Mode of action of a surfactant–polymer formulation to support performance of the entomopathogenic nematode Steinernema carpocapsae for control of diamondback moth larvae (Plutella xylostella)

The use of entomopathogenic nematodes on cabbage leaves against larvae of the diamondback moth (DBM) Plutella xylostella requires the addition of formulation adjuvants to achieve satisfying control. Without adjuvants nematodes settle in the tank mix of backpack sprayers causing uneven distribution. The polymers arabic and guar gum, alginate and xanthan were used in concentrations between 0.05 and 0.3% to retard sedimentation of Steinernema carpocapsae. Arabic gum had no effect, guar gum prevented sedimentation at 0.3% but the effect dropped significantly at lower concentration. At 0.05%, xanthan prevented nematode sedimentation better than alginate. Deposition of nematodes on the leaves was significantly increased by the addition of any of the polymers. Spraying nematodes on leaves with an inclination of 45° without the addition of any formulation resulted in 70% run-off. Adding 0.2% alginate or xanthan reduced the losses to <20%. The use of a surfactant–polymer formulation significantly reduced defoliation by DBM larvae. Visual examinations provided evidence that nematodes are not ingested by DBM larvae. Invasion of S. carpocapsae is an active process via the anus. The function of the formulation is not to prolong nematode survival, but to provide environmental conditions which enable rapid invasion of the nematodes. Nematode performance was improved by selection of the best surfactant in combination with xanthan and by optimisation of the concentrations of the surfactant Rimulgan® and the polymer xanthan. The best control results were achieved with Rimulgan® at 0.3% together with 0.3% xanthan, causing DBM mortality of >90% at 80% relative humidity and >70% at 60%. The formulation lowered the LC₅₀ from 12 to 1 nematode/larva. The viscosity of the surfactant–polymer formulations correlated well with nematode efficacy, prevention of sedimentation and adherence to the leave. This physical parameter can therefore be recommended for improvement of nematode formulations to be used for foliar application against DBM.     

Active compounds in Populus nigra L. wilted leaves responsible for attracting Helicoverpa armigera (Hübner) (Lep., Noctuidae) and new agaropectin formulation

Abstract:  The leaf extracts of Populus nigra were collected and identified by steam distillation, air entrainment and gas chromatographic–mass spectrometric analysis. Electroantennograms were recorded from Helicoverpa armigera adults in response to the chemicals identified. Both aromatic compounds and green-leaf volatiles elicited strong responses. Field experiments revealed that the active compounds responsible for attracting H. armigera moths are mainly short-side-chain aromatic alcohols and aldehydes. We, for the first time, used agaropectin as the controlled-release matrix of insect attractants. A five-component lure containing all the aromatics without phenolics, mixed in the proportions as found in the steam distillate of the leaves collected in August, produced the best trap catch. The results showed that the volatiles of wilted leaves of P. nigra can attract H. armigera adults by feeding attraction.     

Twin-screw extrusion of ‘Pesta’-encapsulated biocontrol agents

World Journal of Microbiology and Biotechnology -     

Chemical control of vine weevil larvae on container-grown hardy ornamental nursery stock 1986–1989

In a search for alternatives to the former standard aldrin compost incorporation treatment for control of vine weevil (Otiorhynchus sulcatus) larvae on container-grown hardy ornamental nursery stock, a series of 87 tests of insecticides were done at four experimental centres of the ADAS (Leeds, Reading, Wolverhampton and Wye) from 1986 to 1989. Insecticidally-treated plants and untreated controls were artificially infested with vine weevil eggs at varying intervals before and after treatment, and the survival of the pest was assessed. Aldrin treatment gave consistent and excellent preventive control of vine weevil larvae for over 2 years. Of the candidate materials tested, a slow-release granular formulation of chlorpyrifos incorporated into compost at a dose rate of 100 g a.i. m^-3 of compost gave good control for up to 34 wk after treatment (the longest period evaluated) and a micro-encapsulated slow release formulation of fonofos incorporated at a dose rate of 43.3 g a.i. m^-3 usually gave good control for up to two years (the longest period evaluated). Surface applications of these two organophosphates or of carbofuran granules, though sometimes effective, were unreliable as either preventive or remedial treatments even for short term control.     

FIBS-enabled Noninvasive Metabolic Profiling

In the era of computational biology, new high throughput experimental systems are necessary in order to populate and refine models so that they can be validated for predictive purposes. Ideally such systems would be low volume, which precludes sampling and destructive analyses when time course data are to be obtained. What is needed is an in situ monitoring tool which can report the necessary information in real-time and noninvasively. An interesting option is the use of fluorescent, protein-based in vivo biological sensors as reporters of intracellular concentrations. One particular class of in vivo biosensors that has found applications in metabolite quantification is based on Förster Resonance Energy Transfer (FRET) between two fluorescent proteins connected by a ligand binding domain. FRET integrated biological sensors (FIBS) are constitutively produced within the cell line, they have fast response times and their spectral characteristics change based on the concentration of metabolite within the cell. In this paper, the method for constructing Chinese hamster ovary (CHO) cell lines that constitutively express a FIBS for glucose and glutamine and calibrating the FIBS in vivo in batch cell culture in order to enable future quantification of intracellular metabolite concentration is described. Data from fed-batch CHO cell cultures demonstrates that the FIBS was able in each case to detect the resulting change in the intracellular concentration. Using the fluorescent signal from the FIBS and the previously constructed calibration curve, the intracellular concentration was accurately determined as confirmed by an independent enzymatic assay.     

含生物型增效剂棉铃虫病毒悬浮剂的应用效果研究

本文报道含生物型增效剂棉铃虫核多角体病毒(Helicoverpa armigera nucleopolyhedrovirus,HaNPV)悬浮剂对害虫的防治效果及其对天敌数量的影响。作者筛选灭幼脲类似物作为棉铃虫核多角体病毒的生物型增效剂,HaNPV 4．2ppm氟啶脲(chlorfluazuron)感染3龄初棉铃虫幼虫,感染幼虫的半致死时间(LT50)为2．24d,比单用HaNPV感染幼虫的LT50缩短2．66d。含生物型增效剂的棉铃虫核多角体病毒悬浮剂在田间应用,施药后5d,对2代和4代棉铃虫的防治效果分别为81．4％-85．2％和70．7％-82．6％,施药后7d,对2代和4代的防治效果分别为85．2％-86．3％和69．6％-82．9％。棉铃虫病毒悬浮剂中的生物型增效剂对天敌数量仅有轻微影响。含生物型增效剂棉铃虫核多角体病毒悬浮剂不仅能有效控制害虫,而且对天敌有很好的保护作用。     

Theoretical analysis of excipient concentrations during the final ultrafiltration/diafiltration step of therapeutic antibody

Diafiltration of a protein solution into a new buffer is a common final step in biopharmaceutical manufacturing. However, the excipient concentrations in the retentate are not always equal to their corresponding concentrations in the new buffer (diafiltration buffer). This phenomenon was observed repeatedly during diafiltration of different therapeutic monoclonal antibodies in which the concentrations of histidine and either sorbitol or sucrose (depending on which was chosen for the diafiltration buffer) in the retentate were lower than in the diafiltration buffer. Experimental studies and theoretical analyses of the ultrafiltration/diafiltration (UF/DF) step were carried out to determine the primary causes of the phenomenon and to develop a mathematical model capable of predicting retentate excipient concentrations. The analyses showed that retentate histidine concentration was low primarily because of repulsive charge interactions between positively‐charged histidine molecules and positively‐charged protein molecules, and that volume exclusion effects were secondary for like‐charged molecules. The positively‐charged protein molecules generate an electrical potential that cause an uneven distribution of charged histidine molecules. This interaction was used to construct a mathematical model based on the Poisson‐Boltzmann equation. The model successfully predicted the final histidine concentration in the diafiltered product (retentate) from the UF/DF development and production runs, with good agreement across a wide range of protein and histidine concentrations for four therapeutic monoclonal antibodies. The concentrations of uncharged excipients (sorbitol or sucrose) were also successfully predicted using previously established models, with volume exclusion identified as the primary cause of differences in uncharged excipient concentrations in the retentate and diafiltration buffer. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Updated Lagrangian finite element formulations of various biological soft tissue non-linear material models: a comprehensive procedure and review

Simplified material models are commonly used in computational simulation of biological soft tissue as an approximation of the complicated material response and to minimize computational resources. However, the simulation of complex loadings, such as long-duration tissue swelling, necessitates complex models that are not easy to formulate. This paper strives to offer the updated Lagrangian formulation comprehensive procedure of various non-linear material models for the application of finite element analysis of biological soft tissues including a definition of the Cauchy stress and the spatial tangential stiffness. The relationships between water content, osmotic pressure, ionic concentration and the pore pressure stress of the tissue are discussed with the merits of these models and their applications.     

Effects of chemical and botanical insecticides used for locust control on Metarhizium anisopliae var. acridum conidia after short- to medium-term storage at 30°C

The short- to medium-term viability and growth of Metarhizium anisopliae var. acridum conidia were investigated when combined with six insecticides, at three different concentrations. All of the insecticides used in this study were suitable for immediate spraying with M. anisopliae var. acridum conidia except for fenitrothion. Fipronil, teflubenzuron, and fenitrothion formulations significantly reduced conidial viability over time. The 10% teflubenzuron treatment caused loss of viability relatively quickly with 9.9% germination after 28 days. Mycelial growth was affected by all the treatments except fenitrothion.