Levels of genetic diversity at different stages of the domestication cycle of interior spruce in British Columbia

Concerns over the reductionist nature of the domestication of forest-tree species focus on the possibility of potential genetic erosion during this process. To address these concerns, genetic diversity assessments in a breeding zone the Province of British Columbia “interior” spruce (Picea glauca×engelmanni) program was conducted using allozyme markers. Genetic-variation comparisons were made between natural and production (seed orchard) populations as well as seed and seedling crops produced from the same breeding zone’s seed orchard. The natural population sample consisted of a total of 360 trees representing three stands within each of three watersheds present in the Shuswap-Adams low-elevation zone of interior British Columbia. Small amounts of genetic differentiation were observed among the nine natural populations (4%) and this was attributable to extensive gene flow Consequently, the sum of these nine populations was considered as a baseline for the genetic variation present in the breeding zone. The comparisons between the seed orchard and the breeding zone produced a similar percentage of polymorphic loci while the expected hetrozygosity (0.207 vs 0.210) and the average number of alleles per locus (2.7 vs 2.4) were slightly lower in the seed orchard. A total of seven natural populations’ rare alleles were not present in the orchard population, while one allele was unique to the orchard. The %P increased to 70.6% in the seedlot, but dropped to the natural populations level (64.7%) in the plantation. The observed increase in %P was a result of pollen contamination in the orchard. It is suspected that the reduction in the plantation was caused by an unintentional selection in the nursery. Simulated roguing in the orchard did not drastically reduce even if up to 50% of the orchard’s clones were rogued. However, roguing was associated with a reduction in the average number of alleles per locus (i.e., sampling effect). Received: 2 January 1996 / Accepted: 24 May 1996     

The occurrence and frequency of 2n pollen in 2x, 4x,and 6x wild,tuber-bearing Solanum species from Mexico,and Central and South America

Summary The occurrence of 2n pollen-producing plants was investigated in 187 plant introductions (PIs) of 38 wild species of tuber-bearing Solanum. These 2x, 4x, and 6x species are from Mexico, and Central and South America. The determination of 2n pollen-producing plants was conducted using acetocarmine glycerol. Plants with more than 1% large-size pollen were regarded as 2n pollen-producing plants. 2n pollen-producing plants were identified in the following species: 10 out of 12 Mexican 2x species, seven of nine South American 2x species, seven of seven Mexican and Central American 4x species, five of five South American 4x species, and five of five Mexican 6x species. The frequency of 2n pollen-producing plants varied among species at the same ploidy level, but the range of frequency, generally between 2 and 10% among species, was similar over different ploidy levels. The general occurrence of 2n pollen in both 2x and polyploid species, which are evolutionarily related, is evidence that the mode of polyploidization in tuber-bearing Solanums is sexual polyploidization. Furthermore, the frequencies of 2n pollen-producing plants in autogamous disomic polyploid species were not markably different from those of their related diploid species. It is thought that the frequent occurrence of 2n gametes with autogamy tends to disturb the fertility and consequently reduce fitness of polyploids. Thus, we propose that the breeding behavior of polyploids and the occurrence of 2n gametes may be genetically balanced in order to conserve high fitness in polyploid species in tuberbearing Solanum.Paper No. 3114 from the Laboratory of Genetics. Research supported by the College of Agriculture and Life Sciences; International Potato Center; USDA, SEA, CGRO 84-CRCR-1-1389; and Frito Lay, Inc.     

Portrait of the Patient as a Young Man: An Exploration of the Use of Photographs in Hospital

The display of personal photographs in hospital is a common practice that has yet to be rigorously examined. The photographs displayed are subject to interpretation by the viewer and may lead to misunderstandings or miscommunication if clarification of meaning is not sought. This paper explores a range of possible meanings that the display of photographs in hospital may hold, based on a case study of a 15 year old boy hospitalised with a life threatening illness. Further research is needed into the actual meanings attributed to the display of photographs in hospital by patients and family members.     

Effects of local density and flower colour polymorphism on pollination and reproduction in the rewardless orchid Dactylorhiza sambucina (L.) Soò

The rewardless orchid Dactylorhiza sambucina shows a stable flower colour polymorphism, with both yellow- and red-flowered morphs growing sympatrically. Pollination biology and breeding system were investigated to examine the effects of density of plants, colour polymorphism, inflorescence dimension, and flower position within inflorescence on male and female reproductive success in three natural populations of D. sambucina. There were significant differences among sites in the number of pollinia removed and in fruit set per inflorescence. Number of removed pollinia and capsule production in D. sambucina were independent from flower and inflorescence size or flower position. As a whole, the red morphs showed the highest number of capsules produced, while the yellow morphs had the greatest male success. The relative male and female reproductive success were independent from plant density but were significantly correlated with the yellow morph frequency at the population level. Overall, our findings show that the contribution to the total reproductive success deriving from the two colour morphs does not conform with the predictions of negative frequency-dependent selection.     

实验小鼠种群管理（英文）

2009年11月份在西安举行由中国实验动物学会发起的实验动物医药技术培训研讨会上,本人做了关于实验小鼠种群管理的演讲。其主题涵盖了小鼠繁殖性能的维护和基因工程种群的管理。本篇文章的目的在于强调其所涵盖的材料并为进一步研究提供参考。如若对本文所讨论的内容希望有更深刻的理解,这篇文章所引用的参考资料值得进一步的阅读。另外本文未涉及远交系小鼠的繁殖培育和基因管理,但如有需要可以联系本文作者,可推荐需阅读的材料清单。     

Optimization of pancreatic lipase inhibition by Cudrania tricuspidata fruits using response surface methodology

The fruits of Cudrania tricuspidata (Carr.) Bur. (Moraceae) significantly inhibited pancreatic lipase, which plays a key role in fat absorption. Optimization of extraction conditions with minimum pancreatic lipase activity and maximum yield was determined using response surface methodology with three-level-three-factor Box–Behnken design (BBD). Regression analysis showed a good fit of the experimental data and the optimal condition was obtained as ethanol concentration, 74.5%; temperature 61.9 °C and extraction time, 13.5 h. The pancreatic lipase activity and extraction yield under optimal conditions were found to be 65.5% and 54.0%, respectively, which were well matched with the predicted value of 65.8% and 47.1%. Further fractionation of C. tricuspidata extract resulted in the isolation of compound 1, which was identified as 5,7,4′-trihydroxy-6,8-diprenylisoflavone. It inhibited pancreatic lipase activity with IC₅₀ value of 65.0 μM. HPLC analysis suggested positive correlation between pancreatic lipase inhibition and 5,7,4′-trihydroxy-6,8-diprenylisoflavone of C. tricuspidata fruits.     

EMAP-Wetlands: A sampling design with global application

The U.S. Environmental Protection Agency (EPA) initiated the Environmental Monitoring and Assessment Program (EMAP) in 1988. The wetland component (EMAP-Wetlands) is designed to provide quantitative assessments of the current status and long-term trends in the ecological condition of wetland resources. EMAP-Wetlands will develop a wetland monitoring network and will identify and evaluate indicators that describe and quantify wetland condition. The EMAP-Wetlands network will represent a probability sample of the total wetland resource. The EMAP sample is based on a triangular grid of approximately 12,600 sample points in the conterminous U.S. The triangular grid adequately samples wetland resources that are common and uniformly distributed in a region, such as the prairie pothole wetlands of the Midwest. However, the design is flexible and allows the base grid density to be increased to adequately sample wetland resources, such as the coastal wetlands of the Gulf of Mexico, which are distributed linearly along the coast. The Gulf sample network required a 49-fold increase in base grid density. EMAP-Wetlands aggregates the 56 U.S. Fish and Wildlife Service's (FWS) National Wetland Inventory (NWI) categories (Cowardin et al. 1979) into 12 functionally similar groups (Leibowitz et al. 1991). Both the EMAP sample design and aggregated wetland classes are suitable for global inventory and assessment of wetlands.The research described in this report has been funded by the U.S. Environmental Protection Agency. This document has been prepared at the EPA Environmental Research Laboratory in Corvallis, OR, through contract No. 68-C8-0006 to Man Tech Environmental Technology, Inc. This paper has been subjected to the Agency's peer and administrative review and approved for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use.     

Ethical Considerations for Outcome‐adaptive Trial Designs: A Clinical Researcher's Perspective

In a typical comparative clinical trial the randomization scheme is fixed at the beginning of the study, and maintained throughout the course of the trial. A number of researchers have championed a randomized trial design referred to as ‘outcome‐adaptive randomization.’ In this type of trial, the likelihood of a patient being enrolled to a particular arm of the study increases or decreases as preliminary information becomes available suggesting that treatment may be superior or inferior. While the design merits of outcome‐adaptive trials have been debated, little attention has been paid to significant ethical concerns that arise in the conduct of such studies. These include loss of equipoise, lack of processes for adequate informed consent, and inequalities inherent in the research design which could lead to perceptions of injustice that may have negative implications for patients and the research enterprise. This article examines the ethical difficulties inherent in outcome‐adaptive trials.     

Alginate embedding and subsequent sporulation of in vitro-produced Conidiobolus thromboides hyphae using a pressurised air-extrusion method

Conidiobolus thromboides is an entomophthoralean fungus with potential as a biological control agent of aphids. However, its application in biological control is limited due to its formulation requirements. The objective of this study was to develop and optimise a novel air-extrusion method to embed C. thromboides hyphae at high density in alginate pellets. An orthogonal experimental design was used to investigate selected combinations of parameters known to affect hyphal density within pellets. The diameter of pellets produced, and the calculated density of hyphae within them, ranged from 0.18 ± 0.09 to 3.17 ± 0.06 mm and from 0.02 to 350.56 mg/mm³ respectively. These data were used to predict the optimal parameter combination to deliver the greatest density of hyphae of C. thromboides per pellet: 1% sodium alginate, a 1:2 ratio of hyphae to sodium alginate, an orifice diameter of 0.232 mm and an air pressure of 0.05 MPa. Pellets made under the optimal conditions predicted produced a mean total of 4.3 ± 0.6 × 10⁵ conidia per pellet at 100% relative humidity which was significantly greater than the mean total number of conidia produced from infected aphid cadavers of comparable size (9.35 ± 0.85 × 10⁴) (p < 0.001). In conclusion, air-extrusion embedding appears to be a promising method for formulating in vitro-produced hyphae of C. thromboides for use in biological control.     

Construction of Partially Balanced Incomplete Block Designs with Nested Rows and Columns

A number of methods of construction of partially balanced incomplete block designs with nested rows and columns are developed and new balanced incomplete block designs with nested rows and columns are obtained as a by-product.