Formation of spray-dried powder of S-adenosyl-L-methionine

S-Adenosyl-L -methionine (SAM) is an essential metabolite in all living organisms. In clinical research, SAM has also been suggested as a chemotherapeutic agent in various diseases. The main problem of SAM is its instability at high temperatures, at neutral and alkaline pH, and in the presence of humidity. SAM retention in spray-dried powder was determined under various conditions of spray-drying. The highest SAM retention was obtained when maltodextrin (dextrose equivalent, DE, of 25) was used as the carrier solid with the SAM feed liquid at pH 4.0. The water content in the powder had a significant effect on the stability of SAM. SAM powder with lower water content exhibited higher stability.     

Geometric morphometric analysis of the effect of temperature on wing size and shape in Aedes albopictus

Wing geometry helps to identify mosquito species, even cryptic ones. On the other hand, temperature has a well‐known effect on insect metric properties. Can such effects blur the taxonomic signal embedded in the wing? Two strains of Aedes albopictus (laboratory and field strain) were examined under three different rearing temperatures (26, 30 and 33 °C) using landmark‐ and outline‐based morphometric approaches. The wings of each experimental line were compared with Aedes aegypti. Both approaches indicated similar associations between wing size and temperature. For the laboratory strain, the wing size significantly decreased as the temperature increased. For the field strain, the largest wings were observed at the intermediate temperature. The two morphometric approaches describing shape showed different sensibilities to temperature. For both strains and sexes, the landmark‐based approach disclosed significant wing shape changes with temperature changes. The outline‐based approach showed lesser effects, detecting significant changes only in laboratory females and in field males. Despite the size and shape changes induced by temperature, the two strains of Ae. albopictus were always distinguished from Ae. aegypti. The present study confirms the lability of size. However, it also suggests that, despite environmentally‐induced variation, the architecture of the wing still provides a strong taxonomic signal.     

On-Chip Endothelial Inflammatory Phenotyping

Atherogenesis is potentiated by metabolic abnormalities that contribute to a heightened state of systemic inflammation resulting in endothelial dysfunction. However, early functional changes in endothelium that signify an individual''s level of risk are not directly assessed clinically to help guide therapeutic strategy. Moreover, the regulation of inflammation by local hemodynamics contributes to the non-random spatial distribution of atherosclerosis, but the mechanisms are difficult to delineate in vivo. We describe a lab-on-a-chip based approach to quantitatively assay metabolic perturbation of inflammatory events in human endothelial cells (EC) and monocytes under precise flow conditions. Standard methods of soft lithography are used to microfabricate vascular mimetic microfluidic chambers (VMMC), which are bound directly to cultured EC monolayers.¹ These devices have the advantage of using small volumes of reagents while providing a platform for directly imaging the inflammatory events at the membrane of EC exposed to a well-defined shear field. We have successfully applied these devices to investigate cytokine-,² lipid-^{3, 4} and RAGE-induced⁵ inflammation in human aortic EC (HAEC). Here we document the use of the VMMC to assay monocytic cell (THP-1) rolling and arrest on HAEC monolayers that are conditioned under differential shear characteristics and activated by the inflammatory cytokine TNF-α. Studies such as these are providing mechanistic insight into atherosusceptibility under metabolic risk factors.     

Operation of a Benchtop Bioreactor

Fermentation systems are used to provide an optimal growth environment for many different types of cell cultures. The ability afforded by fermentors to carefully control temperature, pH, and dissolved oxygen concentrations in particular makes them essential to efficient large scale growth and expression of fermentation products. This video will briefly describe the advantages of the fermentor over the shake flask. It will also identify key components of a typical benchtop fermentation system and give basic instruction on setup of the vessel and calibration of its probes. The viewer will be familiarized with the sterilization process and shown how to inoculate the growth medium in the vessel with culture. Basic concepts of operation, sampling, and harvesting will also be demonstrated. Simple data analysis and system cleanup will also be discussed.     

A simple,band‐mounted device to measure behaviorally modified thermal microclimates experienced by birds

Birds encounter climate at the scale of microclimates that can vary rapidly in time and space and so understanding potential vulnerability and adaptations to those microclimates requires fine‐scale measurements that accurately track thermal exposures. However, few options exist for recording the microclimates actually experienced by birds (realized microclimates). We constructed and tested a simple, low‐cost, temperature logger for recording the realized microclimates of ground‐nesting birds. We developed attachment protocols for band‐mounting Thermochron iButtons on Ring‐billed Gull (Larus delawarensis) chicks. We tested these mounted, temperature‐logging devices on 20 chicks weighing > 200 g (device weight was 4 g), attaching devices for 48 h and observing behavior before and after attachment and removal. Devices recorded temperature immediately surrounding the leg at 2‐min intervals. Recorded temperatures were strong predictors of observed thermoregulatory behaviors (panting and sitting), outperforming predictions based on air temperatures measured by basic, static approaches. Through comparison with matched controls (chicks with just a band), we detected no adverse physiological effects of devices, no effects on social or feeding behavior, and only a short‐term decrease in inactivity immediately after device attachment (likely due to increased preening). By attaching iButtons to the legs of birds, we quantified realized thermal exposure, integrating air temperature, modes of environmental heat transfer, and bird behavior at microclimatic scales. Although not yet validated for broader use, our approach (including possible miniaturization) should be suitable to measure thermal exposure of adults, not just chicks, allowing collection of data concerning thermal exposures during flight under field conditions. At ~ $25 USD per device, our approach facilitates experimental protocols with robust sample sizes, even for relatively modest budgets.     

ECM Protein Nanofibers and Nanostructures Engineered Using Surface-initiated Assembly

The extracellular matrix (ECM) in tissues is synthesized and assembled by cells to form a 3D fibrillar, protein network with tightly regulated fiber diameter, composition and organization. In addition to providing structural support, the physical and chemical properties of the ECM play an important role in multiple cellular processes including adhesion, differentiation, and apoptosis. In vivo, the ECM is assembled by exposing cryptic self-assembly (fibrillogenesis) sites within proteins. This process varies for different proteins, but fibronectin (FN) fibrillogenesis is well-characterized and serves as a model system for cell-mediated ECM assembly. Specifically, cells use integrin receptors on the cell membrane to bind FN dimers and actomyosin-generated contractile forces to unfold and expose binding sites for assembly into insoluble fibers. This receptor-mediated process enables cells to assemble and organize the ECM from the cellular to tissue scales. Here, we present a method termed surface-initiated assembly (SIA), which recapitulates cell-mediated matrix assembly using protein-surface interactions to unfold ECM proteins and assemble them into insoluble fibers. First, ECM proteins are adsorbed onto a hydrophobic polydimethylsiloxane (PDMS) surface where they partially denature (unfold) and expose cryptic binding domains. The unfolded proteins are then transferred in well-defined micro- and nanopatterns through microcontact printing onto a thermally responsive poly(N-isopropylacrylamide) (PIPAAm) surface. Thermally-triggered dissolution of the PIPAAm leads to final assembly and release of insoluble ECM protein nanofibers and nanostructures with well-defined geometries. Complex architectures are possible by engineering defined patterns on the PDMS stamps used for microcontact printing. In addition to FN, the SIA process can be used with laminin, fibrinogen and collagens type I and IV to create multi-component ECM nanostructures. Thus, SIA can be used to engineer ECM protein-based materials with precise control over the protein composition, fiber geometry and scaffold architecture in order to recapitulate the structure and composition of the ECM in vivo.     

High Yield Synthesis of Nitriles by a New Enzyme,Phenylacetaldoxime Dehydratase,from Bacillus sp. Strain OxB-1

3-Phenylpropionitrile was synthesized from Z-3-phenylpropionaldoxime (0.75 M) in a quantitative yield (98 g/l) by the use of cells of Eschrichia coli JM 109/pOxD-9OF, a transformant harboring a gene for a new enzyme, phenylacetaldoxime dehydratase, from Bacillus sp. strain OxB-1. Other arylalkyl- and alkyl-nitriles were also synthesized in high yields from the corresponding aldoximes. Moreover, 3-phenylpropionitrile was successfully synthesized by the recombinant cells in 70 and 100% yields from 0.1 M unpurified E/Z-3-phenylpropionaldoxime, which is spontaneously formed from 3-phenylpropionaldehyde and hydroxylamine in a butyl acetate/water biphasic system and aqueous phase, respectively.     

A cytogenetic characterization comparing a rat 6TG-resistant strain and 6TG-sensitive clones

Summary A 8.3 /ml 6-thioguanine (6TG)-resistant strain was isolated from a rat tetraploid cell line by step-by-step selection in 6TG-medium. In the 6TG-resistant cell population 51% of the cells were tetraploid and 35% of the cells were hypertetraploid, i.e., one chromosome more than a tetraploid. The 6TG-resistant strain grew very well in RPMI 1640 medium with intervals of three days between subcultures. The 6TG-resistant cells all have a homogeneously staining region (HSRs) in one of the X chromosomes which do not stain after chromosome C-banding. They also possess a higher NORs activity and much lower frequency of sister chromatid exchanges (SCE). When the 6TG-resistant RCT cells were subcultured in 6TG-free medium for three days, their SCE frequency did not change. 5-bromodeoxyuridine (BrdU) significantly suppressed the NORs activity for both 6TG-resistant cells and 6TG-sensitive cells (P<0.001).Abbreviations 6TG 6-thioguanine - HSRs homogeneously staining region - NORs nucleolar organizer region - SCE sister chromatid exchange - BrdU 5-bromodeoxyuridine - HPRT Hypoxanthine phosphoribosyl transferase     

Structural organization of cholera toxin gene and its expression in an environmental non-pathogenic strain ofVibrio cholerae

Non-pathogenic, environmental strain ofVibrio cholerae, ELTOR Ogawa EW6 carries a copy of the cholera toxin gene in its chromosome. Restriction enzyme digestion followed by Southern blot analysis revealed that the structure of the cholera toxin gene in this organism is different from that found in the virulent strains. The xbaI site which has been found to be conserved in the cholera toxin of the virulent strains examined so far, is absent here. Results of the RNA dot blot analysis indicated that the cholera toxin gene in EW6 is transcribed much less efficiently compared to the cholera toxin gene present in the virulent strainVibrio cholerae classical Inaba 569B.     

Loading patterns and jaw movements during mastication in Macaca fascicularis: a bone-strain, electromyographic, and cineradiographic analysis

Rosette strain gage, electromyography (EMG), and cineradiographic techniques were used to analyze loading patterns and jaw movements during mastication in Macaca fascicularis. The cineradiographic data indicate that macaques generally swallow frequently throughout a chewing sequence, and these swallows are intercalated into a chewing cycle towards the end of a power stroke. The bone strain and jaw movement data indicate that during vigorous mastication the transition between fast close and the power stroke is correlated with a sharp increase in masticatory force, and they also show that in most instances the jaws of macaques are maximally loaded prior to maximum intercuspation, i.e. during phase I (buccal phase) occlusal movements. Moreover, these data indicate that loads during phase II (lingual phase) occlusal movements are ordinarily relatively small. The bone strain data also suggest that the duration of unloading of the jaw during the power stroke of mastication is largely a function of the relaxation time of the jaw adductors. This interpretation is based on the finding that the duration from 100% peak strain to 50% peak strain during unloading closely approximates the half-relaxation time of whole adductor jaw muscles of macaques. The EMG data of the masseter and medial pterygoid muscles have important implications for understanding both the biomechanics of the power stroke and the external forces responsible for the "wishboning" effect that takes place along the mandibular symphysis and corpus during the power stroke of mastication. Although both medial pterygoid muscles reach maximum EMG activity during the power stroke, the activity of the working-side medial pterygoid peaks after the balancing-side medial pterygoid. Associated with the simultaneous increase of force of the working-side medial pterygoid and the decrease of force of the balancing-side medial pterygoid is the persistently high level of EMG activity of the balancing-side deep masseter (posterior portion). This pattern is of considerable significance because the direction of force of both the working-side medial pterygoid and the balancing-side deep masseter are well aligned to aid in driving the working-side lower molars across the upper molars in the medial direction during unilateral mastication.(ABSTRACT TRUNCATED AT 400 WORDS)