High frequency residues: A new set of signals for detectability studies of an X-ray imaging system

A new set of signals for studying detectability of an X-ray imaging system is presented. The results obtained with these signals are intended to complement the NEQ results.The signals are generated from line spread profiles by progressively removing their lower frequency components and the resulting high frequency residues (HFRs) form the set of signals to be used in detectability studies. Detectability indexes for these HFRs are obtained using a non-prewhitening (NPW) observer and a series of edge images are used to obtain the HFRs, the covariance matrices required by the NPW model and the MTF and NPS used in NEQ calculations. The template used in the model is obtained by simulating the processes of blurring and sampling of the edge images. Comparison between detectability indexes for the HFRs and NEQ are carried out for different acquisition techniques using different beam qualities and doses.The relative sensitivity shown by detectability indexes using HFRs is higher than that of NEQ, especially at lower doses. Also, the different observers produce different results at high doses: while the ideal Bayesian observer used by NEQ distinguishes between beam qualities, the NPW used with the HFRs produces no differences between them.Delta functions used in HFR are the opposite of complex exponential functions in terms of their support in the spatial and frequency domains. Since NEQ can be interpreted as detectability of these complex exponential functions, detectability of HFRs is presented as a natural complement to NEQ in the performance assessment of an imaging system.     

Evaluation of microwave hyperthermia applicators.

Hyperthermia has been used in conjunction with radiation and chemotherapy for cancer treatment. When using electromagnetic heating, applicators are critical components in contact with or in proximity to patients and can be the determining factor for effective and safe treatment. Tissue absorption of electromagnetic energy is determined by many factors. Three cases are shown to illustrate the complexity of microwave heating: 1) The BSD MA-151 applicator has good center heating on a muscle-only phantom as shown in the operation manual. When fat slabs of 0.25, 0.5, 1, and 2 cm thick were added, two hot spots near the periphery of the applicator were evident on all fat surfaces, exposed at 631 MHz. At 915 MHz, the heating was elongated on the surface of the models with 0.25- and 2-cm fat, and two hot spots were observed on the 0.5- and 1-cm fat surfaces. 2) Heating patterns of the Clini-Therm applicators on a muscle-only phantom, as indicated in the operations guide, are elliptical with their major axes perpendicular to the electric field. However, when a bolus is used, the elliptical pattern is parallel to the E field. 3) Heating patterns in cylindrical structures were studied with inhomogeneous models of limbs. Arm and thigh models consisting of fat, bone, and muscle material were heated with Clini-Therm L, M, and MS applicators at 915 MHz. In addition to the geometric effect, the results indicated that placing the applicators with E field parallel to the long axis of cylindrical structures can minimize required power, produce less heating of fats and reduce stray radiation. In conclusion, to apply penetrating microwave or other RF fields for tissue heating, one must simulate the clinical exposure conditions as closely as possible to obtain useful heating patterns.     

Computer-aided three-dimensional reconstructions of the arrangement of primary spermatocytes in human seminiferous tubules

Summary With the use of a digital image-processing method three-dimensional reconstructions of the arrangement of spermatocytes in human seminiferous tubules were performed. With this method it was possible to investigate the cellular distribution in the tubule in nearly any given perspective and projection. In addition, by means of simple mathematical procedures, such as by transformation of Cartesian coordinates into cylindrical coordinates, it was possible to vary the shape of a reconstruction, i.e., to convert the cylindrical image of a tubular portion into a right-angled r--z-representation.The present work not only confirms the existence of a complex helical plan of organization of the human seminiferous epithelium but also provides further aspects of the phenomenon of physiological germ-cell loss and its integration into the kinetics of spermatogenesis.Dedicated to Prof. E.C. Roosen-Runge, Seattle, on the occasion of his 75th birthday     

Cineanthropometric Study in Spanish Judoists

Anthropometric characteristics of proportionality, body composition and somatotype have been determined in a group of 72 Spanish judoists. The sample includes the junior male and female National Team, and seniors competitors in the last Olimpic Games held in 1992, and participants in the National Championship of 1993. The methodology has been used according to Weiner and Lourie(1981)and MOGAP procedures described by Borms et al. (1979). The obtained results show a similar proportionality profile and mesoendomorphic mean somatotype in both male and female series. However, were found significant differences between sexes as well as depending of weight categories.     

仿脑组织体模研究进展

仿脑组织体模是指可以有效模拟人脑组织形状、性质的等效材料组织或数字模型,可以在实验中代表人脑组织的某些生理特性从而达到特定的研究目标,根据其物理形态,通常可分为固体、液体、数字体模3类。仿脑组织体模具有安全经济,配置简单并且可重复使用的优势,被广泛应用于脑部疾病诊断、系统安全性评估等研究。本文就仿脑组织体模的分类、物理特性和脑科学研究应用3方面进行论述,在阐述当前仿脑组织体模与真实脑组织存在一定性质差异的同时也说明其在替代真实脑组织实验上有良好的应用前景。     

Absence of radiofrequency heating from auditory implants during magnetic resonance imaging

The possibility of tissue heating due to an auditory brainstem implant (ABI) or a modified cochlear implant (CI) during magnetic resonance imaging (MRI) of the head was tested on a full-sized human phantom using a realistic phantom head consisting of simulated skull, brain, and muscle. Dielectric properties of the brain, muscle, and bone materials were similar to those of human tissues at 64 MHz. The body consisted of homogeneous phantom muscle enclosed in a human-shaped fiberglass shell. Thermographic and fiber-optic temperature measurements were conducted to reveal any heating. Thermograms of sagittal, frontal, and horizontal planes of the head with the ABI and CI electrodes were taken immediately before and after a 26 min MRI scan. The MRI sequence was set at 94 excitations and 25 ms echo time to induce maximum radiofrequency heating, as suggested by the General Electric Company. The difference of these two thermograms gives the heating results. In two uncut phantom heads, Teflon tubes were placed along the implanted ABI and CI, and temperature data were recorded via fiber-optic probes before, during, and after the MRI. Results showed no observable heating associated with the ABI and the modified CI during worst-case MRI of the head. © 1995 Wiley-Liss, Inc.     

Dual-energy contrast-enhanced digital mammography: Glandular dose estimation using a Monte Carlo code and voxel phantom

PurposeTo estimate the mean glandular dose of contrast enhanced digital mammography, using the EGSnrc Monte Carlo code and female adult voxel phantom.MethodsAutomatic exposure control of full field digital mammography system was used for the selection of the X-ray spectrum and the exposure settings for dual energy imaging. Measurements of the air-kerma and of the half value layers were performed and a Monte Carlo simulation of the digital mammography system was used to compute the mean glandular dose, for breast phantoms of various thicknesses, glandularities and for different X-ray spectra (low and high energy).ResultsFor breast phantoms of 2.0–8.0 cm thick and 0.1–100% glandular fraction, CC view acquisition, from AEC settings, can result in a mean glandular dose of 0.450 ± 0.022 mGy −2.575 ± 0.033 mGy for low energy images and 0.061 ± 0.021 mGy – 0.232 ± 0.033 mGy for high energy images. In MLO view acquisition mean glandular dose values ranged between 0.488 ± 0.007 mGy – 2.080 ± 0.021 mGy for low energy images and 0.065 ± 0.012 mGy – 0.215 ± 0.010 mGy for high energy images.ConclusionThe low kV part of contrast enhanced digital mammography is the main contributor to total mean glandular breast dose. The results of this study can be used to provide an estimated mean glandular dose for individual cases.     

Survey of chest radiography systems: Any link between contrast detail measurements and visual grading analysis?

PurposeTo evaluate image quality of chest radiography for a number of systems in Belgium, using a contrast-detail (c-d) test object and Visual Grading Analysis (VGA) of an anthropomorphic phantom.MethodsThe study comprised 22 chest imaging systems in Belgium. C-d data were measured using Leeds TO20 test object, imaged using poly(methyl methacrylate) (PMMA) thicknesses of 9, 13 and 16 cm. Images of the Lungman phantom, with additional tissue-equivalent chest plates to represent different patient sizes, were then acquired. Perceived image quality was evaluated using VGA by three radiologists. Images were acquired at a patient equivalent position with system-specific exposure settings for Posterior-Anterior chest protocol. Incident air kerma (IAK) was measured using a solid-state dosemeter.ResultsC-d results showed large differences between the systems. Total number of visible discs ranged from 38 to 83 (for 9 cm PMMA) with a consistent average drop of 10% as PMMA thickness was systematically increased. However, no correlation was found between number of visible discs and IAK. Perceived image quality scored by the readers from the Lungman images decreased with increasing phantom thickness, however no correlation of VGA score with IAK was seen. Moderate correlation was found between the VGA score of one of the readers and the TO20 results, and no correlation for the rest.ConclusionsThe spread in dose and image quality measures was high and no correlation was seen between either image quality measure and IAK, suggesting the need for optimization. A more powerful tool is required for task-based optimization in chest radiography.