Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

肝素钠的生产及其存在的问题及解决的方法（Ⅱ）

本文就粗品肝素钠生产的原料控制硬件设施管理和环保等方面进行了论述，介绍了一些改进的方法和措施，并就该方面的的一些问题进行了探讨，提出了解决的方法。     

How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.     

Feedbacks between nutrient cycling and vegetation predict plant species coexistence and invasion

To investigate the role of species‐specific litter decomposability in determining plant community structure, we constructed a theoretical model of the codevelopmental dynamics of soil and vegetation. This model incorporates feedback between vegetation and soil. Vegetation changes the nutrient conditions of soil by affecting mineralization processes; soil, in turn, has an impact on plant community structure. The model shows that species‐level traits (decomposability, reproductive and competitive abilities) determine whether litter feedback effects are positive or negative. The feedback determines community‐level properties, such as species composition and community stability against invasion. The model predicts that positive feedback may generate multiple alternative steady states of the plant community, which differ in species richness or community composition. In such cases, the realized state is determined by initial abundance of co‐occurring species. Further, the model shows that the importance of species‐level traits depends on environmental conditions such as system fertility.     

Continuity and Creativity in Iroquois Beadwork

This review essay of Across Borders: Beadwork in Iroquois Life focuses on the display of beadwork as a cultural practice that has evolved significantly throughout its history while remaining central to Iroquois identity. The exhibition draws on historical documentation, objects, and imagery that depict the varied uses of beadwork as ritual objects, sources of income, markers of identity, and as works of art. The content and narrative for the display was developed through a broad collaboration between curators, scholars, artists, and members of two Iroquois communities. The changing and continued importance of beadwork is reflected in the adaptation of materials and styles for different forms of production and use. Across Borders places Iroquois beadwork in a broad context while concentrating on specific forms and meanings that are attached to beadwork, whether created in community gatherings or by individual artists.     

Sediment transport in an inland river in North Queensland

Rivers in northern Queensland are ephemeral and carry water mainly as a direct response to heavy rainfall. Sediment is transported downstream with the runoff and sediment deposition may be a major problem in many proposed reservoirs. Hence information about sediment transport, particularly under high flow conditions, is required for planning and design of water storage reservoirs. In this region, bed material samples can be obtained during low flow periods and suspended sediment sampling during floods is possible but only with difficulty. Little reliable data is available.This paper outlines a possible approach to predicting sediment loads in such rivers. Suspended sediment samples have been analysed to give both particulate concentrations and their grain size distributions. The latter have been compared with bed material size distributions, and the concentrations of suspended bed material and wash load components have been estimated.After investigations of a number of methods for predicting bed material transport, those which treat bed load and suspended load independently have been selected. Field data have been used to determine the wash load and the suspended bed material load. The bed load was then computed so that the total sediment load could be determined.This approach has been applied to the Flinders River at Glendower, based on field data obtained by the Queensland Water Resources Commission in 1982/83.     

Variability and transport of suspended sediment,particulate and dissolved organic carbon in the tidal freshwater Hudson River

Measurements of suspended matter, particulate organic carbon and dissolved organic carbon were made over a three year period at stations spanning 150 km of the tidal freshwater Hudson River. Suspended matter concentrations varied from year-to-year and were not related to freshwater discharge. The increase in suspended matter with depth in vertical profiles suggests that, during medium to low flow conditions, resuspension of bottom sediments was as important a source of sediment as loadings from tributaries. Particulate organic carbon showed significant variability among stations, and both autochthonous primary production and detrital organic matter are contributing to POC standing stocks. Dissolved organic carbon represented over half of the total organic carbon in the water column and showed little variation among stations.Examining downstream changes in transport showed that there was significant production of both suspended matter and POC within the study reach during the ice-free season. Tributary loadings within the study reach do not appear to be the cause of these increases in downstream transport. Dissolved organic carbon behaved conservatively in that there was no evidence for net production or net consumption within the river.The spatial/temporal patterns and analyses of transport suggest that suspended matter and POC, but not DOC, were controlled to a significant extent by processes occurring within the river and were not simply related to loadings from outside.     

Effects of gravel size and peat material concentrations on embryo survival and alevin emergence of brown trout,Salmo trutta L.

Embryo survival and alevin emergence pattern of brown trout were studied in simulated redds with different homogeneous gravel sizes and different concentrations of peat material. Optimal survival (95%) occurred in 18 mm gravel and survival decreased with decreasing gravel size. High concentrations (40%) of peat material resulted in low survival (65%). The proportion of premature emerging alevins increased in finer gravels and at high peat concentrations. Premature alevins had a large yolk sac and are probably very vulnerable to predators.     

Formation of the ventral hooks on the sperm head of the plains mouse,Pseudomys australis

The sperm head of the plains mouse, Pseudomys australis, has three curved hooks projecting from its anterior margin. The two ventral hooks have previously been shown to consist largely of an extension of the subacrosomal material. To characterize further the structure and composition of the ventral hooks, we have examined their formation during spermiogenesis using transmission electron microscopy, silver staining, and actin localization with NBD-phallacidin. The ventral hooks develop as an extension of the perinuclear space and postacrosomal dense lamina on the anteroventral margin of the sperm head. Bundles of 6-nm-thick filaments appear in the core of each hook; these are probably actin filaments based on staining of the hooks with NBD-phallacidin. Just prior to spermiation, electron-dense material condenses in the core of the ventral hooks and concurrently in the perinuclear space in the remainder of the sperm head. The two ventral hooks thus appear to consist of a core of perinuclear material and actin filaments, which is enclosed by a continuation of the postacrosomal dense lamina.     

Neurosecretion in the external and internal zone of the median eminence of the cat and dog

Summary The immunoglobulin-enzyme bridge technique, in association with rabbit antiporcine neurophysin-II has been applied to the median eminence of the dog and cat in order to study the distribution of neurophysin-like antigens throughout this area of the brain and correlate the findings with the corresponding distribution of neurosecretory material (NSM) as revealed by the crotonaldehyde fuchsin stain.Neurophysin and NSM were both present in the hypothalamo-supraoptico-neurohypophysial system—the pathway taken by oxytocin, vasopressin and neurophysin from the hypothalamus to the posterior pituitary lobe.Whereas the tuberoinfundibular tract of the median eminence was almost devoid of NSM, the presence of neurophysin-like material was clearly evident using immunoperoxidase histochemistry. The significance of a protein in the external median eminence possessing determinants cross-reactive against anti-neurophysin serum is discussed.This work was financed by a grant from the Medical Research Council of New Zealand.