An Extreme Value Analysis of Pollutant Concentrations in Surface Soils Due to Atmospheric Deposition

Risk assessments often rely on deterministic models using long-term averages or “steady-state” values of input variables. Such models do not provide the information needed to estimate acute exposures. This study uses extreme value theory to examine the frequency and magnitude of daily pollutant concentrations in surface soils predicted at six U.S. locations. Concentrations are predicted using a deposition-leaching model and 50 years of historical precipitation data. A stochastic model also is used to generate 1000 years of precipitation data as modeling inputs for each location. The annual maximum concentrations at each site are fitted to a Gumbel type I distribution to estimate occurrence probability. For soluble pollutants, the predicted concentration varied substantially with precipitation, and the maximum daily concentrations exceeded annual averages by 4 to 8 times. Observed and synthetic precipitation data produced similar results at most study locations, though the synthetic data provided a slightly better fit to the Gumbel type I distribution. The precipitation model allows the generation of representative precipitation data that extend limited historical records. The extreme value analysis facilitates the evaluation of maximum pollutant concentrations, return periods, and other statistics that are important in evaluating acute exposures.     

Effects of detergents on catalytic activity of human endometase/matrilysin 2, a putative cancer biomarker

Matrix metalloproteinases (MMPs) are a family of hydrolytic enzymes that play significant roles in development, morphogenesis, inflammation, and cancer invasion. Endometase (matrilysin 2 or MMP-26) is a putative early biomarker for human carcinomas. The effects of the ionic and nonionic detergents on catalytic activity of endometase were investigated. The hydrolytic activity of endometase was detergent concentration dependent, exhibiting a bell-shaped curve with its maximum activity near the critical micelle concentration (CMC) of nonionic detergents tested. The effect of Brij-35 on human gelatinase B (MMP-9), matrilysin (MMP-7), and membrane-type 1 MMP (MT1-MMP) was further explored. Their maximum catalysis was observed near the CMC of Brij-35 (∼ 90 μM). Their IC₅₀ values were above the CMC. The inhibition mechanism of MMP-7, MMP-9, and MT1-MMP by Brij-35 was a mixed type as determined by Dixon’s plot; however, the inhibition mechanism of endometase was noncompetitive with a K_i value of 240 μM. The catalytic activities of MMPs are influenced by detergents. Monomer of detergents may activate and stabilize MMPs to enhance catalysis, but micelle of detergents may sequester enzyme and block the substrate binding site to impede catalysis. Under physiological conditions, a lipid or membrane microenvironment may regulate enzymatic activity.     

Environmental and genetic control of crassulacean acid metabolism in two crassulacean species and an F1 hybrid with differing biomass δ13C values

Abstract The growth, biomass δ¹³C values, and ability to accumulate titratable acidity at night were compared in eight environmental treatments for Cremnophila linguifolia, Sedum greggii, and their F₁ hybrid. In the phytotron, differences in treatment daylength, day/night temperature and water availability were all found to have effects on total plant dry weight, nocturnal accumulation of titratable acidity and biomass δ¹³C value of at least some of the genotypes. However, there were differences between the genotypes both in the magnitude and direction of response of the phenotypic properties to the treatment variables. The phytotron δ¹³C values ranged from -12.9 to -19.2‰ for C. linguifolia, from -22.2 to -33.4‰ for S. greggii, and from -19.2 to -24.9‰ for the hybrid. After with-holding water for 76 h both C. linguifolia and the hybrid had midday Ψ_leaf values of -0.23 MPa; however, S. greggii had a value of -1.05 MPa. In contrast to past observations of other species, the daily watered plants of C. linguifolia had less negative δ¹³C values than did the plants watered only weekly.     

Soil and plant tests for available sulfur in wetland rice soils

Summary Soil tests, plant performance, and plant tissue analyses were used to study the availability of sulfur to wetland rice in 30 Philippine soils. The critical concentrations of available sulfur by the calcium phosphate, lithium chloride, ammonium acetate, and hydrochloric acid extractions were 9, 25, 30, and 5 mg/kg, respectively. The critical total sulfur limits were 0.11% in the shoot at maximum tillering 0.055% in the straw at maturity, and 0.065% in the grain. The critical N:S ratio was 15 in the shoot at maximum tillering, 14 in the straw at maturity, and 26 in the grain. The critical sulfate-sulfur limit was 150 mg/kg in the shoot at maximum tillering and 100 mg/kg in the straw at maturity. The critical sulfate-sulfur/total sulfur percentage ratio was 15% in the shoot at maximum tillering and the straw at maturity. Plant performance, judged by appearance and yield of dry matter, straw, and grain, was generally poorer in the sulfur deficient soils than in the other soils. Although the calcium phosphate and ammonium acetate methods gave a better correlation between plant performance and available sulfur than the others, all four methods separated sulfur-deficient soils from non-deficient ones. The hydrochloric acid method merits further study because it is simple and versatile.     

How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.     

Assessment of Optimal Selected Prognostic Factors

The identification and assessment of prognostic factors is one of the major tasks in clinical research. The assessment of one single prognostic factor can be done by recently established methods for using optimal cutpoints. Here, we suggest a method to consider an optimal selected prognostic factor from a set of prognostic factors of interest. This can be viewed as a variable selection method and is the underlying decision problem at each node of various tree building algorithms. We propose to use maximally selected statistics where the selection is defined over the set of prognostic factors and over all cutpoints in each prognostic factor. We demonstrate that it is feasible to compute the approximate null distribution. We illustrate the new variable selection test with data of the German Breast Cancer Study Group and of a small study on patients with diffuse large B‐cell lymphoma. Using the null distribution for a p‐value adjusted regression trees algorithm, we adjust for the number of variables analysed at each node as well. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Estimation of Tissue Construction Cost from Heat of Combustion and Organic Nitrogen Content

Abstract. We present a method for estimating the construction costs of plant tissues from measurements of heat of combustion, ash content, and organic nitrogen content. The method predicts glucose equivalents, the amount of glucose required to provide carbon skeletons and reductant to synthesize a quantity of organic product. Glucose equivalents have previously been calculated from the elemental composition of tissue. We define construction cost as the amount of glucose required to provide carbon skeletons, reductant and ATP for synthesizing the organic compounds in a tissue via standard biochemical pathways. The fraction of the total construction cost of a compound or tissue (excluding costs of transporting compounds) that is reflected in its glucose equivalents is the biosynthetic efficiency ( E _B). This quantity varies between 0.84 and 0.95 for tissues with a wide range of compositions. Using the new method, total construction cost can be estimated to ± 6% of the value obtained from biochemical pathway analysis.
Construction costs of leaves of three chaparral species were estimated using the proposed method and compared to previously published values, derived using different methods. Agreement among methods was generally good. Differences were probably due to a combination of inaccuracy in the estimated biosynthetic efficiency and technical difficulties with biochemical analysis, one of the older methods of determining construction cost.     

Luxury consumption and specific utilization rates of three macroelements in two Taraxacum microspecies of contrasting mineral ecology

Plants of Taraxacum sellandii Dahlst., a microspecies adapted to fertile, and Taraxacum nordstedtii Dahlst., adapted to infertile soils, were cultured hydroponically, either on a complete nutrient solution or on one deprived of nitrogen, phosphorus, or potassium ions. For all four treatments, the growth and internal mineral concentration of the plants was monitored. For plants cultured on a complete nutrient solution, the uptake rates of nitrate, phosphate, and potassium ions were determined. Luxury consumption of the three macronutrients was computed as the excess of ion absorption over the ion uptake rates minimally required to sustain maximum growth. In these calculations the critical N, P, or K⁺ concentrations, earlier derived, were used as parameters describing the mineral status minimally required to allow maximum growth. Efficiency in use of the three macroelements at various levels of mineral accumulation was also computed. Finally, the response to phosphate starvation as related to phosphate uptake capacity and the accumulation of P was investigated.
The physiological properies investigated provide a causal background for the superior adaptation of T. nordstedtii as compared to T. sellandii to infertile sites. Taraxacum nordstedtii had a higher relative luxury consumption of NO₃^–, H₂PO^-₄, and K⁺, a higher efficiency in N and P use at N– and (severe) P-deficiency, respectively; and, after phosphate starvation, a relatively high preservation of phosphate uptake capacity and an enlargement of P storage. In combination with the low potential growth, luxury consumption will be particularly effective in T. nordstedtii in preventing or minimizing mineral deficiency. The distribution of minerals between cytoplasm and vacuoles as a factor in mineral use efficiency is discussed.     

Photoperiodic induction of the first and the second diapause in the bean bug,Riptortus clavatus: a photoperiodic history effect

Summary In nondiapause adults raised under a long-day photoperiod, the critical daylength for diapause induction was between 13 and 14 h although some individuals did not respond to the short-day photoperiod and went on laying eggs. In postdiapause adults in which LD 1311 induced the first diapause (L13 insects), the critical daylength for diapause reinduction was between 13 and 14 h, whereas it was between 12 and 13 h in postdiapause adults in which LD 1014 induced the first diapause (L10 insects). Under LD 1311, a small proportion of L10 insects went into the second diapause after great delay as compared with L13 insects. Under LD 1014, on the other hand, L10 insects went into the second diapause more rapidly than L13 insects. Therefore, the photoperiod which had induced the first diapause affected the photoperiodic induction of the second diapause not only in the critical daylength but also in the speed of response. In Riptortus clavatus, the photoperiodic history influences the subsequent photoperiodic response even after a physiological state induced by the previous photoperiod was terminated completely.Abbreviations L13 insects postdiapause adults in which LD 1311 induced the first diapause - L10 insects postdiapause adults in which LD 1014 induced the first diapause