Methyl mercury uptake by free and immobilized cyanobacterium

Methyl mercury uptake in free cells and different immobilizates of the cyanobacteriumNostoc calcicola has been examined. The general growth of the immobilized cyanobacterial cells could be negatively correlated with methyl mercury uptake. Alginate spheres proved most efficient in terms of uptake rate (0.48 nmol mg protein^–1 min^–1, 10 min) and total bioaccumulation (10.71 nmol mg protein^–1, 1 h) with a bioconcentration factor of 3.3×10³. Alginate biofilms showed a faster methyl mercury accumulation rate (0.83 nmol mg protein^–1 min^–1, 10 min) with a saturation of 10.28 nmol mg protein^–1 reached within only 30 min (bioconcentration factor, 3.1×10³). Foam preparations with a slow initial uptake approximated biofilms but were characterized by a lower bioconcentration factor (2.8×10³). Free cells, in comparison, maintained the initial slow rate of uptake (0.62 nmol mg protein^–1 min^–1, 10 min), saturating at 30 min (8.81 nmol mg protein^–1), and the resultant lowest bioconcentration factor (2.7×10³). Cell ageing (30 days) brought a drastic reduction (3-fold) in organomercury uptake by free cells while alginate spheres maintained the same potential. Foam preparations of the same age showed a significant improvement in methyl mercury uptake followed by only a marginal decline in alginate biofilms. Data are discussed in the light of the physiological efficiency and longevity of immobilized cells.     

Actinomycete diversity associated with foaming in activated sludge plants

Large numbers of mycolic acid-containing actinomycetes were isolated from foam and scum samples taken from three activated-sludge sewage-treatment plants using several selective isolation media. Organisms presumptively identified as gordonae formed the dominant population in all of the samples. A representative set of these strains have chemical properties consistent with their classification in the genusGordona. Forty-eight of theGordona strains were compared through 165 unit characters with the type strains of validly described species ofGordona. The resultant data were examined using the Jaccard and simple matching coefficients and clustering achieved using the unweighted pair group method with arithmetic averages algorithm. The numerical classification was only marginally affected by the statistics used or by test error, estimated as 3.92%. The isolates were assigned to five multi-membered and 28 single-membered clusters defined by the simple matching coefficient at the 89% similarity level. With few exceptions, the isolates were sharply separated from theGordona marker strains. Essentially the same classification was obtained when the test strains were examined using a Curie-point pyrolysis mass spectrometric procedure. It can be concluded that the gordonae form a heterogeneous taxonomic group, the members of which can be distinguished from representatives of validly described species ofGordona.     

Synthesized β-cyclodextrin modified graphene oxide (β-CD-GO) composite for adsorption of cadmium and their toxicity profile in cervical cancer (HeLa) cell lines

In the current study, a composite material was constructed using β-cyclodextrin/graphene oxide (β-CD-GO) and was then applied for the purpose of eliminating cadmium (Cd) from aqueous solution. The synthesized β-CD-GO composite material was then subjected to characterization using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The batch study was conducted for the purpose of removing Cd(II). The results of the study revealed that the β-CD-GO composite material demonstrated a high adsorption capacity of 196 mg/g of Cd(II) at pH 7.0. Further, the adsorption of Cd(II) on the β-CD-GO followed pseudo second-order kinetics and equilibrium adsorption data, which fitted well to the Langmuir isotherm model. The evaluation of the toxicity of the synthesized β-CD-GO composite material was done by the examination of the cervical cancer (HeLa) cell lines. Increasing concentration of β-CD-GO composite material (50 μg to 200 μg) leads to a decline in the percentage of cell viability as from 74 % to 25 %. This study has suggested that the β-CD-GO could play an efficient and beneficial source of the adsorbent for the purpose of eliminating Cd(II) from aqueous solution.     

A nonsemen copulatory fluid influences the outcome of sperm competition in Japanese quail

Sperm competition is a powerful and widespread evolutionary force that drives the divergence of behavioural, physiological and morphological traits. Elucidating the mechanisms governing differential fertilization success is a fundamental question of sperm competition. Both sperm and nonsperm ejaculate components can influence sperm competition outcomes. Here, we investigate the role of a nonsemen copulatory fluid in sperm competition. Male Japanese quail possess a gland that makes meringue‐like foam. Males produce and store foam independent of sperm and seminal fluid, yet transfer foam to females during copulation. We tested whether foam influenced the outcome of sperm competition by varying foam state and mating order in competitive matings. We found that the presence of foam from one male decreased the relative fertilization success of a rival, and that foam from a given male increased the probability he obtained any fertilizations. Mating order also affected competitive success. Males mated first fertilized proportionally more eggs in a clutch and had more matings with any fertilizations than subsequent males. We conclude that the function of foam in sperm competition is mediated through the positive interaction of foam with a male's sperm, and we speculate whether the benefit is achieved through improving sperm storage, fertilizing efficiency or retention. Our results suggest males can evolve complex strategies to gain fertilizations at the expense of rivals as foam, a copulatory fluid not required for fertilization, nevertheless, has important effects on reproductive performance under competition.     

A computational study of the EN 1078 impact test for bicycle helmets using a realistic subject-specific finite element head model

Abstract

In the present study, the free fall impact test in accordance with the EN1078 standard for certification of bicycle helmets is replicated using numerical simulations. The impact scenario is simulated using an experimentally validated, patient-specific head model equipped with and without a bicycle helmet. Head accelerations and intracranial biomechanical injury metrics during the impacts are recorded. It is demonstrated that wearing the bicycle helmet during the impact reduces biomechanical injury metrics, with the biggest reduction seen in the metric for skull fracture.     

The effects of disinfectant foam on microbial biofilms

This investigation examined the effects of common aqueous biocides and disinfectant foams derived from them on Pseudomonas aeruginosa biofilms. Biofilms were grown on stainless steel coupons under standardised conditions in a reactor supplemented with low concentrations of organic matter to simulate conditions prevalent in industrial systems. Five-day-old biofilms formed under ambient conditions with continuous agitation demonstrated a low coefficient of variation (5.809%) amongst viable biofilm bacteria from independent trials. Scanning electron microscopy revealed biofilms on coupons with viable biofilm bacteria observed by confocal microscopy. An aqueous solution of a common foaming agent amine oxide (AO) produced negligible effects on bacterial viability in biofilms (p?>?0.05). However, significant biofilm inactivation was noted with aqueous solutions of common biocides (peracetic acid, sodium hypochlorite, sodium ethylenediaminetetraacetic acid) with or without AO (p?<?0.05). Aereation of a mixture of AO with each of these common biocides resulted in significant reductions in the viability of biofilm bacteria (p?<?0.05). In contrast, limited effects were noted by foam devoid of biocides. A relationship between microbial inactivation and the concentration of biocide in foam (ranging from 0.1?–?0.5%) and exposure period were noted (p?<?0.05). Although, lower numbers of viable biofilm bacteria were recovered after treatment with the disinfectant foam than by the cognate aqueous biocide, significant differences between these treatments were not evident (p?>?0.05). In summary, the studies revealed significant biofilm inactivation by biocidal foam prepared with common biocides. Validation of foam disinfectants in controlled trials at manufacturing sites may facilitate developments for clean in place applications. Advantages of foam disinfectants include reductions in the volumes of biocides for industrial disinfection and in their disposal after use.     

Macrophage lipoprotein lipase modulates the development of atherosclerosis but not adiposity

The role of macrophage lipoprotein lipase (LpL) in the development of atherosclerosis and adiposity was examined in macrophage LpL knockout (MLpLKO) mice. MLpLKO mice were generated using cre-loxP gene targeting. Loss of LpL in macrophages did not alter plasma LpL activity or lipoprotein levels. Incubation of apolipoprotein E (ApoE)-deficient β-VLDL with peritoneal macrophages from ApoE knockout mice lacking macrophage LpL (MLpLKO/ApoEKO) led to less cholesteryl ester formation than that found with ApoEKO macrophages. MLpLKO/ApoEKO macrophages had reduced intracellular triglyceride levels, with decreased CD36 and carnitine palmitoyltransferase-1 mRNA levels compared with ApoEKO macrophages, when incubated with VLDL. Although both MLpLKO/ApoEKO and ApoEKO mice developed comparable hypercholesterolemia in response to feeding with a Western-type diet for 12 weeks, atherosclerosis was less in MLpLKO/ApoEKO mice. Epididymal fat mass and gene expression levels associated with inflammation did not differ between the two groups. In conclusion, macrophage LpL plays an important role in the development of atherosclerosis but not adiposity.     

An amperometric lactate biosensor based on lactate dehydrogenase immobilized onto graphene oxide nanoparticles‐modified pencil graphite electrode

A novel amperometric lactate biosensor was developed based on immobilization of lactate dehydrogenase onto graphene oxide nanoparticles‐decorated pencil graphite electrode. The enzyme electrode was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy (FTIR), and cyclic voltammetry at different stages of its construction. The biosensor showed optimum response within 5 s at pH 7.3 (0.1 M sodium phosphate buffer) and 35°C, when operated at 0.7 V. The biosensor exhibited excellent sensitivity (detection limit as low as 0.1 μM), fast response time (5 s), and wider linear range (5–50 mM). Analytical recovery of added lactic acid in serum was between 95.81–97.87% and within‐batch and between‐batch coefficients of variation were 5.04 and 5.40%, respectively. There was a good correlation between serum lactate values obtained by standard colorimetric method and the present biosensor (r = 0.99). The biosensor measured lactate levels in sera of apparently healthy subjects and persons suffering from lactate acidosis and other biological materials (milk, curd, yogurt, beer, white wine, and red wine). The enzyme electrode lost 25% of its initial activity after 60 days of its regular uses, when stored dry at 4°C.     

Graphene oxide supported rhombic dodecahedral Cu2O nanocrystals for the detection of carcinoembryonic antigen

In this work, a simple electrochemical immunosensor was developed for the detection of carcinoembryonic antigen (CEA) based on rhombic dodecahedral Cu₂O nanocrystals–graphene oxide–gold nanoparticles (rCu₂O–GO–AuNPs). GO as the template and surfactant resulting in rCu₂O exhibit improved rhombic dodecahedral structure uniformity and excellent electrochemical performance. Moreover, GO was found to be able to effectively improve the long stability of rCu₂O on the electrode response. Under optimal conditions, the immunosensor showed a low limit of detection (0.004 ng ml⁻¹) and a large linear range (0.01–120 ng ml⁻¹). This work presents a potential alternative for the diagnostic applications of GO-supported special morphology materials in biomedicine and biosensors.     

Aptamer-graphene oxide for highly sensitive dual electrochemical detection of Plasmodium lactate dehydrogenase

A 90 mer ssDNA aptamer (P38) enriched against Plasmodium falciparum lactate dehydrogenase (PfLDH) through SELEX process was immobilized over glassy carbon electrode (GCE) using graphene oxide (GO) as an immobilization matrix, and the modified electrode was investigated for detection of PfLDH. The GO was synthesized from powdered pencil graphite and characterized by XRD based on the increased interlayer distance between graphitic layers from 0.345 nm for graphite to 0.829 nm for GO. The immobilization of P38 on GO was confirmed by I_D/I_G intensity ratio in Raman spectra where, the ratio were 0.67, 0.915, and 1.35 for graphite, GO and P38-GO, respectively. The formation of the P38 layer over GO-GCE was evident from an increase in the surface height in AFM analysis of the electrode from ∼3.5 nm for GO-GCE to ∼27 nm for P38-GO-GCE. The developed aptasensor when challenged with the target, a detection of as low as 0.5 fM of PfLDH was demonstrated. The specificity of the aptasensor was confirmed through a voltametric measurement at 0.65 V of the reduced co-factor generated from the PfLDH catalysis. Studies on interference from some common proteins, storage stability, repeatability and analysis of real samples demonstrated the practical application potential of the aptasensor.