The Pressurized Porous Surface Model: An improved tool to study bacterial behavior under a wide range of environmentally relevant matric potentials

To study bacterial behavior under varying hydration conditions similar to surface soil, we have developed a system called the Pressurized Porous Surface Model (PPSM). Thin liquid films created by imposing a matric potential of − 0.4 MPa impact gene expression and colony development in Pseudomonas putida.     

Nitrogen and Phosphorus in the Finnish Energy System, 1900–2003

In producing power, humans move the nutrients nitrogen (N) and phosphorus (P) from their long‐term geological and biological stocks and release or emit them in soil, water, and the atmosphere. In Finland, peat combustion is an important driver of N and P fluxes from the environment to human economy. The flows of N and P in the Finnish energy system were quantified with partial substance flow analysis, and the driving forces of emissions of nitrogen oxides (NOx) were analyzed using the ImPACT model. In the year 2000 in Finland, 140,000 tonnes of nitrogen entered the energy system, mainly in peat and hard coal. Combustion released an estimated 66,000 tonnes of N as nitrogen oxides (NOx) and nitrous oxides (N2O) and another 74,000 tonnes as elemental N2. Most of the emissions were borne in traffic. At the same time, 6,000 tonnes of P was estimated to enter the Finnish energy system, mostly in peat and wood. Ash was mainly used in earth construction and disposed in landfills; thus negligible levels of P were recycled back to nature. During the twentieth century, fuel‐borne input of N increased 20‐fold, and of P 8‐fold. In 1900–1950, the increasing use of hard coal slowly boosted N input, whereas wood fuels were the main carrier of P. Since 1970, the fluxes have been on the rise. NOx emissions leveled off in the 1980s, though, and then declined in conjunction with improvements in combustion technologies such as NOx removal (de‐NOx) technologies in energy production and catalytic converters in cars.     

Conversion of cyanide to formate and ammonia by a pseudomonad obtained from industrial wastewater

Summary A cyanide-degrading pseudomonad was isolated by selective enrichment in a chemostat inoculated with coke-plant activated sludge and maintained at a dilution rate of 0.042/h for 60 days with a feed of 10 mg/l cyanide. The isolate, a facultative methylotroph capable of growth on methanol and methylamine, degraded cyanide to formate and ammonia; it could utilize the released ammonia as a nitrogen source but did not further metabolize formate under the experimental conditions employed. Both cyanide-degrading enzyme activity and respiratory resistance to cyanide were inducible and were enhanced by repeated exposure to the compound. Cell-free extracts stoichiometrically converted cyanide to formate and ammonia in a reaction that did not require oxygen. Enzyme activity, lost upon dialysis, was restored by less than equimolar ratios of NAD(P)H or ascorbate to cyanide, indicating that the reductants did not function directly as co-enzymes.     

A real-time database/models base/expert system in predictive microbiology

Summary This paper describes the development and operation of a database/models base/expert system funded by the Ministry of Agriculture, Fisheries and Food in the UK. As part of an on-going coordinated program on predictive microbiology, the system being established involves storage of data and models relevant to changes in populations of food-borne pathogens under given conditions. The system is due to be completed by March 1994.     

经济杀菌灭藻剂OACL控制工业循环水中有害微生物的研究

研究了经济杀菌灭藻剂OACL对异氧菌、硫酸盐还原菌和铁细菌的杀菌作用。结果表明,在实验室条件下,其杀菌率平均为99％以上,在pH5和pH7时分别为97.8％和88％。而在现场投药试验条件下为92％以上。可以认为,OACL是一种新型的、经济的高效杀菌灭藻剂。     

Evaluation of Fourier-transform infrared spectroscopy for data capture in predictive microbiology

Chemical changes in the medium, induced by the fermentative species Lactobacillus plantarum and Lactobacillus brevis and by the enzymatic action of a proteolytic, spoilage species, Yarrowia lipolytica, were analysed using Fourier-transform i.r. spectroscopy (FTIR). Changes in the absorbance data over time could be modelled using one of the more current predictive, mathematical models of microbial growth, such as the Gompertz equation. Moreover, a linear correlation between FTIR data (expressed as absorbance of some selected peaks) and viability data (expressed as log₁₀ c.f.u./g or ml) was observed during the fermentation process, both for L. plantarum and L. brevis.     

Chemicals from alternative feedstocks in the United States

Abstract: Growing industrial interest in products from renewable alternative feedstocks has resulted in the creation of more industry-led federal research and development programs. The basis of this interest is introduced, followed by an overview of the various federal programs that support basic through applied research relevant to chemical products from renewable resources, and evidence of the increased coordination efforts between programs. The majority of the paper outlines a new program within the U.S. Department of Energy, the Alternative Feedstocks Program, which specifically targets chemicals from renewables which have the potential to become part of the next generation of high-volume chemical feedstocks for the manufacturing industries. The first product of the program, an iterative process technology decision analysis tool, is broadly presented using the first process development project: succinic acid from fermentable sugars.     

Molecular genetic analysis of the response of three soil microbial communities to the application of 2, 4-D

The responses of three different soil microbial communities to the experimental application of 2, 4-dichlorophenoxyacetic acid (2, 4-D) were evaluated with a variety of molecular genetic techniques. Two of the three soil communities had histories of prior direct exposure to 2, 4-D, and one had no prior direct application of any herbicide. Dominant 2, 4-D degrading strains isolated from these soils the previous year were screened for hybridization with three catabolic genes (tfdA, tfdAII, and tfdB) cloned from the well-studied 2, 4-D degradative plasmid, pJP4, revealing varying degrees of similarity with the three genes. Hybridization of total community DNA from the three soils with the tfd gene probes also indicated that pJP4-like tfd genes were not harboured by a significant percentage of the community. Community level response was evaluated by the comparison of different treatments by Random Amplified Polymorphic DNA (RAPD) fingerprints and by community DNA cross-hybridization. No differences between treatments within the same soil were detected in any of the RAPD fingerprints generated with 17 primers. Community DNA cross-hybridization also indicated that the application of 2, 4-D at the applied rates did not quantitatively affect the structure of the soil microbial communities present in the three soils during the time-frame studied.     

Heavy metals (Cu and Zn) in recent sediments of Llangorse Lake,Wales: non-ferrous smelting,Napoleon and the price of wheat — a palaeoecological study

Elevated concentrations of Cu and Zn have been found in the upper part of three sediment cores collected from Llangorse Lake, in south Wales. Palaeomagnetic evidence from one of the cores and ²¹⁰Pb analysis of another, suggests that the increase in sediment Cu and Zn concentrations began during the eighteenth century. A sharp increase in the concentrations of these metals in the sediment profile appears to have occurred during the latter part of the eighteenth century and these concentrations remained high until the mid to late nineteenth century.The absence of known ore deposits and industry around the lake suggests that the lake and catchment soils were increasingly contaminated by long-range aerial transport of emissions from the expanding activity of Cu and Zn smelters located some 80 km upwind in the Swansea area during the Industrial Revolution. Evidence from agricultural crop returns indicates a significant increase in the amount of land devoted to tillage in the catchment, particularly to cereal production, during the late eighteenth and the first half of the nineteenth century which included the Napoleonic Wars. This agricultural shift appears to coincide with increased concentrations of Cu and Zn in the lake sediments. It is suggested that newly ploughed soils, contaminated with metals for many years by long-range aerial transport from the Swansea area, eroded, and were carried into the lake by catchment run-off and added to the sediment burden of Cu and Zn. A subsequent decline of Cu and Zn emissions due to the collapse of the non-ferrous smelting industry and reduced soil erosion because of a 50% reduction of tillage due to an agricultural depression in the second half of the 19th century may explain the fall in Cu and Zn concentrations in the upper part of the sediment profile. The most recent sediments (20th century) show the increase in heavy metals characteristic of many lakes around the world.     

Copper removal from an industrial waste by bioleaching

Summary Copper contained in a solid industrial waste produced in a silicone manufacturing process was leached with spent iron medium from aThiobacillus ferrooxidans culture. Most effective leaching was observed in a continuously fed, dual reactor system. Spent iron medium was generated by growingT. ferrooxidans in 0.9 K iron medium at pH 1.5 in the first reactor, and was transferred to a second reactor in which it leached the copper from the waste. Leaching was effective at a pulp density of the waste material as high as 20%. In experiments run at a pulp density of 2.5%, the spent iron medium was most efficient in leaching copper when it was first diluted 100-fold with a mineral salts solution at pH 1.5. Removal of the copper from the waste appeared to involve its displacement by acid, dissolved mineral salts, and ferric iron. Potentials for practical application of this process are discussed.