Segregation of infectious pancreatic necrosis resistance QTL in the early life cycle of Atlantic Salmon (Salmo salar)

In a previous study, three significant quantitative trait loci (QTL) associated with resistance to Infectious Pancreatic Necrosis (IPN) disease were identified by analysing challenge data from one sub-population of Landcatch Atlantic salmon (Salmo salar) smolt. While these QTL were shown to affect the resistance in seawater, their effect in freshwater was unknown. This study investigates the effect of these QTL on IPN resistance in salmon fry in freshwater. Twenty families with intermediate levels of IPN mortality were analysed from a freshwater challenge trial undertaken on a different sup-population of LNS salmon to that studied previously. Only the QTL from linkage group 21 (LG21) appeared to have a significant and large effect on resistance in freshwater; the same QTL was found to have the largest effect in seawater in the previous study. Variance component analysis showed a high heritability for the QTL: 0.45 ± 0.07 on the liability scale and 0.25 ± 0.05 on the observed scale. In a family where both parents were segregating for the QTL, there was a 0% vs. 100% mortality in homozygous offspring for resistant and susceptible QTL alleles. The finding that the same QTL has major effect in both freshwater and seawater has important practical implications, as this will allow the improvement of resistance in both phases through marker assisted selection by targeting this QTL. Moreover, the segregation of the LG21 QTL in a different sub-population gives further evidence of its association with IPN-resistance.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.     

A recombinant CHSE-214 cell line expressing an Mx1 promoter-reporter system responds to both interferon type I and type II from salmonids and represents a versatile tool to study the IFN-system in teleost fish

A transgenic cell line for the detection of salmon interferons (IFNs) has been established. It is based on a CHSE-214 cell line containing a reporter construct expressing firefly luciferase under the control of the rainbow trout promoter for the IFN-induced Mx1 gene. This cell line, named CHSE-Mx10, showed IFN-induced luciferase expression after more than 80 passages, confirming the stability of this cell line. Interestingly, the Mx promoter was shown to respond to both salmon IFN-alpha/beta and trout IFN-gamma in a dose-dependent manner, while there was no response to TNF-alpha and IL-1beta. IFN-alpha/beta activity could be measured at a range of 9-150 U/ml, and IFN-gamma showed activity between 10 and 100 ng/ml. The reproducibility of both responses was good. The CHSE-Mx10 reporter system constitutes a versatile tool to study the induction and regulation of IFN signaling in teleost fish. A preliminary study presented herein suggests that both infectious pancreas necrosis virus (IPNV) and salmon pancreas disease virus (SPDV) may block activation of the Mx promoter in CHSE-Mx10 stimulated with IFN-alpha/beta.     

有机农业在香港幼联园艺农场的实践

有机农业的研究及推广在香港仅有十余年的历史.实践证明,有机耕种技术在香港幼联园艺农场获得了很大的成功,并引起外国学术界的关注. 1 现代农业的弊端与传统农业的回顾 大多数的现代农业系统都基于短期的经济目的,其结果是导致发生土壤侵蚀和水土流失等问题.现代农业大量使用化学杀虫剂,对许多农业生态系统造成的不良影响是显而易见的,并产生了一系列生态问题,诸如空气、水和土壤污染,主要害虫再狷獗和次要害虫暴发,以及害虫的产生抗药性等.     

Epithelial Cadherin Determines Resistance to Infectious Pancreatic Necrosis Virus in Atlantic Salmon

Infectious pancreatic necrosis virus (IPNV) is the cause of one of the most prevalent diseases in farmed Atlantic salmon (Salmo salar). A quantitative trait locus (QTL) has been found to be responsible for most of the genetic variation in resistance to the virus. Here we describe how a linkage disequilibrium-based test for deducing the QTL allele was developed, and how it was used to produce IPN-resistant salmon, leading to a 75% decrease in the number of IPN outbreaks in the salmon farming industry. Furthermore, we describe how whole-genome sequencing of individuals with deduced QTL genotypes was used to map the QTL down to a region containing an epithelial cadherin (cdh1) gene. In a coimmunoprecipitation assay, the Cdh1 protein was found to bind to IPNV virions, strongly indicating that the protein is part of the machinery used by the virus for internalization. Immunofluorescence revealed that the virus colocalizes with IPNV in the endosomes of homozygous susceptible individuals but not in the endosomes of homozygous resistant individuals. A putative causal single nucleotide polymorphism was found within the full-length cdh1 gene, in phase with the QTL in all observed haplotypes except one; the absence of a single, all-explaining DNA polymorphism indicates that an additional causative polymorphism may contribute to the observed QTL genotype patterns. Cdh1 has earlier been shown to be necessary for the internalization of certain bacteria and fungi, but this is the first time the protein is implicated in internalization of a virus.     

Interpenetrating polymer network (IPN) hydrogel microspheres for oral controlled release application

Interpenetrating polymer network (IPN) hydrogel microspheres of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for oral controlled release delivery of a non-steroidal anti-inflammatory drug, diclofenac sodium (DS). The microspheres were prepared with various ratios of NaCMC to PVA, % drug loading and extent of crosslinking density at a fixed polymer weight. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acid and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results of this study suggest that DS loaded IPN microspheres were suitable for oral controlled release application.     

DNA/polyvinyl alcohol interpenetrating polymer network as stationary phase for thin layer chromatography

Natural DNA was introduced to thin layer chromatography (TLC) with an aim to separate chemicals like DNA-affinity compounds and enantiomers. By cross-linking polyvinyl alcohol (PVA) with glutaraldehyde (GA) and subsequent cross-linking DNA with a UV irradiation, a DNA/PVA interpenetrating polymer network (IPN) is formed and was used to coat the surface of the porous silica particles of the TLC. Three typical DNA-binding compounds and eight amino acid enantiomers were used as model chemicals to investigate the chromatographic behavior of the modified TLC, and high separation efficiency was observed in both classes of the chemicals. On the practical side, the DNA-modified TLC have high prospects in diverse applications, including efficacy evaluation of a medicine, toxicity assessment of a pollutant at the molecular level, as well as separation of enantiomers such as dyes, amino acids, peptides, proteins, nucleotides, and drugs.     

IPNs based on chitosan with NVP and NVP/HEMA synthesised through photoinitiator-free photopolymerisation technique for biomedical applications

Biocompatible interpenetration polymeric network (IPN) hydrogels based on chitosan with N-vinylpyrrolidinone (NVP) as well as its copolymer with 2-hydroxymethyl methacrylate (HEMA) were synthesised using the photopolymerisation technique without the inclusion of any photoinitiator or crosslinking agent. These hydrogels were characterised using the Fourier-transform infrared spectroscopy (FTIR) technique. Equilibrium swelling of these hydrogels was performed in Milli-Q water and drug release studies were carried out using theophylline as the model drug. These tests showed that the IPN comprised of chitosan and NVP with a very small amount of N-hydroxymethyl maleimide (HMMI) included exhibited higher swelling abilities and fast drug release rates than the IPN which contained chitosan, NVP and HEMA. Kinetic studies of water diffusion into these hydrogels and drug release revealed that with the exception of the IPN with HEMA incorporated, the other hydrogels did not adhere to the Fickian diffusion model. These hydrogels were tested for their biocompatibility with human epidermal keratinocyte cells (HaCaT). A positive cell growth as evidenced by the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) cell proliferation assay indicated that these hydrogels are non-toxic to human keratinocytes and can be potentially used as biomaterials for biomedical applications.     

The last step in cephalosporin C formation revealed: crystal structures of deacetylcephalosporin C acetyltransferase from Acremonium chrysogenum in complexes with reaction intermediates

Deacetylcephalosporin C acetyltransferase (DAC-AT) catalyses the last step in the biosynthesis of cephalosporin C, a broad-spectrum β-lactam antibiotic of large clinical importance. The acetyl transfer step has been suggested to be limiting for cephalosporin C biosynthesis, but has so far escaped detailed structural analysis. We present here the crystal structures of DAC-AT in complexes with reaction intermediates, providing crystallographic snapshots of the reaction mechanism. The enzyme is found to belong to the α/β hydrolase class of acetyltransferases, and the structures support previous observations of a double displacement mechanism for the acetyl transfer reaction in other members of this class of enzymes. The structures of DAC-AT reported here provide evidence of a stable acyl-enzyme complex, thus underpinning a mechanism involving acetylation of a catalytic serine residue by acetyl coenzyme A, followed by transfer of the acetyl group to deacetylcephalosporin C through a suggested tetrahedral transition state.     

Proteins of the penicillin biosynthesis pathway

Two sequential steps are common to the biosynthesis of all penicillin-derived antibiotics: the reaction of three l-amino acids to give lδ-(α-aminoadipoyl)-l-cysteinyl-d-valine, and the oxidation of this tripeptide to give isopenicillin N. Recent studies on the peptide synthetase and oxidase enzymes responsible for these steps have implications for the mechanisms and structures of related enzymes involved in a range of metabolic processes.