This is compatible with the loss of affinity being caused by either a local conformational change, by ionization of tyrosine or by titration of one or more amino groups.     

Localisation autoradiographique des ions Cl− et Na+ dans les cellules à chlorure de la branchie d'anguille (Anguilla anguilla L.) adaptée à l'eau de mer

Résumé Nous avons montré par une technique autoradiographique que les ions Cl^– et Na⁺ sont concentrés dans les cellules à chlorure de la branchie d'anguille adaptée à l'eau de mer. La signification de cette accumulation ionique plus marquée vers le pôle apical de ces cellules a été discutée par rapport à l'excrétion branchiale de ces ions en eau de mer.

---

Autoradiographic localization of Cl^– and Na⁺ ions in the chloride cells of sea water adapted eel (Anguilla anguilla L.) gills

Summary With an autoradiographic technique Cl^– and Na⁺ ions have been shown to be localized in the chloride cells of sea water eel gills. The significance of this accumulation, more marked towards the apical pole of these cells, is discussed with regard to branchial excretion of these ions in sea water.

     

Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.     

Antagonistic and synergistic interactions between aluminum and manganese on growth of Vigna unguiculata at low ionic strength

Concentrations of soluble aluminum (Al) and manganese (Mn) frequently reach phytotoxic levels in acid soils. While dose response relationships for these metals are well documented, the effects of combined exposure have received less attention. We have examined the effect of combinations of Al and Mn on growth and metal accumulation in Vigna unguiculata (L.) Walp. grown in solution culture under conditions of low ionic strength (conductivities typically < 100 µS cm⁻¹). The nature of interaction between these metals varied with the specific physiological response, the part of the plant investigated, and the relative amount of stress imposed. Analysis of growth data provided evidence for amelioration of metal toxicity (antagonistic effects), although this effect was dose dependent. Analysis of metal content data provided evidence for antagonistic and synergistic (exacerbation of toxicity) effects, again depending on dose. Analysis of foliar symptoms also provided evidence for antagonisms and synergisms, with the nature of the response dependent on the specific physiological response and specific plant part investigated. In contrast with previous reports, evidence for antagonistic, synergistic, and multiplicative effects on growth, metal uptake, and expression of foliar symptoms have been obtained under physiologically and environmentally relevant conditions. These results suggest a more detailed analysis of the potential for interactions between metals in the environment is required.     

Viability, strength, and fragmentation of Saccharopolyspora erythraea in submerged fermentation.

Two fermentations of the commercially important erythromycin-producing filamentous bacterium Saccharopolyspora erythraea were conducted in defined media. One was glucose-limited and the other nitrate-limited. The viability of the hyphae was determined using the fluorescent stain BacLight (Molecular Probes, Eugene, OR). Also, the force required to strain hyphae to breakage was determined using micromanipulation and a sensitive force transducer. In both fermentations, fragmentation coincided with the appearance of regions in the mycelia with permeabilised membranes (considered nonviable). Under glucose-limitation, hyphal breaking force rose to 1,050 +/- 130 nN at the end of the growth phase and fell to an undetectable value as a result of glucose exhaustion. Under nitrate-limitation, hyphal breaking force fell from 900 +/- 160 nN during the growth phase to 550 +/- 40 nN in the stationary phase. In both cases image analysis showed that the dimensions of mycelia were of the same order, suggesting that the major factor influencing fragmentation was the appearance of nonviable regions (assumed to be weak). The location in which nonviable regions first appear within hyphae could not be determined because of their appearance coinciding with fragmentation.     

Mechanics of root growth

Summary A model is developed for the rate of elongation of a root tip in terms of the balance of pressures acting on the root. Differentials of this equation give expressions for the changes in root elongation rate with respect to soil water potential and soil mechanical resistance. The model predicts that root cells osmoregulate against both water stress and soil mechanical resistance with predicts that root cells osmoregulate against both water stress and soil mechanical resistance with similar efficiencies which are less than 100%. Analysis of published data leads to the conclusion that root tips of pea osmoregulate with 70% efficiency. A working equation is developed for the elongation rate of roots in conditions of combined water stress and mechanical resistance.     

Interrelationships among various measures of upper body strength assessed by different contraction modes Evidence for a general strength component

Two studies were conducted in 83 college men to determine the degree of generality of individual differences in upper body muscular strength assessed by different testing modes. In study 1 (N = 43), correlations were computed between four measures of upper body strength using the bench press movement, maximal isokinetic (0.09 rad.s-1), maximal fast (0.126 m.s-1) and slow (0.037 m.s-1) hydraulic, and one repetition maximum (1-RM) free weight bench press (BP). Compared to free weight BP, maximal strength during isokinetic and slow hydraulic BP was approximately 29% and approximately 8% larger, and fast hydraulic BP strength was approximately 63% lower (p less than 0.05). Simple linear regression of isokinetic BP on 1-RM BP yielded r = 0.79, error of prediction (SE) = 12%, and generality = 81%. The corresponding averaged values for the regression of slow and fast hydraulic BP on free weight 1-RM BP were r = 0.77, SE = 13.5%, and generality = 84%. In Study 2 (N = 40), testing included maximal isokinetic concentric and eccentric arm flexion and extension at 0.524, 1.570, and 2.094 rad.s-1. The ratio of concentric to eccentric torque at the 3 speeds averaged 0.68 (flexion) and 0.70 (extension), and eccentric torques were 32% and 30% greater than concentric torques (p less than 0.05). The linear regression between concentric vs. eccentric flexion and extension torques at the three velocities yielded an average r = 0.80, SE = 13.7%, and generality = 73%.(ABSTRACT TRUNCATED AT 250 WORDS)     

Gender difference in the relationship of performance in the handgrip and standing long jump tests to lean limb volume in young adults

Groups of young, adult males and females performed the handgrip and standing long jump tests. Their total forearm and leg volumes were calculated from a series of circumference and length measurements, and the lean volumes (bone + muscle) calculated by taking the skinfold thickness into consideration. In the handgrip, the mean female performance was 298 N compared with 496 N for the males. In the standing long jump, mean performance expressed as distance x body mass was 87.3 kg.m for females compared with 137.7 kg.m for males. These superior performances of males could simply reflect their greater muscle mass, as the mean lean volumes of female and male limbs respectively were 0.54 l and 0.89 l for forearms, and 11.82 l and 14.82 l for the two legs. However, when the performances of males and females were grouped by lean limb volume, it was found that while in both tests there were linear relationships, males and females did not share a common line. In both tests the male relationship was at a higher level than the female; therefore, for a given lean volume, the male performance was significantly superior to that of the female. The gender difference found in this study has not been seen in other studies in which the performance of skeletal muscle has been related to the cross-sectional area of the active muscles and the possible reasons for the differences are considered.