Determination of the inorganic degradation products sulfate and sulfamate in the antiepileptic drug topiramate by capillary electrophoresis

A capillary electrophoresis (CE) method has been developed as an alternative method for the determination of the inorganic degradation products sulfate and sulfamate in topiramate drug product and drug substance, currently performed by ion chromatography. The anions are separated in a background electrolyte containing potassium chromate and boric acid, followed by indirect UV detection. By adding tetradecyltrimethylammonium bromide to the electrolyte, analysis is performed under co-electroosmotic flow conditions. Variations in injection volumes and migration times are compensated for by use of an internal standard. The validation of the method, which was performed according to ICH guidelines (International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use) [1], comprises specificity, accuracy, linearity, precision, sensitivity and robustness. In addition, the results of an actual tablet sample analysis obtained by this CE method are statistically shown to be in close agreement with those obtained by an ion chromatographic method.     

Simplified procedure for measurement of serum dehydroepiandrosterone and its sulfate with gas chromatography–ion trap mass spectrometry and selected reaction monitoring

Dehydroepiandrosterone (DHEA) and dehydroepiandrosterone sulfate (DHEAS) are endogenous steroids that have recently been widely publicized as potential treatments for many disorders. This paper describes a gas chromatographic–ion trap mass spectrophotometric assay with selected reaction monitoring for measurement of DHEA and DHEAS levels. The hormones and internal standard (5-androsten-3β-ol-16-one methyl ester) are extracted from serum with Oasis solid-phase extraction tubes. The extracted steroids are dissolved in methanol and injected into a Finnigan GCQ ion trap mass spectrometer. In the selected reaction mode, both DHEA and DHEAS can be identified and quantified in a single injection. No derivatization or expensive deuterated internal standards are required.     

Energetics of syntrophic ethanol oxidation in defined chemostat cocultures

The ethanol-oxidizing, proton-reducing Pelobacter acetylenicus was grown in chemostat cocultures with either Acetobacterium woodii, Methanobacterium bryantii, or Desulfovibrio desulfuricans. Stable steady state conditions with tightly coupled growth were reached at various dilution rates between 0.02 and 0.14 h^-1. Both ethanol and H₂ steady state concentrations increased with growth rate and were lower in cocultures with the sulfate reducer < methanogen < homoacetogen. Due to the higher affinity for H₂, D. desulfuricans outcompeted M. bryantii, and this one A. woodii when inoculated in cocultures with P. acetylenicus. Cocultures with A. woodii had lower H₂ steady state concentrations when bicarbonate reduction was replaced by the energetically more favourable caffeate reduction. Similarly, cocultures with D. desulfuricans had lower H₂ concentrations with nitrate than with sulfate as electron acceptor. The Gibbs free energy (G) available to the H₂-producing P. acetylenicus was independent of growth rate and the H₂-utilizing partner, whereas the G available to the latter increased with growth rate and the energy yielding potential of the H₂ oxidation reaction. The critical Gibbs free energy (G_c), i.e. the minimum energy required for H₂ production and H₂ oxidation, was-5.5 to-8.0 kJ mol^-1 H₂ for P. acetylenicus,-5.1 to-6.3 kJ mol^-1 H₂ for A. woodii,-7.5 to-9.1 kJ mol^-1 H₂ for M. bryantii, and-10.3 to-12.3 kJ mol^-1 H₂ for D. desulfuricans. Obviously, the potentially available energy was used more efficiently by homoacetogens > methanogens > sulfate reducers.     

Protonmotive force in freshwater sulfate-reducing bacteria,and its role in sulfate accumulation in Desulfobulbus propionicus

The protonmotive force in several sulfate-reducing bacteria has been determined by means of radiolabelled membrane-permeant probes (tetraphenyl-phosphonium cation, TPP⁺, for , and benzoate for pH). In six of ten freshwater strains tested only the pH gradient could be determine, while the membrane potential was not accessible due to nonspecific binding of TPP⁺. The protonmotive force of the other four strains was between –110 and –155 mV, composed of a membrane potential of –80 to –140 mV and a pH gradient between 0.25 and 0.8 (inside alkaline) at pH_out=7. In Desulfobulbus propionicus the pH gradient decreased with rising external pH values. This decrease, however, was compensated by an increasing membrane potential. Sulfate, which can be highly accumulated by the cells, did not affect the protonmotive force, if added in concentrations of up to 4 mM. The highest sulfate accumulation observed (2500-fold), which occurred at external sulfate concentrations below 5 M, could be explained by a symport of three protons per sulfate, if equilibrium with the protonmotive force was assumed. At higher sulfate concentrations the accumulation decreased and suggested an electroneutral symport of two protons per sulfate. At sulfate concentrations above 500 M, the cells stopped sulfate uptake before reaching an equilibrium with the protonmotive force.Abbreviations CCCP carbonyl cyanide m-chlorophenylhydrazone - MOPS morpholinopropanesulfonic acid - TPP⁺ tetraphenylphosphonium cation - EDTA ethylenediaminetetraacetic acid - pH transmembrane pH gradient (pH_in-pH_out) - transmembrane electrical potential difference     

Electron transport across the plasmalemma of Lemna gibba G1

Lemna gibba L., grown in the presence or absence of Fe, reduced extracellular ferricyanide with a V _max of 3.09 mol · g^-1 fresh weight · h^-1 and a K _m of 115 M. However, Fe³⁺-ethylenediaminetetraacetic acid (EDTA) was reduced only after Fe-starvation. External electron acceptors such as ferricyanide, Fe³⁺-EDTA, 2,6-dichlorophenol indophenol or methylene blue induced a membrane depolarization of up to 100 mV, but electron donors such as ferrocyanide or NADH had no effect. Light or glucose enhanced ferricyanide reduction while the concomitant membrane depolarization was much smaller. Under anaerobic conditions, ferricyanide had no effect on electrical membrane potential difference (E_m). Ferricyanide reduction induced H⁺ and K⁺ release in a ratio of 1.16 H⁺+1 K⁺/2 e^- (in +Fe plants) and 1.28 H⁺+0.8 K⁺/2 e^- (in -Fe plants). Anion uptake was inhibited by ferricyanide reduction. It is concluded that the steady-state transfer of electrons and protons proceeds by separate mechanisms, by a redox system and by a H⁺-ATPase.Abbreviations E _m electrical membrane potential difference - EDTA ethylenediaminetetraacetic acid - DCPIP dichlorophenol indophenol - +Fe control plant - -Fe iron-deficient plant - FW fresh weight - H⁺ electrochemical proton gradient     

Studies on dissimilatory sulfate-reducing bacteria that decompose fatty acids

Gliding motility, ultrastructure and nutrition of two newly isolated filamentous sulfate-reducing bacteria, strains 5ac10 and 4be13, were investigated. The filaments were always attached to surfaces. Growth was supported by addition of insoluble aluminium phosphate or agar as substrata for gliding movement. Electron microscopy of ultrathin sections revealed cell walls characteristic of Gramnegative bacteria; the undulated structure of the outer membrane may pertain to the translocation mechanism. Intracytoplasmic membranes were present. Acetate, higher fatty acids, succinate or fumarate served as electron donors and carbon sources. Strain 5ac10 grew also with lactate, but not with benzoate that was used only by strain 4be13. Strain 5ac10 was able to grow slowly on H₂ plus CO₂ or formate in the presence of sulfate without additional organic carbon source. The capacity of complete oxidation was shown by stoichiometric measurements with acetate plus sulfate. Both strains contained b- and c-type cytochromes. Desulfoviridin was detected only in strain 5ac10. The two filamentous gliding sulfate reducers are described as new species of a new genus, Desulfonema limicola and Desulfonema magnum.     

The effect of sulfate reduction on the thermophilic (55°C) methane fermentation process

Summary The continuously operated suspended growth anaerobic contact system was utilized to estimate the effect of sulfate reduction on the thermophilic (55°C) methane fermentation process. Results indicated that reduction in methanogenesis in the presence of sulfate was due to two separate, but related, processes;i.e. competitive and sulfide inhibition. Although prevention of competitive inhibition would be difficult under normal fermenter operation, sulfide inhibition could be minimized by environmental selection of sulfide tolerant microbial populations through biomass recycle and pH control. Stable fermenter operation was achieved at soluble sulfide concentrations as high as 330 mg/l soluble sulfide. Using batch fermenters, a maximum thermophilic sulfate reduction rate of 3.7 mg SO₄ ^2––S/g volatile solids (VS)-day was estimated. The importance of reporting sulfate reduction rates on a biomass basis is demonstrated by a simple population adjustment kinetic model.This research study was conducted at the Department of Agricultural Engineering, Cornell University, Riley Robb Hall, Ithaca, NY 14853, U.S.A.     

Characterization of the requirements and substrates for reductive dehalogenation by strain DCB-1

Summary An obligately anaerobic bacterium known as strain DCB-1 was grown under a variety of conditions to determine the requirements for dehalogenation as well as factors which stimulated or inhibited the process. Dechlorination was obligately anaerobic since introduction of O₂ immediately inhibited the reaction. Sulfuroxy anions, which also serve as electron acceptors for DCB-1, inhibited dechlorination but NO₃ ^– and fumarate did not. The optimum growth medium for dechlorination was 0.2% Na pyruvate and 20% rumen fluid in basal salts. Media with either pyruvate or rumen fluid alone did not support dechlorination. DCB-1 also consumed H₂ but typical substrate concentrations of H₂ (80 kPa) delayed dechlorination. Once the H₂ concentration was reduced to <20 M (2.67 kPa), dechlorination resumed. Dehalogenation by DCB-1 was restricted to the meta substituted benzoates as halogens in other positions and chloroaromatic compounds with other functional groups were not dechlorinated.     

Fate of elemental sulfur in an intertidal sediment

Abstract: Sediment from a tidal flat at Wedderwarden, near the mouth of the Weser estuary, northern Germany, was amended with elemental sulfur, and concentrations of metabolic end products were monitored. The production of both sulfate and sulfide was consistent with disproportionation as the most important fate of the added elemental sulfur. A population of bacteria conducting active elemental sulfur disproportionation was also enriched from the sediment. In the enrichments, containing both elemental sulfur and Fe oxides as a sulfide 'scrub', sulfide and sulfate were produced in a ratio of     , somewhat lower than the predicted ratio of     . The mismatch between predicted and observed production ratios is explained by the channelling of electrons into autotrophic or mixotrophic CO₂ fixation rather than sulfide formation. The production of organic carbon, in the correct amount to explain the observed sulfide to sulfate production ratio, was verified by organic carbon analysis. Finally, rates of sulfate reduction were identical in the elemental sulfur amended sediment, and in control sediment with no added sulfur. Hence, the heterotrophic bacterial community was completely unaffected by an active metabolism conducting elemental sulfur disproportionation.