Characterisation of a thermo-alkali-stable lipase from oil-contaminated soil using a metagenomic approach

Lipases are widely used for a variety of biotechnological applications. Screening these industrial enzymes directly from environmental microorganisms is a more efficient and practical approach than conventional cultivation-dependent methods. Combined with activity-based functional screening, six clones with lipase activity were detected and a gene (termed lipZ01) isolated from a target clone with the highest lipase activity was cloned from an oil-contaminated soil-derived metagenomic library and then sequenced. Gene lipZ01 was expressed in Pichia pastoris GS115 and the molecular weight of the recombinant lipase LipZ01 was estimated by electrophoresis analysis to be approximately 50 kDa. The maximum activity of the purified lipase was 42 U/mL, and the optimum reaction temperature and pH value were 45 °C and 8.0, respectively. The enzyme was highly stable in the temperature range 35–60 °C and under alkaline conditions (pH 7–10). The presence of Ca²⁺ and Mn²⁺ ions could significantly enhance the activity of the lipase. The purified lipase preferentially hydrolysed triacylglycerols with acyl chain lengths ≥8 carbon atoms, and the conversion degree of biodiesel production was nearly 92% in a transesterification reaction using olive oil and methanol. Some attractive properties suggested that the recombinant lipase may be valuable in industrial applications.     

Phosphorus removal coupled to bioenergy production by three cyanobacterial isolates in a biofilm dynamic growth system

In the present study a closed incubator, designed for biofilm growth on artificial substrata, was used to grow three isolates of biofilm-forming heterocytous cyanobacteria using an artificial wastewater secondary effluent as the culture medium. We evaluated biofilm efficiency in removing phosphorus, by simulating biofilm-based tertiary wastewater treatment and coupled this process with biodiesel production from the developed biomass. The three strains were able to grow in the synthetic medium and remove phosphorus in percentages, between 6 and 43%, which varied between strains and also among each strain according to the biofilm growth phase. Calothrix sp. biofilm turned out to be a good candidate for tertiary treatment, showing phosphorus reducing capacity (during the exponential biofilm growth) at the regulatory level for the treated effluent water being discharged into natural water systems.

Besides phosphorus removal, the three cyanobacterial biofilms produced high quality lipids, whose profile showed promising chemical stability and combustion behavior. Further integration of the proposed processes could include the integration of oil extracted from these cyanobacterial biofilms with microalgal oil known for high monounsaturated fatty acids content, in order to enhance biodiesel cold flow characteristics.     

Production of fuels and chemicals from renewable resources using engineered Escherichia coli

Biotechnological production of fuels and chemicals from renewable resources is an appealing way to move from the current petroleum-based economy to a biomass-based green economy. Recently, the feedstocks that can be used for bioconversion or fermentation have been expanded to plant biomass, microbial biomass, and industrial waste. Several microbes have been engineered to produce chemicals from renewable resources, among which Escherichia coli is one of the best studied. Much effort has been made to engineer E. coli to produce fuels and chemicals from different renewable resources. In this paper, we focused on E. coli and systematically reviewed a range of fuels and chemicals that can be produced from renewable resources by engineered E. coli. Moreover, we proposed how can we further improve the efficiency for utilizing renewable resources by engineered E. coli, and how can we engineer E. coli for utilizing alternative renewable feedstocks. e.g. C1 gases and methanol. This review will help the readers better understand the current progress in this field and provide insights for further metabolic engineering efforts in E. coli.     

Methoxylated fatty acids in Blumeria graminis conidia

The total fatty acids (FA) composition of Blumeria graminis f.sp. tritici conidia, the causal agent of wheat powdery mildew, was analyzed as a function of their age. A total of 19 FA (C12-C24 saturated and unsaturated) and unusual methoxylated fatty acids (mFA) were detected in young, intermediate and old conidia. Two very long chain methoxylated FA were identified by GC-MS as 3-methoxydocosanoic and 3-methoxytetracosanoic acids. Medium chain FA were predominant in young conidia (75%, including 13% of mFA) while very long chain fatty acids constituted the major compounds in old conidia (74%, including 30% of mFA). We have shown for the first time that the total FA composition is strongly correlated with the age of B. graminis f.sp. tritici (Bgt) conidia.     

Substrate specificity and preference of Delta6-desaturase of Mucor rouxii

The Delta(6)-fatty acid desaturase is a key enzyme in the synthesis of an important fatty acid, gamma-linolenic acid. We have characterized, by heterologous expression in Saccharomyces cerevisiae, substrate specificity and preference of Delta(6)-desaturase of Mucor rouxii. Fatty acid supplementation was carried out based on the predicted enzyme topology, fatty acid phenotype and the corresponding metabolic pathway in M. rouxii. The enzyme has a broad substrate specificity as based on C15-C18. The result also supported classification of the M. rouxii Delta(6)-desaturase into a front-end desaturase. Interestingly, a relatively rare activity based on odd acyl chains and not described previously in other eukaryotic Delta(6)-desaturases was also observed.     

Conventional and Molecular Identification of Bacteria with Magnesite Enrichment Potential from Local Quarries in Erzurum

In this study, the bacteria having ore enrichment potential were isolated from three different magnesite quarries located in Erzurum-Askale borderlines. The obtained isolates were identified and characterized according to the conventional (morphological, physiological and biochemical tests) and molecular techniques (fatty acid methyl ester profiles (FAME), BOX PCR and 16S rDNA). According to sequence analysis, they were determined as Exiguobacterium aurantiacum (4), Exiguobacterium sibiricum (2), Bacillus sp. (2), Staphylococcus epidermidis (2), Staphylococcus haemolyticus (1), Shewanella baltica (1) and Klebsiella oxytoca (1), respectively.     

Analysis of composition and structure of <Emphasis Type="Italic">Clostridium thermocellum</Emphasis> membranes from wild-type and ethanol-adapted strains

Clostridium thermocellum is a candidate organism for consolidated bioprocessing of lignocellulosic biomass into ethanol. However, commercial use is limited due to growth inhibition at modest ethanol concentrations. Recently, an ethanol-adapted strain of C. thermocellum was produced. Since ethanol adaptation in microorganisms has been linked to modification of membrane lipids, we tested the hypothesis that ethanol adaptation in C. thermocellum involves lipid modification by comparing the fatty acid composition and membrane anisotropy of wild-type and ethanol-adapted strains. Derivatization to fatty acid methyl esters provided quantitative lipid analysis. Compared to wild-type, the ethanol-adapted strain had a larger percentage of fatty acids with chain lengths >16:0 and showed a significant increase in the percentage of 16:0 plasmalogens. Structural identification of fatty acids was confirmed through mass spectral fragmentation patterns of picolinyl esters. Ethanol adaptation did not involve modification at sites of methyl branching or the unsaturation index. Comparison of steady-state fluorescence anisotropy experiments, in the absence and presence of ethanol, provided evidence for the effects of ethanol on membrane fluidity. In the presence of ethanol, both strains displayed increased fluidity by approximately 12%. These data support the model that ethanol adaptation was the result of fatty acid changes that increased membrane rigidity that counter-acted the fluidizing effect of ethanol.     

贺兰山不同海拔典型植被带土壤微生物多样性

土壤微生物多样性在海拔梯度的分布格局研究近年来受到和植物动物一样的重视程度,但是干旱风沙区微生物多样性在海拔梯度上的多样性分布规律尚未揭示。本研究以处于干旱风沙区的贺兰山不同海拔的六个典型植被带（荒漠草原带、山地旱生灌丛带、温性针叶林带、针阔混交林带、寒温性针叶林带和亚高山草甸带）土壤为研究对象,利用Biolog微平板法和磷脂脂肪酸甲酯法(FAMEs)系统研究微生物多样性群落特征以及在不同植被带分布规律。结果表明：土壤微生物功能多样性随海拔增加发生变化,且微生物群落结构存在显著差异。Biolog分析显示土壤微生物群落代谢活性依次是：亚高山草甸>寒温性针叶林>针阔混交林>温性针叶林>山地旱生灌丛>荒漠草原,随海拔的升高土壤微生物群落物种丰富度指数（H）和均匀度指数（E）总体上均表现出增大的趋势,差异显著（P＜0.05）;FAMEs分析表明不同海拔的微生物区系发生了一定程度的变化,寒温性针叶林土壤微生物磷酸脂肪酸生物标记的数量和种类均最高,且细菌、真菌特征脂肪酸相对含量也最高;土壤微生物群落结构多样性次序是：寒温性针叶林带>针阔混交林带>温性针叶林带>亚高山草甸>山地旱生灌丛>荒漠草原。本研究结果表明贺兰山海拔梯度的微生物多样性分布规律不同于已有的植物多样性“中部膨胀”研究结果,这说明在高海拔地区有更多的适合该生境的微生物存在,这对维持干旱风沙区的生态系统功能稳定性具有重要意义。     

GC/MS identification and quantification of constituents of bacterial lipids and glycoconjugates obtained after methanolysis as heptafluorobutyrate derivatives

In previous articles [Anal. Biochem. 284 (2000) 201; J. Lipid Res. 43 (2002) 794], we reported that the GC/MS identification and quantification of nearly all constituents of glycolipids could be obtained on the same sample in a single GC/MS analysis as heptafluorobutyrate derivatives of the products liberated using acid-catalyzed methanolysis. The same type of data could be obtained on glycoproteins and proteoglycans [Biochemistry 42 (2003) 8342]. These experiments were performed on material from higher organisms, and there was no evidence that bacteria-specific constituents could also be identified and quantified. The current article reports that the GC/MS analysis of compounds liberated by acid-catalyzed methanolysis as heptafluorobutyrate derivatives allows the simultaneous qualitative and quantitative determinations of pentoses, deoxyhexoses, hexoses, hexosamines, uronic acids, Kdo, Mur, heptose, Kdn, and neuraminic acid as well as of most fatty acids (including hydroxylated fatty acids). This approach provides a way of obtaining fingerprints of bacterial constituents and quantification of the overall effect of gene inactivation or of culture conditions.     

Evaluation of high salinity adaptation for lipid bio-accumulation in the green microalga Chlorella vulgaris

Aiming at the reutilizing wastewater for algal growth and biomass production, a saline water rejected from reverse osmosis (RO) facility (salinity 67.59 g L⁻¹) was used to cultivate the pre-adapted green microalga Chlorella vulgaris. The inoculum was prepared by growing cells in modified BG-11 medium, and adaptation was performed by applying a gradual increase in salinity (56.0 g L⁻¹ NaCl and 125 ppm FeSO₄·7H₂O) to the culture in 200 L photobioreactor. Experiments using the adapted alga were performed using original-rejected water (ORW) and treated rejected water (TRW) comparing with the recommended growth medium (BG-11). The initial salinity of ORW was chemically reduced to 39.1 g L⁻¹ to obtain TRW. Vertical photobioreactors (15 L) was used for indoor growth experiments. Growth in BG-11 resulted in 1.23 g L⁻¹, while the next adaptation growth reached 2.14 g L⁻¹ of dry biomass. The dry weights of re-cultivated Chlorella after adaptation were 1.49 and 2.19 g L⁻¹ from ORW and TRW; respectively. The cellular oil content was only 12% when cells grown under control conditions verses to 14.3 and 15.42% with original and treated water, respectively. Induction of stress affected the fatty acid methyl esters (FAMEs) profile and the properties of the resulting biodiesel. The present results indicated that induction of stress by high salinity improves the quality of FAMEs that can be used as a promising biodiesel fuel.